If you want to prevent the tiles from falling off after home decoration, what are the specific pract

In the process of decoration, it is necessary to prevent the occurrence of safety accidents, and if you want to prevent the tiles from falling off, it is recommended to use professional cement, which has good glue strength and is more environmentally friendly. When choosing a tile adhesive, try to choose a big brand, so that the bonding effect can be guaranteed. If the paint wall is changed to tiles, it is recommended to clean up all the original paint and repaint the cement, so that it is more firm, and the tiles are also very safe, so as to ensure safety when decorating the home.

Many owners do not know the order of decoration when decorating, and the wall must be cleaned so that the cement can be absorbed by moisture. If there is no glue on the floor of the wall foundation, it is completely dependent on mud, and there is no way to bond the tiles if the humidity is not enough. To prevent the phenomenon of tile falling off, the treatment of the wall base layer before tiling is more important, and the master of the tile is also closely related.

Therefore, in addition to buying good floor tiles and viscose, you should also hire a very responsible tiler master. <>

When the void is relatively large, this kind of tile will be absorbed together with the cement mortar, and by penetrating into the void by the strong friction force, you can ensure that the solid adhesion of the tile and cement will not fall. Tiles can be performed with the right steps, such as uneven mortar fits, which can also be affected by the effect of tiling. If the worker's operation method is not correct, it will also lead to problems in the combination of the surface and the base layer of the tile.

If these methods are not treated, and you don't want the tiles to fall off, you must ensure that the tiles can be soaked for about two hours before they are pasted. In this way, the tile can be filled with a lot of water and will not appear bubbles, and it can be directly pasted through the internal air, which can prevent the phenomenon of hollowing, resulting in problems such as the tiles falling off in the later stage. However, if there is a big gap between the smoothness of some walls, you should use mud and mortar to level it.

Some owners don't understand, and the decorator will be cheated, so you must do more homework to prevent being deceived.

Clean the wall in advance, then plaster the cement, then soak the bricks on the wall in full water, add some glue in time, and finally carry out acceptance.

After laying the tiles, you can often wipe the tiles with a damp rag, or you can apply some glue, or put a basin of water next to the tiles, or you can wet the tiles with water, so that you can ensure that the tiles will not fall off.

The specific approach is, 1 wall bricks should be fully soaked in water, 2 first pave the ground, 3 clean the base layer in advance, so that it is not easy to fall off, sticky more firmly.

During the decoration process, to prevent the tiles from falling off, it is recommended to use special cement for home decoration for paving tiles. Good early strength, green environmental protection, tile adhesive is best to choose a big brand, good bonding effect and quality assurance. It is recommended to completely hit the paint layer until the red bricks are seen, and repaint to ensure that the cement mortar layer is firm and reliable before the wall tiles can be pasted.

For the hollow stucco layer must be shoveled off, repainted, to ensure firm, before the wall tiles can be pasted.

The base layer of the wall and ground must be cleaned, otherwise, the moisture in the cement will be absorbed, which will also cause dry cracking, hollowing, and falling off. The wall base and floor are not watered, which takes away the moisture in the mud, resulting in insufficient humidity during the setting time to adequately bond the tiles. If you want to prevent the tile from falling off, it is very important to treat the wall base layer before applying the tile, which is related to whether the tile is firmly pasted.

For this reason, if there are sundries such as lime plaster, latex paint and wallpaper on the wall, they must be cleaned up, otherwise the cement slurry will not be firmly attached to the base layer.

The pores are large and the water absorption rate is high. This kind of tile, the paving companion has always been cement mortar. As long as the tile absorbs enough water, the cement molecules can penetrate into the pores of the tile body through Brownian motion, thus forming a strong tooth joint friction to ensure that the tile is connected to the cement and will not fall.

If you don't follow the steps correctly when laying tiles, the tiles will also fall off. For example, the mix ratio of mortar during construction is not accurate, the mixing is uneven, etc., will affect the paving effect.

In addition, if the worker's operation method is incorrect, it will also affect the combination effect of the tile surface and the base layer.

If you don't want the tile to fall off, then before the tile is pasted, be sure to soak the tile in water for at least two hours, so that the inside of the tile is full of water, there will be no bubbles, otherwise there is air inside the tile to paste the phenomenon of hollowing, which will lead to the fall off of the tile. For walls with too much difference in flatness, cement mortar needs to be used for leveling.

We should pay attention to some problems when decorating, and secondly, we should also use more cement glue when combining tiles.

Use a strong adhesive to stick the tiles, and the tiles will not fall off later, and ensure that the humidity of the air in the home is not too high, so that the tiles will not fall off.

The tiles should be fixed, and the decorator should be glued more firmly when decorating.

When decorating, the sealing layer should be done, and the distance between the tiles should be ensured to be tight. At the same time, reinforcement work should be carried out. It is also necessary to ensure that you choose some tiles with better materials, so as to prevent them from falling off.

First of all, we should choose tiles with better materials, and we should also do a good job in the protection of tiles when decorating, and try to choose some tiles with better quality and high price.

You can put another layer of wallpaper on top of the tiles that have been pasted, so that the tiles can prevent them from falling off.

It is best to lay tiles in spring and autumn, the temperature in these two seasons is more suitable, and there must be gaps after the tiles are pasted, and the tiles must be soaked in water before they are pasted.

Ceramic tiles are the foundation of the whole home, and the base layer should be cleaned before tiling to prevent the tiles from falling off after home decoration. If there are lime plaster, latex paint, wallpaper and other decorations on the wall, or there is dirt on the ground, it must be cleaned up, otherwise the cement mortar will not bond firmly with the base layer; In addition, if there are cracks in the wall itself, they should be properly treated before tiling to prevent the cracks in the underlying structure from becoming larger in the future, causing the wall tiles to crack or fall off. Because the moisture content of wall tiles is very high, this feature must be taken into account when pasting.

And the emergence of this situation also caused a problem, that is, the wall tiles are not firmly pasted and can easily fall off. Therefore, we must master the method of sticking wall tiles to prevent the wall tiles from falling off. Place unpainted floor tiles on the ground.

After leveling, the cement slurry is sprinkled all over the floor tiles and spread on the ground. The four tiles are flush in a diagonal position. And the order of placement is also very particular.

Floor tiles should be pasted from the inside out. If there is a slope or floor drain on the ground, pay attention to find the slope according to the drainage direction. The bricks should be pasted from the bottom to the top, and the bottom bricks should be pasted later for the sake of beauty.

2.Tiles are not allowed on the wall until the strength of our wall plastering mortar is qualified. The way to judge is very simple, that is, use a nail and scratch it on the wall.

If a large amount of sand is shed, it is not strong enough. If you can only draw one white mark, it means that your strength is qualified. If the strength is not enough, it is recommended that you wipe it clean and then paste it until it is qualified.

3.Fill the tile gaps with a caulk seal and scrape them flat with a slurry. The color of the caulk needs to be similar to or uniform with the color of the tile to facilitate the formation of the overall decorative style.

Since the material is drier than usual, it is necessary to extend the time for materials that need to be soaked in water, such as floor tiles and tiles, to make them close to saturation with moisture. The above is the answer to the question of how to prevent tiles from falling off after home decoration because tiles are the foundation of the whole home.

We should pay attention to choosing some better materials, and we should also pay attention to using a scraper when decorating, and we should also pay attention to reinforcement when scraping flat. It is also necessary to carry out regular maintenance and care, who should carry out regular inspection and maintenance, so as to prevent falling off.

It is necessary to use good tile adhesive, so that it is not allowed to fall off, and it is also necessary to pay attention to the moisture-proof measures in the family, generally speaking, if our whole home is not particularly damp, the tiles will not fall off.

When pasting tiles, the surface must be paved, find very professional staff, use good materials, and air dry in time after pasting tiles.

Owners and friends who use tiles in the decoration will find that the house has lived for a long time, and the tiles have begun to fall off. In fact, I want to tell you that you don't have to worry about this kind of problem, as long as you know what is the reason for the tile to fall off, and how to deal with the tile falling off.

Clause. 1. Fall off and re-paste.

When the tiles fall off directly due to improper construction or aging problems, how to paste the bricks back again, in addition to the necessary basic process, there are also different treatment situations according to the mortar of the residual wall.

Clause. Second, the mortar is not loosened.

If the mortar is not loosened, but the tile falls off, you can first scrape the mortar adhered to the back of the tile and Shengzhishen, and then mix a little cement with 107 glue to stir it into a paste, evenly coat a thin layer on the back of the tile, and then press the tile to stick firmly.

Clause. Third, the mortar has peeled off.

If the mortar falls together with the tiles, it is necessary to gently chisel some pits on the original foundation surface, and then re-inlay the mortar mixed with 107 glue, and press the falling tiles on the foundation surface after brushing a layer until the mortar hardens. It should be noted that if the tiles are only partially falling off, do not hit the mortar on the foundation surface to prevent the original solid tiles from being loosened.

Clause. Fourth, the junction of the veneer is disconnected.

The old tiles are still intact, but they are disconnected from the joints, and the sand and plaster at the joints can be removed first, and then epoxy resin adhesive (all-purpose adhesive) can be injected into the joints.