When decorating, should you scrape putty or make cabinets first? Why?

When doing interior decoration, the usual step is to scrape putty first and then make cabinets. This is because scraping putty is the basic project of interior decoration, and its main role is to make the wall smooth and improve the decorative effect of the wall. If you make the cabinet first, the cabinet will occupy the wall after installation, making it difficult or even impossible to scrape putty.

In addition, if the cabinet is made first, the cabinet may be contaminated when scraping putty, affecting the appearance of the cabinet.

If you want to know the specific decoration**, you can use the "decoration artifact" ** device to calculate, just enter the area + city, immediately calculate the local decoration**, list the detailed list of 102 decorations, so that you don't have to worry about overspending on the decoration, click here to start calculating: [3 seconds to get the local decoration**].

In the local market, the ** of scraping putty is usually between 30-50 yuan per square meter, which includes the cost of materials and labor. The cabinet will be different according to the material, size and design complexity of the cabinet, generally between 300-800 yuan per square meter.

Therefore, it is recommended that when decorating, the putty scraping work should be carried out first, and then the cabinet should be made and installed. This not only ensures the decorative effect of the wall, but also avoids contamination of the cabinet when scraping putty. At the same time, it is also necessary to pay attention to choosing the right scraping putty and cabinet making services to ensure the quality and effect of decoration.

Tuba Rabbit is one of the largest decoration platforms in China, with a total of more than 41 million owners, 110,000 decoration companies, covering more than 300 cities across the country, user reputation is very good, not only to meet your decoration needs, but also to provide professional decoration companies according to your budget, want to find a good company, learn more about decoration knowledge on Tuba Rabbit, click here, free 1 to 1 for your home decoration services: [Tuba Rabbit ** official website].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

Generally, the carpentry begins to work on the brick, and the task of the carpenter is to suspend the ceiling and hit the cabinets, because the cabinets are made of carpentry, and some details are not easy to deal with, such as the uneven wall, or the wall is tilted, and the carpentry can not be tilted when the cabinet. If there is a gap between the wall and the cabinet, it will be treated by a painter if it is covered with foam glue. Some friends also hope that the back cabinets can be recognized, which is also possible, generally the ceiling first, and then the cabinets, now the cabinets are cut by the factory, the edges are sealed, and the site is pulled down and assembled by the carpenter.

It will take a few days in between, during which time the painter can be present to flatten the wall first, blow putty, and wait until the cabinet is processed, and the gaps in the wall assembled on site can be treated more perfectly. This is about the decoration process, because the customization cycle is long (generally about 30 days), and after the bricks are finished, the cabinets, doors and windows need to be measured (the window cycle is about 20 days). Plastering brick carpentry also has to play, the general carpentry cycle is about 7 days, and then the painter, the painter cycle is about 15 days, this time it is a door-to-door installation, and after installation, it is almost a cabinet to the site.

The painter makes every effort, the wall and the top surface will be smooth, and it is not difficult to install the cabinets.

I think the two kinds of work can be cross-worked, you can scrape the putty 1 or 2 times, and then make the cabinet on the spot, and wait for the last putty construction after the cabinet is completed! This action handles the gap between the cabinet and the wall (except for mobile cabinets or custom cabinets) to achieve a dense effect of the cabinet and wall blending. But there are also certain drawbacks in such a sequential operation, that is, when the final wall is decorated, the KGI collision may cause damage to the cabinet, so we must take protective measures and don't be careless during construction, after all, it will be damaged to everyone, right?

For such a thing, there are advantages and disadvantages to whoever does it first and who does it later, and it is up to the site and the specific situation to decide how to get the benefits!

According to the normal procedure, it is after the completion of the floor decoration (tile paving) that the carpenter enters the site, at which point the top decoration of the wall cabinet and a cabinet that should be done have been completed, and only then let the painter enter the site to complete the putty batch blowing or some other materials for the wall decoration. Of course, if the floor decoration is made of wooden floors, it can also be arranged after the cabinets are made. In such a way, the occupancy of the cabinet does not require floor decoration.

The advantage of this is that the cost of ground renovation is reduced!

It is definitely necessary to scrape the putty first, which is a correct decoration step, and then you can make a cabinet after scraping the putty. to keep the cabinet clean and tidy. And it will also depend on the relevant flatness.

You should scrape putty first and then make a cabinet, in general, it is a custom cabinet, which will be done according to the appropriate size, and then after the cabinet is made, the home has basically been finished.

You should scrape the putty first and then make the cabinet, which will comply with the procedure, and the overall effect will be better, and it will also make the wall color of the home uniform.

Do not brush putty behind the cabinet, and scrape putty powder on the back wall of the wardrobe. Personally, it is recommended not to scrape, if it is scraped, the putty placed behind the cabinet will be damp and smelly after a long time. The process of painting the wall is to level the wall with plaster, scrape the putty 3 times, polish it with sandpaper, fine treatment and polish, and then use latex paint 2 times.

<> two coats of putty powder should be scraped on the back wall of the wardrobe. One of the most important features of putty powder is that it can be used in a humid or ventilated environment, but it can cause some harm to the air. If the wall is moldy and peeling off, you can remove all the putty powder on the wall, then paste the wallpaper, and then wet the wall.

This avoids this phenomenon. The putty on the back of the closet is applied before painting. Generally, the substrate is evenly applied first, and then sanded with a scraper or sandpaper to achieve a smooth and smooth effect.

It should be fine. If it is a new wall, you need to scrape putty first, and then apply latex paint.

Putty powder is a building decoration material, and the main ingredients are talcum powder and glue. I just bought a layer of white putty on the surface of the blank room, usually the whiteness of the putty is above 90 and the fineness is above 330. Putty is a substrate used for wall repair and leveling, laying a good foundation for the next step of decoration (paint and wallpaper).

There are two types of putty: interior walls and exterior walls. The exterior wall putty should be resistant to wind and sun, so the rubber has high performance, high strength, and a slightly lower environmental protection index.

The comprehensive index of interior wall putty is good, healthy and environmentally friendly, so the interior wall is not used externally, and the external wall is not used internally. Usually putty is gypsum or cement-based, so the surface is rough and easy to bond firmly. However, during the construction of the base layer or brush a layer of interface agent to seal the base layer at the same time, improve the adhesion of the wall, so that the putty can be better bonded to the surface of the base layer.

The wall on the back of the wardrobe can be scraped with putty powder 2 times, and if it is not sanded, it can be painted directly. Because the construction of putty is a very troublesome thing, if the requirements are relatively simple, you can use 801 construction glue to stir the putty powder of latex paint on the wall, and then swing it in batches.

It must be scraped, scraping putty can make the wall look more flat and smooth, and it is also convenient for the wall to be painted with latex paint and wallpaper wallcovering. The flatness of the wall is improved, and it is not easy to accumulate dust, making it easier to clean.

The difference between brushing putty and not brushing is that it is not so easy to accumulate dust after brushing, and it is easy to accumulate dust without brushing.

You can look at the design method, try to brush it, and it may be used for a short time if you don't brush it. Personally, I think it's better to brush.