Home decoration, those things are the decoration is to scrape putty first or make cabinets first?

In the process of home decoration, scraping putty or making cabinets first is a question that needs to be decided according to the actual situation. Generally speaking, we would recommend scraping putty first and then making cabinets.

With the decoration device, you only need to enter the area + city, and calculate the most affordable local market in 3 seconds**: [Tuba Rabbit Big Platform Counts**].

No longer worry about the company's price increase, omission and price increase.

Scraping putty is a part of wall decoration, mainly to make the wall more flat, and provide a good foundation for subsequent paint or wallpaper laying. If the cabinet is made first, it may have a certain impact on the putty scraping work, for example, the cabinet may block part of the wall, making the putty scraping work impossible. In addition, a large amount of dust may be generated during the putty scraping process, which may cause contamination to the surface of the cabinet if it has been done.

In the local market, the putty scraper is usually between 30-50 yuan square meters, while the cabinet will be different according to the material, design and process, generally between a few thousand yuan and tens of thousands of yuan.

Therefore, we suggest that during the decoration process, the wall should be scraped putty first, and then the cabinet should be made and installed after the wall decoration is completed. This can not only ensure the decoration effect, but also avoid unnecessary troubles and costs. At the same time, it is also necessary to pay attention to choosing the right materials and design to ensure the quality and aesthetics of the cabinet.

If you want to make the wardrobe and the wall connect well, you must install the wardrobe first, but the reality does not allow it, and now the vast majority of owners will choose to customize the whole house.

Merchants are directly in the factory to do a good job of wardrobes, directly in the house to assemble, eliminating the need to process the board in the house.

A series of complex processes such as brushing paint. Choose the whole house customization, their production is periodic, generally takes 25-40 days, some manufacturers are in the house to paste the wall tiles and floor tiles.

After the ceiling is done, the size is determined, and the design is done after the production begins, but there are also some brands, they will only measure the size after scraping the first putty, and then start customizing, in their words, so that the size will be more accurate. No matter what kind of measurement method, within 25-40 days of cabinet processing, you can't stop work, and generally continue to build the wall and scrape putty.

and brush latex paint.

Wait until the wall work is finished before installing the cabinets.

So if you install the cabinet first and then scrape putty and brush latex paint, is it good? I told you at the beginning, it must be good, so that the house decoration time will be longer, after the tile is pasted and the carpentry work is done, wait for the cabinet to be installed and then start scraping putty and brush latex paint, but this is unacceptable to many owners, it was expected that the construction period would be two months, if this construction may have to be pushed to three or four months. Now only the on-site wardrobe, under the premise of not delaying the construction period, but also able to make the cabinet first and then scrape putty and brush latex paint, but many owners do not like the wardrobe made on site, it feels a little "soil", I feel that the design is not good-looking and the edge of the wardrobe is not good.

In fact, it mainly depends on the worker, assuming that the interior design of the favorite cabinet is taken and the carpenter master does it on site, the effect should be no worse than the customized, anyway, the door panel or the sliding door.

All need to be customized, and do not need to be done on site, as long as it can solve the problem of design and edge banding, it is also a good choice to find a carpenter master to make a wardrobe on site.

Now the most mainstream way is to scrape putty and brush latex paint, and then install the cabinet, this method can be given to the construction party in advance to make the wardrobe place, the need to level the place in advance, to avoid the situation that the wardrobe and the wall are not well connected, if there is no problem, whether it is installed in advance or behind the installation of the wardrobe, there is no problem.

Of course, it is to scrape putty first, even if the furniture is custom-made, first do the wall and ground well, and then make the furniture, otherwise if you want to move the position of the furniture in the future, the wall and the ground will be ugly.

Make the cabinet first. Because the wall will be damaged when making cabinets, you can't scrape putty first.

If you are making a cabinet directly on the wall, you need to make a cabinet first, then cover the cabinet, and then scrape the putty, so that the cabinet is stable and fits firmly with the wall.