The practice of jack o lantern is handmade, and how to make jack o lantern handmade

First, draw your favorite pattern on the pumpkin, cut the pumpkin open, carve it according to the pattern, and hollow out the inside. Then hollow out the other half of the interior and light the candle and put it inside. Finally, use a toothpick to secure both sides, and the jack-o-lantern is complete.

Halloween jack-o-lanterns.

Ingredients: :**1 pumpkin

Tools Required: 1 fruit knife, 1 spoon, 1 watercolor pen, 1 lantern or candle.

Specific production steps]:

1.Prepare a yellow beibei pumpkin, and try to choose a pumpkin with a regular shape, smooth surface, and a better appearance.

2.Draw a circle on the top of the pumpkin with a watercolor pen, the circle does not need to be too big, the size of the spoon can fit in.

3.Cut the top of the pumpkin with the tip of the knife along the lines drawn.

4.Then use a spoon to hollow out all the pumpkin seeds and pulp inside, and dig out the pumpkin flesh on the inner wall to make it easier to transmit light, but be careful not to dig it out.

5.Use a pen to draw facial expressions on the side of the pumpkin, you can find an existing jack-o-lantern to draw it against, or you can DIY it yourself.

6.Then use a knife to hollow out the eyes, nose and mouth, which is a bit difficult, requires patience, and be careful not to hurt your hands. When Dabao was done, it was already night, the light was insufficient, and the color changed when it was photographed.

7.Prepare a lantern that you can put in the pumpkin, then cover it, and the jack-o'-lantern is ready.

Tips]:1It is best to put that kind of small lantern in the jack-o'-lantern, children want to play, and it is not safe to put candles.

2.It is more convenient to use a serrated knife than a regular fruit knife.

3.Do not use a marker pen for drawing expressions, as it is difficult to wipe it clean if you make a mistake and want to redraw.

First, draw your favorite pattern on the pumpkin, then use a knife to cut a small hole from the top, hollow out the inside with a spoon, and then carve the facial features into a hollow state. Such a vivid jack-o'-lantern is ready, and then a candle is placed inside, and it is very kawaii to light it at night.

Pumpkin, knife, spoon, pencil or marker.

01 Choose a brightly colored pumpkin with a round shape. First, use a pencil or marker pen to draw a grimace on the surface of the pumpkin, and depending on your personality, you can draw a smiley face or other vivid expressions.

02 Use a knife to cut a small round lid on the top of the pumpkin. Approximately 5 cm in diameter, keeping the cut flat surface.

03 Gently remove the small lid and gently pull out the seeds and pulp with a small spoon to make the skin as thin as possible.

04 Use a knife to carve a hollow state according to the painted expression, and the knife must be sharp so that the facial features can be carved into a smooth shape.

05 After carving the facial features, the pumpkin is finished. The next step is to put a small candle inside, light it, and a cute jack-o-lantern comes to life.

Here's how to DIY jack-o'-lanterns:Ingredients: 1 pumpkin, 1 pen, 1 knife, 1 spoon.

Steps: 1. Pick a pumpkin of the right size at the market and prepare a pen and knife.

2. Draw a figure on the top of the pumpkin, use a pointed knife to trace the handwriting and cut out the top.

3. Cut out the pumpkin seeds and hollow out the pumpkin.

4. Draw the face shape you like to want, including eyes, nose and mouth.

5. Use a knife to cut out the pattern according to the scribing line, and wipe the handwriting on the outside of the pumpkin with two drops of water with a paper towel.

6. Wipe the candle and turn off the light, a cute homemade pumpkin lantern.

The ingredients used to make Halloween jack-o'-lanterns are very simple, that is, a pumpkin, a knife, a marker, a candle and petroleum jelly or an appropriate amount of diluted lemon juice. Here's how it works:

1. Choose a round pumpkin and cut a hat at the end with the handle, and try to keep the cut surface as flat as possible. The cut lid can be kept as a hat.

2. Take out the pumpkin pulp with a spoon or hand, select the place to be carved, and scrape the skin thin.

3. Use a marker pen to draw a grimace or your favorite pattern on the melon skin, carve along the outline of the pattern with a knife, and wipe off the remaining handwriting when finished.

4. In order to prolong the life of the jack-o'-lantern and avoid drying and dehydration, apply petroleum jelly or dilute lemon juice on the incision and inside of the jack-o'-lantern to lock in the moisture of the pumpkin and slow down its drying speed, so that it can be stored for a longer time.

5. Fix the candle and pumpkin at the bottom with a toothpick, light it, and you're done.

Jack-o-lantern handmade method:Materials required: cardboard, glue sticks, tool knives.

Specific steps: 1. First prepare a few pieces of jammed paper.

2. Use a knife to cut into small strips of the same size.

3. Prepare another piece of cardboard and draw a circle.

4. Then cut it with scissors, you need to cut two.

5. Prepare solid glue, take one end of the cut strip and glue it to the round cardboard with solid glue.

6. The other end is glued to the other round cardboard.

7. Next, draw a leaf and a leaf with green colored paper.

8. Cut out the corresponding shape according to the figure.

9. Glue together.

10. Finally, cut out the eyes, mouth and teeth with black cardboard.

11. Glue on the front of the lantern, and the whole jack-o'-lantern is completed.

Halloween is just around the corner, and jack-o-lanterns are a symbol to celebrate Halloween. Below I have compiled for you how to make jack-o'-lanterns, I hope it will be helpful to you.

Jack-o-lantern steps:1.Wash the pumpkin and gently line the pumpkin.

2.Place the top one first'Pull out the lid, then pull out the eyes, nose, mouth, and finally hollow out the inside of the pumpkin.

3.Repair type, rinse well, light a candle or a small light bulb, and use it to cook later (if it doesn't leak).

The process of making jack-o'-lanterns is as follows:

Step 1: Choose a style to carve a pumpkin, such as classic smiley faces, monsters, witches, cats, and more.

Step 2: Choose a pumpkin shape. Surface:

Try to pick a smooth, flawless surface for easy engraving. With a tap of your finger, a ripe pumpkin can hear the hollow. The sturdy stems are also an indication that the pumpkin is healthy.

Size: Choose a pumpkin that is at least 9-10 inches tall so there's plenty of room for the candle to burn safely. The most important point:

Choose a pumpkin with a stable bottom. Balance is important; A solid bottom that supports the pumpkin means less chance of tumbling or tipping over.

Wash the pumpkin first and dry it thoroughly. Before you start carving, let the pumpkin sit at room temperature for a while, clean pumpkins will last longer.

Step 3: Keep track of the pumpkin shape you've made. If you don't need a design tool, you can use a washable marker pen to draw an outline on the surface of the pumpkin, and if you're using a mold design, enlarge or shrink the design to fit your pumpkin size.

Print the mold and paste it onto the surface you want to engrave. And follow the design line, using an awl or a thin screwdriver to make holes in about 1 8 inch intervals on the design line. Delete the mold pattern when you're done.

Step 4: Cut out the top. Use a pen to draw the shape of a lid on the top of the pumpkin (the end with the handle), usually round and petal-shaped.

Use a sharp knife to tilt a round hole in the top of the pumpkin towards the center, and tilt the handle of the knife 30° towards the outside of the pumpkin, so that the cut out lid is large at the top and small at the bottom, and it is easy to take out, and when the lid is placed back on the pumpkin, it will not fall into the pumpkin. Note: Always be careful when using a knife.

The most important thing about the jack-o'-lantern is the pumpkin lid, if you find that the lid will fall into the pumpkin after making the jack-o'-lantern because of sloppiness, it will be very embarrassing. So the lid should not be too large, you can put your hand into the pumpkin immediately.

Step 5: Hollow out the pumpkin belly. Use a spoon to carefully remove the seeds and sacs.

Pumpkin seeds can be saved as roasted pumpkin seeds, which is how pumpkin seeds are roasted.

Step 6: Engrave the pattern. Engraving from the center outward, avoiding putting pressure on the area that has already been carved.

When moving up and down, make sure the saw is perpendicular to the pumpkin. Apply gentle pressure, then remove and reinsert the knife to create an angle; Do not twist the blade. Use your fingers to carefully push out the cut from the inside.

Step 7: Interesting stretching. When digging eyes and teeth, there is no need to dig through, only one layer of the epidermis needs to be removed.

Then draw stars and peach hearts on the side, and then remove the skin. The contrast between the skin and the flesh of the melon will create interesting colors and light effects, and the removed skin will cause a color change when the pumpkin is lit.

Step 8: Light it up. The lamp is placed and lit after all the engraving is done, and the lantern can be illuminated with a battery-powered lamp or candle. When the smoke of the candle blackens the lid or the spot on the top, use a saw to cut a 1-inch diameter hole in that spot as a chimney.

Step 1: Prepare a pumpkin.

Step 2: Carving knife + colored pen.

Step 3: Draw an outline on the surface of the pumpkin.

Step 4: Carefully open the hole at the top of the pumpkin, pay attention to the strength, and it is best to warp the lid outward. (It's not easy to take it out if you drop it).

Step 5: Scoop out the pumpkin seeds with a spoon and scrape the patterned side for easy cutting.

Step 6: Be careful not to cut off your teeth.

Step 7: Light the finished product with a candle.

Step 8: Turn off the lights for better results.

Step 9、Cute Halloween jack-o-lanterns are ready。

Jack-o'-lantern

jack-o'-lantern or jack-of-the-lantern, the former is more commonly known and is an abbreviation of the latter) is a symbol of Halloween celebration. About the jack-o's English name "jack-o."'There are many versions of the origin of the "-lantern", the most popular of which is an Irish folklore from the 18th century.

Legend has it that there was a man named Jack (in 17th-century England, people usually referred to a man whose name was "Jack") who was very stingy, and had a habit of mischievous and alcoholic, because he had played a prank on the devil twice, so when Jack died, he found that he could neither enter heaven nor hell, but could only wander between the two forever. The devil, out of mercy, gave Jack a little coal, and Jack lit the turnip lamp with the little coal the devil gave him.

Jack-o-lantern method:

1 Preparation: pumpkin, knife, candle, small fork.

2 Draw an outline with a marker.

3 Carve along the contour with a knife.

4 Use a knife to carve out the top of the jack-o'-lantern's head and hollow out the pumpkin.

5 Put the candle in the jack-o'-lantern and light it so that the beautiful jack-o'-lantern is ready.