The windows are soundproofed, no worries on the weekend! How do you ensure the sound insulation of y

The windows are soundproofed, no worries on the weekend! How do you ensure the sound insulation of your windows? Personally, I think that the window is soundproof, first of all, you can choose a double-layer insulating glass window, but it is relatively more expensive, and the thickness of the wall is slightly thicker, and secondly, you can choose a closed or single-opening window.

Anyone who has stayed in a hotel should know that they use this method of indoor soundproofing to prevent noise from cars passing on the road. The second point is to choose curtains with thicker cotton, because curtains are also soundproof, preferably the kind that falls vertically from the top of the floor. If it is a broken bridge aluminum window frame sound insulation effect is poor, if the closure effect is good, it can also play a great sound insulation effect, there is a three-layer glass window, the sound insulation effect is very good, the minimum is two layers, be sure to seal the surroundings tightly, the door can also be wrapped, the wall has a sound insulation board, and then the upper and lower floors, the roof can also be treated with sound insulation boards, the ground can be decorated with a layer of sound insulation boards, and then paved with floor tiles or floors.

Affix window soundproof film; When using sound insulation film on a building, it can not only have visible light transmission performance, but also maintain a clear line of sight without blocking the visible light transmittance of the building. And the method of sticking the film is also very simple.,Just like the mobile phone film.。。 Install window soundproof seals; Acoustic seals, which are only effective for poorly sealed windows, are also very cheap.

The sealing strip is to plug the gap in the window, which has the same effect as the soundproof cotton. converted into soundproof windows; If the window sill in your home is not wide enough, you can remove the original window and replace it with a layer of low-frequency soundproof windows. This can also help to cancel out the noise, but it does not completely isolate the sound.

add a layer of ordinary plastic steel windows; This method is suitable for outdoor traffic noise is not particularly serious, if there is a wide window sill at home, you can add a layer of ordinary plastic steel windows on top of the original windows.

In order to ensure the sound insulation effect of windows, you need to pay attention to the following two aspects when purchasing:

1. Look at the specifications of the profile.

The specifications of the profile are different, the sound insulation effect of the window is also different, taking the broken bridge aluminum profile as an example, there are mainly a variety of specifications, in order to ensure its sound insulation effect, it is recommended to choose the profile of the 90 series, the high-rise 10 floors and above the 105 series, and the villa to choose the 110 series.

2. Look at the material of the sealing strip.

Sealing strip plays an important role in the sound insulation effect of the window, the sealing strip material used in the window when purchasing, generally speaking, the EPDM material is more elastic than PVC adhesive strip, not easy to deform, break, and more soundproof.

Summary: If you want to choose a window with good sound insulation, start from the above two points to ensure that there is no mistake.

You can use some soundproof windows, so that you can apply high-tech soundproofing very well and play a good role in soundproofing.

If you have the money, you can install specially soundproof glass. Usually, people can only close the windows as tightly as possible and try to insulate the sound.

Glass must be chosen very well, he has a great guarantee effect on safety. At the same time, it should also be better sound insulation and other measures to ensure it.

Our parents were very tolerant of noise, and even liked the kind of "unquiet" day and night, but now people can't tolerate noise, in addition to pursuing peace of mind, we also want to be quiet. Windows are the place where noise can take advantage of the situation, and to eliminate noise, it is necessary to make the windows fully soundproof. Let's ask professionals to introduce a good way to insulate windows, friends may wish to try it.

Our parents were very tolerant of noise, and even liked the kind of "unquiet" day and night, but now people can't tolerate noise, in addition to pursuing peace of mind, we also want to be quiet. Windows are the place where noise can take advantage of the situation, and to eliminate noise, it is necessary to make the windows fully soundproof. Let's ask professionals to introduce a good way to insulate windows, friends may wish to try it.

Window frames should be selected for window soundproofing

At present, aluminum alloy is generally used for window frames, but aluminum alloys are single cavities, and the walls are relatively thin, and the sound is easy to penetrate. In contrast, the plastic steel profile is multi-cavity, and the wall of the plastic steel window is thicker than that of the aluminum alloy, and the sound is less likely to penetrate from the profile.

Window soundproofing with soundproofing strips

Aluminum alloy window frames are generally equipped with rubber sound insulation strips or wool sound insulation strips, but wool sound insulation strips are easy to dehair after a long time, and rubber is easy to harden and age after being exposed to wind and sun and rain for a long time. Therefore, the window soundproof strip should not only prevent aging but also maintain toughness. At present, there is an imported soundproof strip on the market, which is wrapped in leather material on the outside and sound-absorbing cotton on the inside, which not only maintains toughness but is not easy to age, and ensures the sealing of the sound leakage point of the window frame.

Soundproof glass for windows

The glass with sound insulation effect includes insulating glass, laminated glass, vacuum glass, and most of the professional soundproof windows use laminated glass and vacuum glass. Vacuum glass uses the principle that vacuum cannot transmit sound, aiming at various frequencies of noise, and can reduce noise by 30-40 decibels after installation. If the building is more than 20 floors and there are no trains, large trailers, etc., you can consider choosing insulating glass or laminated glass, and the sound insulation effect is almost the same.

If the floor is low and there is a road or viaduct and there are low-frequency noise sources, then it is necessary to consider using vacuum glass or composite three-layer soundproof glass, so as to completely solve the noise problem.

The windows are soundproofed and sealed

When installing windows, there will be some small gaps left around the window frame, so be sure to glue the window frame around it with glass glue. The sealing around the window frame seems simple, but it still needs to be done by professionals.

Retrofit windows into soundproof windows

If you hate noise, it is good to install soundproof windows directly, now mainly use double-layer hollow windows for sound insulation, this double-layer hollow windows can play a role in isolating traffic noise, but in terms of sound insulation effect, it is worse than installing a layer of soundproof windows. However, the installation of soundproof windows requires a wide enough window sill at home. If you feel that the ventilation of the additional layer of soundproof windows is not good enough, you can also remove the original windows and replace them with a layer of low-frequency soundproof windows.

If the window is not soundproof, in fact, because of the problem of this material, I did not choose to use soundproof glass at the beginning of the decoration, and the later remedy can only replace the window.

If the windows are not soundproofed, you can put some soundproof cotton. Putting a seal on the window will make the sound insulation in your home better.

Then you can remedy it from the aspect of glass and window frames, and choose materials with better sound insulation. The sound insulation of double-glass single insulating glass will be better.

1. Paste the window sound insulation film.

The sound insulation film is a multi-layer structure, with a polyvinyl butyral (PVB) layer sandwiching the sound insulation resin in between. Window soundproof film is relatively cheap, and the usage is the same as mobile phone film.

2. Install the window soundproof seal.

The sealing strip is to plug the gap in the window, which has the same effect as the soundproof cotton.

3. Add a layer of ordinary plastic steel windows.

This method is suitable for the situation that the outdoor traffic noise is not particularly serious, and the window sill at home is relatively wide, you can add a layer of ordinary plastic steel windows on the inside or outside of the original window.

4. Add a layer of soundproof windows.

Soundproof windows are generally composed of double or triple layers of glass of the same texture or glass of different thicknesses and window frames, and the glass used will be thicker than ordinary window glass.

Windows are a necessary passage for indoor and outdoor air circulation, and of course, they are also a channel for noise transmission. In order to have a quiet home environment, the sound insulation of windows must be guaranteed. Method 1:

with soundproof curtains; If the windows can't be replaced, it is recommended to replace them with soundproof curtains, the effect will be a little better. If the curtains are drawn, it will be much quieter than not, which proves the effect of soundproof curtains. Method 2:

change the glass; If you can change the glass, you can choose double-layer laminated glass. Equipped with good window profiles, do a good job of window seam sealing, double-layer laminated glass can often achieve a better sound insulation effect. Method 3:

converted into soundproof windows; If the window sill at home is not wide enough, or you feel that the ventilation performance of adding a layer of soundproof windows is not good enough, you can also remove the original windows and replace them with a layer of low-frequency soundproof windows. Now the main use of double-layer hollow windows for sound insulation, this way can also play a certain role in isolating traffic noise, but in terms of sound insulation effect, it is worse than installing a layer of soundproof windows. Method 4:

Affix window soundproof film; The sound insulation film is a multi-layer structure, with a polyvinyl butyral (PVB) layer sandwiching the sound insulation resin in between. Thermally insulating particles (insulating particles) are evenly distributed throughout the interlayer. When using acoustic membranes in buildings, the high-performance interlayer sandwiched between the membranes provides visible light transmission, so it does not block the visible light transmittance of the building and maintains a clear line of sight.

Window soundproof film is relatively cheap, and the usage is the same as mobile phone film. Method 5: Install the window soundproof seal; Soundproof seals are only effective for poorly sealed windows, and they are also very cheap, but it is necessary to determine whether the lack of sound insulation is caused by the large gap in the window, otherwise it is useless to paste it.

The sealing strip is to plug the gap in the window, which has the same effect as the soundproof cotton. Method 6: Add a layer of soundproof windows; Soundproof windows are generally composed of double or triple layers of glass of the same texture or glass of different thicknesses and window frames, and the glass used will be thicker than ordinary window glass.

However, the ** of this kind of soundproof window is usually 800 yuan square meter 1300 yuan square meter, and the ** with ventilation device is higher. When consumers buy, it is best to ask the merchant for a test report and check the amount of sound insulation to judge. In addition, it is best to agree with the merchant in the contract about the sound insulation effect to be achieved after the installation of soundproof windows.

Method 7: Add a layer of ordinary plastic steel windows; This method is suitable for the situation that the outdoor traffic noise is not particularly serious, and the window sill at home is relatively wide, you can add a layer of ordinary plastic steel windows on the inside or outside of the original window. Plastic steel windows should be selected with good sealing, and the cavity distance between the two layers of windows should be more than 10 cm.

Casement windows are better sealed than sliding windows, so it is best to choose casement windows for additional windows. This kind of plastic steel window is relatively low in cost. If you want to reduce the impact of noise in the most cost-effective way, consider putting a soundproof film on the glass first, then a sealing strip on the window gaps, and then a curtain with good sound insulation.

The operation is simple and easy, and it is inexpensive.

The sound insulation of windows in the home is very important, because it communicates with the outside and is the weak link of sound insulation. The sound insulation of windows is the same as that of doors, depending on the thickness of the glass and the degree of sealing between the sash and the frame. When we live in high-rise buildings, we will find that why electric heating and air conditioning do not work, the key is that the insulation and thermal insulation effect of doors and windows are too poor.

The reason for this is that the tightness of the doors and windows is too low. Hot or cold air can enter directly through the gaps, and the cold or hot air in the room overflows severely. Even with good equipment, it won't solve the root cause.

Much of the energy is still slipping away. Doors and windows with low tightness not only save energy and reduce consumption, but also have unsatisfactory sound insulation effects. The sound insulation of holes and gaps is also related to the wavelength or frequency of the incident sound wave, because the higher the frequency, the shorter the wavelength, so for high-frequency sound, even if the gap is small, it will be detrimental to the sound insulation.

The level of sound insulation of doors and windows is also closely related to the thickness and configuration of the glass. Because sound insulation basically follows the law of quality, that is, the greater the mass, the higher the amount of sound insulation. Nowadays, doors and windows are basically double-layer insulating glass configurations, but there are two main reasons why they still can't achieve the ideal sound insulation effect.

1. The spacing between the two glasses is too small to achieve the effect of buffering and consuming sound. Second, the sealing performance is too poor, and the sound can enter directly from the gap, so the ideal effect cannot be achieved. In addition, the sound insulation of doors and windows also has a non-negligible relationship with the selection, production and installation of profiles.

Therefore, to improve the sound insulation of doors and windows, it is necessary to consider the whole, and the neglect of any link will cause the reduction of sound insulation. Nanjing Haoxiang Sound Insulation Project, a professional manufacturer and installation enterprise of soundproof doors and windows, provides you with a full range of services. Noise is harmful to health, install Nanjing Haoxiang soundproof windows and soundproof sealing strips.

What are the best ways to insulate windows? The master will teach you four tricks so that you will never be woken up again!

Laminated glass will do.

Principle or reason: Most of the noise outside the window is low-frequency noise such as automobiles, and the low-frequency noise is attenuated by the principle of resonance.

Therefore, it is recommended that the outer layer be 6 mm + 5 mm to form the laminated glass, followed by the hollow layer. If it is also strengthened, the inner glass can also be 6 mm + 5 mm.

Advantages: The glass is very strong, there is no laminated layer on the outside, anti-smashing and anti-theft, and it is very effective in reducing noise. All the glass in my house is laminated glass, and the interior is very quiet.