What is the experience of being burned with a red soldering iron?

The meat is mushy, it hurts and hurts, it's an indescribable pain, and it feels like it's better to cut the meat off with a knife. And the wound is not easy to heal, and even if it is healed, there will be a wound in the future.

First I smelled the mush, then my hand threw away the soldering iron like an electric shock, and then I realized that I had scratched the soldering iron!

I was burned before, and it felt very serious, especially the back of my hand was so hot that it seemed that the skin had melted off, and there was a red one next to it.

I have been scalded many times with an electric soldering iron, and it hurts, much more painful than cutting with a knife. Rinsing with cold water is much better, and it hurts after a few seconds of leaving the cold water.

I was accidentally scalded by an electric soldering iron before, it was not heavy, and it began to burn the skin, and then it slowly blistered, and after rinsing with cold water, I have now rubbed the scalding cream, and now I don't touch it, it is not very painful.

I felt that a piece of meat was roasted, and then it hurt heartbreakingly, and it felt hot, and I couldn't lower the temperature.

I haven't experienced it, but after watching the anti-Japanese war drama in the TV series and being burned, I screamed, and then I felt that the meat seemed to be burnt.

Generally, the steel will be slightly red after heating to 700, and as the temperature rises, the red color will become more and more vivid until it will melt after incandescent.

The melting temperature is different, the melting temperature of pure iron is 1538, and with the increase of the amount of carbon in the iron-carbon alloy, or the increase of other elements in the tung line, the melting temperature of the steel is reduced and low, and the lowest melting temperature of the super-eutectic steel is 1148.

Most of the iron commonly used is subeutectic steel. The range of discoloration is about 700-1270.

The stove for the fire is iron, and the surface is particularly hot, what can be done?

The stove for the fire is iron, and the surface is particularly hot, what can be done? Hello dear, the method of applying heat insulation to the surface of the iron furnace: the temperature of the outer wall of the iron furnace is usually high, and it is necessary to use paint that can withstand high temperatures.

W61 high-temperature resistant paint is specially used for anti-corrosion coating of iron furnaces, pot furnaces, heating furnaces, etc., with heat resistance of 200 degrees to 1200 degrees, and the paint film does not change color, does not fall off, and is anti-corrosion. Under the 6 times of cold and hot cycle test, the paint film is intact and the slag is thought of, which has a very good protective effect on the iron furnace and avoids rust and corrosion. It can be used both on the outside and inside of the furnace.

More than 700 degrees Celsius, not more than 1000 degrees Celsius. Generally speaking, a coal stove can burn iron red. As you can imagine, the temperature will not be too high. The melting point of iron is 1535 degrees Celsius.

Professionally, the melting point of iron is 1535 degrees, the melting point of steel is 1515 degrees, and iron is dark red at 600 degrees; At 800 degrees, iron is orange-red; At temperatures above 900 degrees, iron is orange-yellow to bright yellow.

Therefore, it is relatively clear how much temperature the red-hot iron has, hehe.