Is there any useful way to renovate an old wall at home?

Is there any useful way to renovate an old wall at home? Second-hand house wall renovation is recommended to use wallpaper, high, medium and low grades, new house wallpaper is prone to problems, second-hand housing after a few years, the moisture content and shrinkage of wall materials have been stabilized, after construction, the quality can be guaranteed, but the wallpaper viscose must be environmentally friendly, harmless to the human body products, good use of imported glutinous rice glue, after construction can live. If the economic conditions allow and the house space is large enough, the integrated wall decoration of factory production can be considered, on-site assembly, short construction period, and diverse materials.

The renovation of the wall of the old house should start from the following aspects: first of all: eradicate the old putty layer, this shovel is particular, can not be one-size-fits-all, the exposed wall of the house and the inner partition wall should be treated differently, the exposed wall shovel should pay attention to see whether the shovel is waterproof protective layer, if so, pay attention to protect this layer when shoveling, and shovel the wall to the end.

The second is waterproofing, there are two places whether they have been waterproofed or not, and then do waterproofing, one is the waterproofing of the exposed wall, and the other is the wall of the bathroom. The third step is to apply the boundary agent. The fourth step is to paste the anti-crack net, all the walls are topped, if the old house is a preset board structure, you also need to deal with the preset board joints and then cover the net.

The fifth step is to level the bottom putty. The sixth step is to refine and level, and the putty layer is not thick; Step 7: Brush up: one bottom and two sides.

Therefore, before decorating, consumers must first understand the situation, determine whether it is worth decorating, make a long-term plan, and confirm their decoration. review the actual needs; To determine the necessity of decoration, you must see the changes in the room, in addition to the hardware problems that can be seen outside on the spot, such as the selection of patterns and other details are presented, it is best to list them according to the requirements of the actual population, age, gender, preferences, etc., so as to facilitate communication with the designer in the future to achieve the most comfortable living experience. Preparations; Decoration must have a certain concept, in order to grasp the process and rhythm of the project, so the preparatory work must not be less.

You should clean the wall first, then smooth it with sandpaper, apply some primer, and then apply some paint you want. You can also paste curtains or wallpapers, tiles or latex paint.

You can repaint, or paste the wall covering, understand the layout of the renovation, do a good job of scraping putty, choose good materials, pay attention to the skills of renovating the wall, and prepare the corresponding tools.

It can be redecorated, or the wall can be tidied up, or wallpaper, or professional personnel can be decorated, and putty can be scraped again, or repainted.

Maybe repaint, or paste the wall covering, solve the installation of the renovation, do the task of scraping putty, decide the information, pay attention to the renovation of the wall, and prepare the corresponding object.

For the renovation of old walls, you can ask a professional construction team to repaint putty and latex paint, and if there is a problem with waterproofing, you can use products with waterproofing systems.

You can re-brush the paint, a dark color, which will make the home have a different feeling, and you can also paste some wallpaper on the wall, wallpaper is also a very good choice, not only to cover the shortcomings, but also to make the home more beautiful and generous, and the cost is relatively low.

First of all, scrape off the upturned wall skin on the old wall skin, and then spray a small amount of water, and start to repaint after it dries, which is both convenient and cost-saving.

Choose some tiles with better materials for renovation, and be sure to pay attention to the durability of skills and materials, and at the same time carry out reasonable design to ensure the overall structure.

The renovation of the old wall is also possible, especially the purchase of second-hand housing users will generally redecorate their homes, there are many ways to turn over the old wall, the most trouble-free method should be to clean up the wall first, and then repaint a layer of white paint on it, and the vast majority of users will operate this method of painting by themselves, so there is no need to ask the construction master to come to help, and the cost will be reduced a lot.

Of course, you can also put wallpaper on the wall, which will be more beautiful after laying wallpaper.

It is best to find an angle grinder and install a grinding disc, polish off the old wall skin from before, and then you can brush the putty.

First of all, the surface must be sanded well, then the color of the renovated wall should be thought of, and finally the material should be selected, and the material can be mixed to paint the wall directly. You can't move in directly, you have to wait for 3 months for the toxic gas to dissipate.

First, the old walls need to be shoveled, the external lime or cement needs to be removed, and then the new lime is smeared, and then the sanding and painting is carried out.

Step 1: Treatment of old walls before renovation Before the renovation of old walls, we need to remove the putty layer and latex paint painted on the original walls. Step 2:

Wall cleaning Before renovation, the wall base treatment is also required, and the severely painted places need to be completely eradicated and then plastered with white cement.

The walls of our house would get dirtier and dirtier after living in it for a while. Since walls change over time, homes in better condition often update their walls. So, I'll talk about itHow to renovate the old wall of the homeSome questions about it.

1. Disassemble and clean. If it is placed behind the floor tiles, then it may cause damage, and when you are laying the floor tiles, it is very annoying to clean. If you're going to lay floors, it's better to wait until you've tiled the walls.

2. Lay tiles.

Tile placement must be done after the completion of the plumbing** and must be done after approval. Generally speaking, the wall tiles of the bathroom, kitchen or balcony can be paved only after they are paved, if you are laying the floor tiles first, then you may cause damage when laying the wall tiles, and it is very troublesome to clean it. If you are laying floors, it is most correct to wait until the walls are all painted.

3. Wall treatment.

After laying the tiles, the next step is to deal with the bedroom walls, rooms and dining rooms, which also include leveling, crack repair, scraping putty, etc. Finally, brush with latex paint. At this point, cabinets and tops can also be measured.

It can be said that the size of the cabinet measured at this time is the most accurate, and custom cabinetry can be installed.

4. Installation. How to renovate an old wall, when you are done painting the wall, you can install the interior door at this time.

1. First of all, the treatment of the old wall must be professional, but the professional non-professional wall renovation treatment will directly affect the subsequent performance and maintenance time. So inspect before renovation, however, look at the wall to detect in different situations after construction, again to eliminate all or just deal with some cracks.

2. Next, health always comes first, but no matter how decorated, health always comes first. The reason why we choose coatings, the first thing to consider is a good product that protects the environment. You must choose products that meet the standards, especially the VOC content in the quality inspection report.

The above isHow to renovate the old wall of the homeSome introductions are shared with you.

You can get it for free

1.Before the renovation of the old wall, the putty layer and latex paint on the original wall were removed.

2.Primer is painted, and the primer is used to seal the substrate, resist alkali and moisture, and protect the topcoat.

3.Add an appropriate amount of putty powder to the water, stir it, and then put putty on the wall.

4.Polishing the putty layer is to be sanded by hand little by little with sandpaper.

5.Paint the walls twice.

6.According to the description of the paint ratio, brushing, estimate the amount of renovation in advance.

Scraping old walls; sanding old walls with sandpaper; Brush the first pass of pulp; Brush the second pass of pulp; Finally, paint the walls. With these five steps, it's time to renovate your old wall.

It makes sense to clean the wall first, then remove dust and powder, repair the wall, and then paint it.

The easiest way to renovate an old wall includes the following steps:

1.Clean the surface: Start by cleaning the wall from dust, oil stains, rotten coatings, etc., which can be cleaned with detergent and water scrubbing or high-pressure water gun.

2.Flattening the wall: Use materials such as gypsum board or filler to level the hidden surface of the wall to fill the cracks, bubbles, hollows and other parts of the wall.

3.Polishing the wall: Use a sander or hand tool to polish the wall to make it smooth.

4.Decorative surface: choose the appropriate wall decoration method, including painting, pure congratulatory paper on the wall, decorative gypsum board, etc.

It is important to note that these simple methods can only deal with some superficial problems. If the wall has serious damage, water leakage, etc., it needs to be completely repaired.

The renovation of an old wall can be done using the following simplest methods:

1.Clean the wall: First, clean the wall thoroughly to remove dust, stains, and oil stains. Walls can be cleaned with a damp cloth or a mild detergent.

2.Patch up the wall: Check the wall for uneven or broken parts, if necessary, fill the depressions and cracks with putty or repair chain patch, and use sandpaper to smooth out.

3.Paint latex paint: Choose the right latex paint color and apply the latex paint evenly to the wall with a brush or roller. Depending on the need, multiple layers can be applied, waiting for drying between each layer.

4.Add decorations: If you're looking to add some décor to your walls, consider using decorative materials like wallpaper, murals, stickers, and more. Choose the appropriate decoration material according to your personal preference and paste it according to the instructions.

5.Update wall finishes: If you're looking to change the wall finish, consider using drywall, wall tiles, decorative panels, etc. These materials can be applied to old walls to create new decorative effects.

6.Add hanging decorations: In order to increase the decorative effect of the wall, you can choose suitable hanging decorations, such as picture frames, decorative paintings, wall stickers, etc., and hang them on the wall.

These methods can simply renovate old walls and give them a new lease of life. However, if there is serious damage or quality problems with the surplus of the old wall, it is recommended to consult a professional decoration worker for treatment.

The main ways to renovate an old wall are:

1.Stucco: The traditional method of painting. Wash the wall with neutral soapy water first, remove grease and heavy color of the wall, and paint it two or three times.

2.Latex brushing cement: first clean the wall of the bucket, and then brush the wall with latex cement. After the cement brush layer, it can play the role of bonding and sealing, which is more convenient.

3.Brick installation: For the old wall with serious peeling, the wall can be directly removed and re-bricked. But the cost is relatively high.

4.Use a floor brush to brush plaster: Use a floor brush to quickly brush the cement ash, and then dry it to achieve a good bonding and sealing effect. However, it is easy to produce color difference.

5.Brush waterproof plasticizer: Brush waterproof plasticizer directly on the wall. It can moisturize old walls, and at the same time act as anti-penetration and dust-resistant, and can also extend the service life of the wall.

6.Brush microfiber wall paint: After brushing microfiber wall paint, it can cover the color and texture of the old wall with a wide and wide blue bottom, so that the rough wall surface becomes smooth and smooth. Choose different shades of wall paint according to different effects.

All of the above methods are relatively simple and practical solutions for renovating old walls. When choosing a plan, you need to combine the actual situation of the wall to measure the budget and effect.

The easiest way to renovate old walls

Method 1: Base treatment of the wall.

In ordinary old houses, when we are doing wall treatment, we can remove the paint on the original wall, and then wet the surface of the wall through water, and then demolish it.

After dismantling, it is enough to apply latex paint in the middle of the painting, and if you want to be more economical, we can choose to buy affordable latex paint online.

Method 2: Paint the wall with latex paint.

This is a very simple method in wall renovation, generally speaking, after the wall is treated, then a putty leveling, and then a sanding treatment, and then painted with your favorite color of latex paint.

Note: After the latex paint is brushed, you must enter the store and ventilate the shop before moving in, so as not to affect your health.

Method 3: Paste wallpaper.

This method is also very simple, after buying wallpaper online, after a simple surface treatment on the wall, the wall treatment is smooth and clean, and you can paste the wallpaper.

There are many types and colors of online wallpaper, you can buy according to your favorite hail, the construction of wallpaper is also very simple, and the key to sticking wallpaper is to deal with the problem of elasticity.

1. Clean the wall: Before the wall is renovated, the wall should be treated as a base layer, and if there is a serious chalking of the wall, all the walls should be removed, and then a layer of white cement should be smeared. In addition, the old wall has been treated with paint potato residue and the wall is too smooth, so that the skin that is not firmly bonded must be removed first, so that it is more convenient for the new car coatings to better bond with the wall.

2. Paint primer: The wall must be painted with primer, which has the effect of sealing the substrate, which can not only resist alkali and moisture, but also protect the topcoat. If you paint directly without priming, the wall will be used for a long time, bubbles and mold will appear, and it will change color after being exposed to the sun for a long time.

3. Large-area repair: If it is a good topcoat, it is difficult to repair, and it is easy to produce color difference, and the quality of the wall will be affected because of different materials. Therefore, it is best to repair a large area when repairing, so as to prevent the occurrence of color difference.

4. Anti-color difference: When proportioning paint, it is best to match it according to the ratio instructions of the paint, and the dosage should also be calculated. It is best to prepare a sufficient amount at one time, so that there will be no color difference in the ratio due to insufficient paint, and the wall will be more beautiful.