Tile walls are generally checked once every few years?

Generally, it is checked once 24 hours to 48 hours after the tile is pasted, and if there is a problem, it will be dealt with in time. Then a safety check is carried out every 3 years.

There is no provision for a few years to inspect the tile wall hollow drum, which depends on the quality of the construction and the quality of the tiles when pasting, if the quality is guaranteed, there will be no hollow drum problem after the completion of the general completion, if there is a problem with the quality of the process or material, it is not excluded that the hollowing occurs in the process of use, there is a short time of 1 to 2 years, and a long time of 3 to 4 years.

Three years of tile wall hollow drum, if the wall is damp will gradually increase, with the hand to knock will know the position of the hollow drum, a long time will fall off, this is the quality of the tile mosaic, you have to remove and restick the tile.

Tile walls are generally inspected once every two years to see if there is any bulging, cracks and other non-standard phenomena. If it appears, it should be repaired and replaced in time.

First, the reason for the formation of tile hollowing:

1. The construction does not meet the standards.

The plastering of the base layer of the wall is not disposed of as required or the garbage of the base layer is not cleaned up.

2. The tiles are not soaked in water or not soaked enough.

Tiles, especially glazed tiles, are not soaked in water or soaked enough before they are laid. It should be soaked in water for more than 2 hours, so that the tiles can fully absorb water, and then take out the shade to dry or wipe the clear water.

3. The paving mortar is not full.

In order to save cement mortar, or to save time, the mortar is not full or the tiles are not gently knocked and squeezed compactly.

Second, the tile hollow drum treatment method:

1. First take out the hollow drum tile, and then clean up the base layer and the back of the tile, it is recommended to use fast and good anti-mildew super sealing structural adhesive or use fast and good strong liquid nail 300ml to hit the back of the tile, and use multi-point distribution as well. Finally, level with a rubber hammer.

2. Construction method:

Base surface treatment: Remove oil, dust and loose objects from the work surface, clean tile crevices, and ensure that there is no debris and water accumulation.

Stirring: Pour the dry powder into a container containing 27%-29% water in a certain proportion, stir at low speed with an electric mixer, stir while pouring the powder until the thick slurry (like paste) with no granulation and precipitation is uniform and free of granulation and precipitation, and then stir for 1-2 minutes before use.

3. Caulking: Use a professional caulking tool to completely press the caulking material into the gap diagonally, and pay attention not to leave it blank. After 10 minutes, wipe off the caulk from the tile surface with a damp sponge or cloth.

4. Cleaning: After the caulking material is dry, use a wrung out wet sponge to clean the surface of the tile. Try to avoid strong direct sunlight for 3 days after construction, and it is recommended to sprinkle and maintain the construction of the caulking material every day for a week.

Tile hollow drum is a big taboo in decoration, wall tile hollow drum illustrates that the tiling is unqualified, found that the hollow drum problem should be dealt with in a timely manner, it may hit people, causing greater losses in the later stage, if it is just a hollow drum does not need to be too nervous, just treat it with a normal heart.

If you don't have an empty drum when you paste it, it won't be empty when you post it, so you don't need to check it again.

If there is a hollow drum, the tile can be checked out after it is pasted and dry, and the sound of the hollow drum and the solid is different for each tile knocked.

Tile walls are generally checked once every few years? Tile walls should be inspected every year at the beginning of spring.

Summary. Hello kiss is honored to answer for you: tiles may live for 10 to 12 years will appear hollow, but it is not absolute, mainly to see the tile, whether there is a gap when pasting, but also to see the quality of the tile.

The amount of some floor tiles is still very good, and there will be no hollowing phenomenon after pasting for more than ten years, and the service life is still relatively long, but there are some inferior floor tiles that are still prone to hollowing phenomenon, and after the hollowing phenomenon is still prone to tile cracking, a large area of hollow drum still needs to be re-pasted with tiles, and the original floor tiles must be removed first.

Hello kiss is honored to answer for you: ceramic tiles may live for 10 years to 12 years will appear hollow phenomenon, but it is not absolute, the main thing is to look at the first look at the tile, whether there is a gap when pasting, but also to see the quality of the tile. The amount of some floor tiles is still very good, and there will be no hollowing after more than ten years, and the service life is still relatively long, but there are some inferior floor tiles that are still prone to hollowing, and after the hollowing phenomenon, it is still easy to crack the tile, and the large area of hollow drum still needs to be re-pasted with tiles, and the original floor tiles must be removed first.

Related information: After the tile is used for a period of time, it is inevitable that there will be a hollow drum, but when laying the floor tiles, if there is a certain gap between each floor tile, and the tiles selected are also good quality floor tiles, then the possibility of hollowing is relatively small. Basically, it will take about 10 to 20 years to Zheng Bu time, there will be a hollow drum phenomenon, and the quality of some brands of ceramic tiles is relatively good, so the possibility of problems is relatively small, and there will be no hollowing or cracking under normal circumstances.

Is it normal to have a slight hollowing in the bathroom.

The bathroom is a little slight.

Hello kiss normal, because the bathroom floor often has moisture, a slight hollow drum is nothing normal <>

Hello dear: bathroom wall tile hollow drum treatment method If there is a hollow drum in the brick wall, you can first take out Shenshan argue, mix some cement with mortar evenly and apply a thin layer on the back of the tile, and at the same time put it on the surrounding place, and then press it on the wall and wait for a few hours.

**Is it useful to buy an empty drum squeeze.

The bathroom is almost 10 years old and has a slight hollowing.

The bathroom has been around for almost 10 years, and it's normal to have a slight hollowness.

A slight point, the bathroom, posted for almost 10 years.

Hello Qinqin is honored to answer for you: **There is a short drum pouring glue** about 7-30 yuan, very easy to use <>

Generally, the position of the hollow drum is more in the upper half and four corners of the wall tiles, and the position of the yin corner paving.

The five-point percussion detection method can be used:

Hit the corners and center of the tile with a metal rod to determine whether the tile is hollow by the sound it makes.

If the percussion sound is dull, it means that the paving is more solid and firmer. On the contrary, it makes a crisp sound of "dong dong".

It indicates that there is no firm paving, and there is a hollow drum.

We suggest: it is not recommended that the wall tiles have a little hollow drum to be removed and repasted, within a reasonable range, do not waste money and money, but if you find a large area of hollow drums, you must pick it off and repaste.

Long strips of metal, such as small hammers, stainless steel chopsticks, etc.

Tap it gently, like picking a watermelon.

After 2-3 years of use, the tiles will appear hollow.

The hollowing of the tile is caused by the poor bonding between the brick and the ground or the poor quality of the pure hidden brick itself. The timing and cause of hollowing in tiles varies, and it usually takes a while for them to become apparent. Under normal circumstances, it takes 2-3 years after the installation of high-quality tiles to have the problem of hollowing.

If low-quality tiles are used or the installation is irregular, hollowing may appear in a shorter period of time.

Why are the wall tiles hollowing out after a few months:

1. The base layer is not cleaned during construction, which affects the adhesion of the adhesive material, so there is a hollowing phenomenon after a few months;

2. Before construction, the tiles were not fully soaked, which absorbed the moisture in the cement mortar in the hall, reduced the viscosity of the cement mortar, and led to the hollowing phenomenon after a few months;

3. Because of the influence of the season, the wall tiles will be in a humid or dry environment for a long time, and there will be hollowing after a few months. <>

Hollowing of wall tiles is also a common problem, which not only endangers the safety of the family, but also affects the aesthetics. At this time, as owners, we want to understand the harm and then decide how to deal with it. In this way, we can ensure the safety of our family.

Is it? I hope that after reading it, I can understand it clearly.

First, is the hollowing of wall tiles harmful?

1. Wall tile hollowing is very harmful, we need to understand it, and the wall decoration is also very harmful to tile hollowing. It will be particularly unsafe. Due to the uneven force of the tile adhesive layer, the coefficient of expansion is inconsistent, resulting in the cracking of the tile surface layer.

It is a common phenomenon that tiles are hollow and the surface is prone to cracking;

2. The hollow drum must be a tile and an adhesive layer (such as cement river sand), or a large gap between the adhesive layer and the original base of the wall, if such a gap occurs in the water-intensive area of the kitchen and bathroom, it is easy to lead to the accumulation of water in the gap, especially the floor tiles. Standing water inevitably becomes smelly and odorous, which is also harmful to health;

3. The position of the hollow drum cannot withstand heavy pressure and heavy blows due to poor suspension, otherwise, it is easy to crush and break. This is also the reason why you can't drill the position of the hollow drum. If it is drilled, it will be broken.

4. The tile has more hollow drums, which means that this tile is like dangerous goods, after a long time, it is possible to gradually expand the void area from the hollow drum, which will eventually lead to lifting, falling off, and once the high wall tiles fall, it is easy to have a safety accident.

Second, how to construct the decoration of wall tiles.

1. Before we lay the wall tiles, we need to do it at the base level. The substrate is first cleaned to remove dust and stains from the surface, and then the putty and paint layers are removed from the surface. At the same time, the flatness of the base layer should be checked.

If the base is uneven, it needs to be leveled with cement mortar, otherwise it will affect the laying effect of wall tiles.

2. After cleaning the base layer, it is impossible to lay wall tiles directly. Instead, start by popping up a few elevation control lines around the wall with ink lines, and then pop up the reticles on the ground to control the size of each floor tile. Then, the tiles are pre-laid according to the requirements of the decoration, and the effect of the decoration is checked and adjusted.

3. Modulate the wall tile adhesive, add an appropriate amount of water to the adhesive slurry, mix them evenly and stir, then let stand for 5 minutes to 10 minutes, and then stir for 1-2 minutes.

4. After cleaning the surface of the brick wall and preparing the adhesive, you can start to prepare the paving wall tiles. Before laying, dust and dirt on the surface of the wall tile product should be cleaned. After processing cleaning, the pre-configured slurry can be applied to the back of the tile, paying attention to the uniformity and fullness of the application when applying the slurry.

5. Caulking treatment, after 24 hours of laying the wall tiles, the prepared caulk or beautiful cement He Chong grout can be applied to the gap between the bricks and the bricks to prolong its service life and increase the overall beauty of the interior decoration. After completing the caulking, clean the excess caulk with a damp cloth to keep the surface of the wall tiles clean.

Kiss, the reason for the large-scale hollowing of the wall tiles after one year is 1, the wall is uneven: the wall is uneven, and the tiles and the wall are not saturated because of the contact, resulting in the appearance of hollow drums, and even falling off; 2. Improper ratio of auxiliary materials: the ratio of cement to sand is not well controlled, and the mixing is uneven, which affects the sticking effect; 3. The size of the reserved gap is not enough

When laying bricks, there should be enough gaps between the bricks, otherwise the porcelain bricks will arch due to extrusion. What is the impact of tile hollowing 1, causing tile cracking: the tile on the hollow drum has been not forced, and it is easy to cause the tile to crack under the condition of increasing external force.

2. Affect the sanitary environment: the hollow drum will also cause water accumulation in the wall and ground, and stink and emit peculiar smells, thus affecting their own living environment. 3. Cause warping or falling off

In the near future, ceramic tiles will slowly expand the scope of hollowing, and even cause tiles to bulge, fall off and other phenomena. 4. Difficulty in drilling on the wall: In most cases, it is necessary to drill holes in the tile wall to install cabinet nuclear sliders, household appliances, etc., if the tile produces hollow drums, the drilling process is relatively difficult, and it is very easy to break the tiles.

The treatment method of different hollow drum types is situation 1: corner hollow drum treatment method: grouting to fill the void if the hollow drum is located at the edge of the brick body, the solution of pouring cement slurry can be used, this method saves time and effort, and is not easy to cause damage to the brick body.

Situation 2: Hollow drum treatment method in the middle of the tile: pry brick repaving If the hollow drum part is in the center of the tile, the corner of the hollow drum is still hollow after the grouting is still in the old guess situation, you need to pry the tile out and repavement.

The hollowing of the wall tiles, this we should have encountered, sometimes regardless of whether it is considered serious, the problem will be more serious after not repairing well, which will cause a large area of the wall to fall off. So how harmful is the hollowing of wall tiles? Let's get to know each otherHollowing of wall tiles is harmfuland how to deal with the hollow drum of wall tiles.

First, the wall tile hollowing is much more harmful.

1. The harm of hollowing the wall tiles, the wall tiles are not treated in a timely manner, which may have a "joint effect", which is easy to cause the surrounding tiles to gradually become hollow, and finally all the tiles are warped or fall off.

2. The harm of wall tile hollowing, and the hollowing of wall tiles better illustrates the inadequacy of the construction process in the early stage of decoration. will cause a serious safety impact on life later.

3. The surface tile hollowing will cause the items in the tile wall structure to fall easily, such as the towel rack installed on the wall, the installed water heater and other items, which will be affected to a certain extent.

4. The harm of wall tile hollowing, after the tile is hollow, this part of the tile can not be supported by the force, and it will be easy to crack and other wall conditions in later life.

5. The harm of wall tile hollowing, if the hollowing of wall tiles is more serious, it will be particularly easy to cause indoor walls and ground to produce water accumulation after a long time, which is also the main reason for some serious environmental odors.

Second, how to deal with the hollow drum of wall tiles.

1. How to deal with the hollowing of the wall tiles, if there is a small amount of local hollowing of the tiles on the wall and floor, for example, if it will not affect the cabinets, mirror cabinets, showers and hot water and other furniture and household appliances installed steadily, we can not deal with it, but if it has a serious impact on the installation and our daily life, it is best to knock off the local tiles and re-pave the best.

2. How to deal with the corner hollow drum of the wall tile, if you find that the edge of the tile has a hollow drum problem, you can water the part of the edge of the hollow drum (the gap between the tiles can be smashed with a small shovel, and then the cement is poured into the gap, so that the hollow drum place will be automatically sucked in until it is filled and solidified), which can prevent the whole from being replaced.

3. How to deal with the hollow drum of the wall tile 2 3 area hollow drum, if it is a large area of the wall hollow drum situation, it is necessary to remove the tile and re-pave, it is best to make the adhesive this point particularly important when paving, if the selected tile area is small, you can use the special glue for ceramic tiles, because the special rubber book for ceramic tiles will be more adhesive than cement; A single tile is pasted on a flat plane, you can use tile adhesive tile adhesive, if there are many tiles in a small area, it is better to use special adhesive for ceramic tiles than to use cement.

About the wall tile hollow drum harm and how to deal with the wall tile hollow drum content is introduced here, Yundong stainless steel products are more safe and environmentally friendly to use, I hope to be able to choose the right kitchen utensils at home.