How much does it cost to clean a well?

It's normal, if you clean a well, it's about 500 yuan, because he has to drain the water, and then rinse and drain the sludge inside, which basically takes a worker a whole day's work, so it takes about 500 yuan.

This specific need depends on the depth of the well, and under normal circumstances, it costs about four or five hundred yuan to wash the well.

Most of them are per square meter, twenty dollars. The water tank is too small and may be more expensive Calculated by the cube, the size of the area is different, and the price is not the same.

Under normal circumstances, the well should be washed at least once a quarter, and at the same time, according to the results of underground sampling and testing, the water quality change law in the water injection well is analyzed, and the well washing cycle is determined. Wells, engineering structures mainly used to extract groundwater. It can be vertical, oblique, and a combination of different directions.

However, it is generally vertical. It can be used for domestic water, irrigation, and can also be used to hide or store some things.

In case of the following special circumstances, the well should be washed in time to ensure the quality of the injected water:

1. Stop injecting for more than 24 hours, and then inject water after washing the well.

2. If you need to change the water injection method, you must change the water injection method after washing the well.

3. When the water injection well has a blowout or backflow, it is necessary to wash the well and then inject water.

4. If the water source is changed, if the water of the two water sources before and after is different, the water type is different, it can not be mixed, and the water can only be injected after washing the well and thoroughly flushing the water storage equipment and process manifold.

5. After the downhole operation is carried out on the water injection well, the well must be washed and then injected with water.

Water wells are of great significance to the development of human civilization. Before the advent of wells, humans lived by water and could only live where there was surface water or springs. The invention of the well expanded the range of human activities.

The water well of the ancient cultural site of Yuyao River in Yuyao, Zhejiang, is about 5,700 years ago. It is a fairly elaborate square wooden well, with a depth of one meter and a side length of 2 meters. It can be inferred from this that the appearance of the primitive form of the well was much earlier.

Summary. Hello dear. Judging by the current situation. It takes at least 1,000 to 2,000 yuan to drill a well. Basically, it's the cost of drilling a well, and then adding the rest is the cost of buying a pipe.

Hello dear, hall. Judging by the current situation. To drill a well, you need to pretend to be at least more than 1,000 to 2,000 yuan per mu. Basically, it's the cost of drilling a well, and then adding the rest is the cost of buying a pipe.

Including excavation, soil transportation, bottom filter layer treatment, bricklaying, cement enclosure, manhole cover and other processes. Only digging a well for 400 yuan is enough. Attention should be paid to drilling wells:

1. The quality of the water source, there are no disturbing and disturbing the surrounding areas, there are toilets and other pollution sources 2. The water source is abundant and the water level is low. 3. The soil layer is soft and easy to excavate! The speed of drilling wells and finding water instruments ranges from thousands to tens of thousands of yuan, the more accurate the more expensive, and the deeper and higher the measurable depth.

Take the water finder that can measure the maximum depth of 300 meters as an example, ** in about five or six thousand, if there are high requirements for accuracy, the instrument that needs to be purchased needs to be tens of thousands. Therefore, the purchase of wells and water finders should be determined according to their actual application, so as to avoid the situation of "small material for big use" and "big material for small use".

Dear, hello, I am glad to answer for you the need to drill a well 1000 yuan is the money for drilling a well + under the plastic pipe (one inch), the depth of the well is about 58 meters, more than 50 meters according to a meter 15 yuan calculation self-priming pump and other materials to buy their own popular inch wells, about an inch thick drill pipe directly into the ground, and then the one inch thick plastic pipe directly down to the end, which is also a late liquidation is a deep water well The price of a well is different in different regions, different geological conditions, and the size of the well is not the same. If we have 60 wells of average depth, I heard that there are 30 wells, and they are all the kind of wells that are inserted into a pipe underground to a certain depth and then have a piston lever on it. If it is the kind with a larger mouth, I estimate that it will be a labor cost, and no one wants to fight, which is more dangerous.

The ** of deep wells is generally about 10,000 to 20,000, depending on the depth. For irrigation and water supply over large areas, the questioner is indeed a layman! Since the person publicly replied on the Internet, how can he deceive?

It's just that ** doesn't suit your heart. In addition, I have drilled a pre-seepage well, a soil water well of about 100 meters, 300 yuan per meter is possible, and a 500-meter deep well, 300 yuan will not be done for you.

Summary. Kiss <>

Hello, I have given you the answer here for your reference <>

Kiss <>

Basically, it is about 2,000 yuan to 3,000 yuan, and a small well 20 meters deep is drilled, because it is shallow, and the well drillers are calculated according to how much it costs to drill a well, not how much it is to drill a meter deep.

How much does it cost to hit a well.

Kiss <>

Hello, I have given you the answer here for your reference <>

Kiss [fresh ruler preparation of clear flowers], basically 2000 yuan - 3000 yuan left and right, a 20-meter-deep small well, because it is shallow, the masters of the well are according to how much money is played, so to calculate, not according to how much money is a meter deep.

It basically takes about 1-2 hours to drill a well. Including drilling, combing down the tube, loading water pumps, etc. However, depending on the region and geology, the time required to drill a well and the time required to drill a well are different.

Deep-water wells above 20 meters need to drill through the rock layer, ** in tens of thousands of yuan. A small hand-held machine, ** is not expensive. A set of about 2-3 thousand can drill a small well 20 meters deep.

Washing wells is about 200 to 500 yuan.

The standard of deep-water well washing is that the depth of the well is 230 yuan at 200 meters, the depth of the well is 300 meters, and the depth of the well is 500 meters, and the price is 500 yuan, because he must drain the water, and then flush and drain the silt inside, which basically requires a worker to work all day.

Well washing refers to the process of injecting the well washing medium from the pumping equipment through the wellbore or drill pipe to carry the substances (liquid phase, solid phase, gas phase) in the wellbore to the surface due to engineering needs, so as to change the properties of the medium in the wellbore to meet the operation requirements.

Methods of well washing:

The original drilling leakage well pump is pumped into the clean water, that is, after the clear water is replaced, the well is continuously cycled, which is called the clear water well; Stop the circulation of clean water, use the piston to continuously lift up and down in the well pipe, cause pressure excitement, destroy the mud skin of the well wall, and dredge the pores of the aquifer at the same time, which is called piston washing; Piston washing the well and returning to grandchildren needs to be carried out alternately and repeatedly.

Before the pumping test, a centrifugal pump or compressed air machine is used to pump groundwater to achieve clear water and stable effluent, and then the pumping test is carried out, which is called pump suction well washing and compressed air washing well; In addition, there are wells washed with carbon dioxide and pickled. <>

Do you mean rural wells?

There is no set rule for this, it depends on the depth of your well water and the surrounding environmental conditions and air pollution. The environment is good, the well water is deep, and the surrounding air is ***, so there is no need to wash it at all. On the contrary, it is necessary to wash frequently, which is possible for one or two months, half a year and a year.

Pro, hello, I am very happy to answer for you: how much does it cost to hit a well, pro: about 100 meters of soil wells, 300 yuan per meter to drill a well price in different regions, different geological conditions, the size of the well Shenshen Mountain is not the same.

If we have 60 wells of average depth, I heard that there are 30 wells, and they are all the kind of pressure wells that are inserted into a pipe underground to a certain depth and then have a piston lever on it. If it's the kind of mouth that is relatively large, I estimate that it will be a labor cost, and no one wants to fight while swimming, which is more dangerous. The ** of deep wells is generally about 10,000 to 20,000, depending on the depth.

Hello, one way is for people to go down to clean but this is more dangerous, the air is scarce underneath, the oxygen is insufficient, people are easy to fall into a coma, and they need to have a hair dryer to blow the wind constantly.

Diesel engine pumping machine with thick pipe along with water and sand is suitable for wells with relatively little water.

Hope it helps.