What is the process of making an origami airplane, the process of an origami airplane

Different people have different requirements for the production of paper airplanes, some people like to fly high and fly far, some people will like paper airplanes with cool shapes, and the production of origami airplanes can also meet both conditions, that is, the most popular paper airplanes, but the production of this origami airplane will often be more complicated, here we will make an origami fighter jet.

Steps: Step 1:

To prepare for making an origami airplane, you use square pieces of paper.

Step 2: Turn the paper to the back, then fold it back in half, open it, fold it in half and open it again.

Step 3: Fold each of the four sides to the middle position and open it.

Step 4: Fold the diagonal diagonally in half and open it.

Step 5: Rotate the creaseed paper below, then fold the left corner to the center point.

Step 6: Next, follow the creases in the tutorial, the red ones are the valley marks, and the blue ones are the mountain marks, and fold them.

Step 7: Once the folding is complete, fold it in half.

Step 8: Fold the upper layer down a little distance from the bottom fold.

Step 9: Then fold the lower layer back in the same position.

Step 10: Once this is folded, stand up the origami airplane and look down from above.

Step 11: Place the wings on both sides.

Step 12: That's it.

Step 13: At this point, the cool origami airplane is ready.

Hello. You can use a piece of paper, fold it in half a few times, and you can fold the plane.

The tutorial for this airplane is very simple, Siri a square, just fold it in half, and then fold it diagonally.

1. First of all, prepare a rectangular piece of origami. This is shown in the figure below.

2. Fold in half along the middle, and the crease falls on the long side of the rectangle. This is shown in the figure below.

3. Fold the top two corners towards the center line. This is shown in the figure below.

4. Turn the folded figure in reverse and fold the angle of the triangle upwards partially.

5. Then turn it around and fold the left and right sides in half to the middle.

6. Now fold it in half left and right.

7. Fold the hypotenuse to the vertical side, and the reverse side is also the opposite.

8. Under the final adjustment, the aircraft is ready. This is shown in the figure below.

Preparation materials: one sheet of A4 paper.

Step 1: First, fold the prepared A4 paper in half along the center line, as shown in the figure below.

Step 2: Then fold one corner, and the other corner is also folded up, as shown in the figure below.

Step 3: Then continue to fold the two corners inward, as shown in the figure below.

Step 4: Then proceed to fold the corners backwards to the edges as shown in the image below.

Step 5: Then continue to fold out the two small corners, and then open them again, as shown in the figure below.

Step 6, and then turn the folded triangle up, as the agility of the aircraft and the hole, as shown in the figure below.

Step 7, finally fold in half again, fold out the wings, and fold the plane here, as shown in the figure below.

Aircraft refers to a heavier-than-air aircraft that has one or more engines to generate forward thrust or pull, and lift is generated by the fixed wings of the fuselage, and flies in the atmosphere in a heavier-than-air aircraft.

The handmade process of folding an airplane is as follows:

Material preparation: a rectangular piece of paper.

The operation is as follows:

1. Take a rectangular piece of paper, fold the rectangular paper in half along one of the middle lines, so that the two long sides coincide, press out the crease in the middle, and then open it.

2. Fold the two right angles on one width of the rectangle to the same side respectively, so that the two right angles become a right-angled side.

3. Fold the folded right angle to the right so that the vertex of the folded right angle is on the middle crease.

4. Fold the two right angles on one side to the same side respectively, make the two right angles into a right-angled side, and fold the small corner below the imaginary code upward.

5. Fold along the crease in the middle so that the two sides of the crease are completely overlapped. A handmade airplane is folded!

The method of folding an airplane is as follows:

Fold the 21x15 cm piece of origami in half along the long side, fold the two corners in half towards the midline to form a triangle, and fold it 2 more times; Fold the ends outward, then fold them in half along the midline, and fold the middle part upwards; Open the middle part of the cave and press it down, fold it flat, and fold the two ends upward.

Paper airplanes

A paper airplane (scientific name: autonomously powered aerodynamic physical model) is a toy airplane made of paper. As long as it is a paper airplane, it can be called a paper airplane.

Origami airplane It is the most common form of origami handicraft in aviation, which belongs to a branch of origami handicraft and also belongs to a type of paper airplane. Since it is one of the easiest types of origami to master, it is loved by beginners and even experts.

Development of Shna Fiber

Making toys out of paper is thought to have originated in China 2,000 years ago, when kites were a popular pastime. But it's not the same compared to paper airplanes. The earliest paper airplanes dating back to the past were made in the West in 1909.

However, the most accepted method of production today was made by John K. Northrop (one of the founders of Lockheed) in 1930. Northrop used paper airplanes to do simulation tests to discover the flight mechanism of real airplanes.

Common origami airplanes

"Falcon" paper airplanes

This paper airplane is made in only 6 steps. You can use a rectangular piece of paper, such as A4 paper: 21cm, four-sheet paper: positive 389mm 546mm, magnificence 444mm 597mm, etc., to make this paper airplane.

"DC-03" paper airplane

There are already many people who claim to have made "the best paper airplane in the world". Model DC-03 is one of them (DC-03 paper airplane model). The DC-03 has a huge glider and a tail that is probably unique among all paper airplanes.

Unfortunately, there is no international paper airplane federation or association that makes an official determination as to whether or not this is the best aircraft in the world. The air time can reach 128 seconds.

Here's how to fold an airplane:Material preparation: A4 paper, etc.

1. Fold in half.

2. Fold the top corner to the center line.

3. Fold the top corner downward.

4. Fold the top corner towards the center line.

5. Fold the corners upwards and fix the corners on both sides of the center line in early training.

6. Fold outward along the center line.

7. Fold the wings down to be flush with the belly.

The folding process of an origami airplane is as follows:Tool punch contains Material: colored paper.

1. Fold the colored paper in half along the short side to the middle.

2. After that, the two corners of the short side are folded to the middle.

3. Continue to fold the two sides to the middle.

4. Fold in half along the center.

5. Fold the wings, fold the two sides to the center, the two sides of the wing are aligned with the center, and a paper airplane that flies far and scatters the smile is completed!

The folding process of folding a paper airplane is as follows:

1. Prepare a square sheet of paper first, fold the paper symmetrically and divide it into four equal parts.

2. Fold the rectangle in half in half in the same way.

3. Then open the folded parts on both sides and fold the triangle, and fold the two sides into two long trapezoids in turn.

4. Select one side of the trapezoidal corner to fold the bevel angle, and then stare at the silver to turn over, and the other half is also folded, pay attention to the symmetry on both sides.

5. Then fold symmetrically as a whole, with the bevel angle inside, and select one end of the bevel angle to fold the triangle inward.

6. Fold two triangles along the fold from the inside to the top, and the tail of the paper airplane will come out.

7. Finally, fold the wings according to the structure of the bottom of the aircraft, open the head to fold the bevel, fold out the pointed end of the aircraft, and fold the shape of the two creased wings in the back.

Origami skills: 1. Centripetal fold of the four corners. Fold the square paper into two diagonal shapes to find the center point, and then fold the four corners towards the center point.

2. Double square fold. With repentance and square paper, fold it in front of the side first, and then fold it backward while facing forward according to the middle line, stretching it out from the middle and flattening it.

3. Double triangular fold. Using square paper, fold diagonally first, then forward and backward according to the angular line, stretch it out from the middle, and flatten it.

4. The folding method of double diamond. After folding the double square in 2, pull up one corner and fold it to the middle.

5. Concentrate on a corner fold. On the diagonal of the square paper, fold the adjacent sides facing each other.