-
Under normal circumstances, people can leave one day after the sewing, because this speed is solidified or under normal circumstances, and people can leave in one day after each sewing, because this speed is still relatively fast, and it can be completely solidified in 24 hours.
-
Under normal circumstances, you can leave after 24 hours after the beautiful sewing, because the coagulation speed is relatively fast, and it can be solidified within 24 hours, so you can leave after this day.
-
Generally speaking, it takes 12 hours to leave after making a perfect sewing, because it takes 12 hours to completely dry after the beautiful sewing is done, and 5 to 6 hours after doing the perfect sewing can be initially dry. Wait for the seam to dry completely, so as not to affect the effect of construction, and wait for the beauty of the seam to dry thoroughly to wipe the surface of the tile as a whole, so that the residual seam can be wiped clean.
-
It takes at least 6 hours to dry after the sewing is done, and about 12 hours for it to solidify completely, so it is best to walk after 12 hours. The tile is made of perfect joints, and the surface is smooth like porcelain after solidification, with high strength, wear-resistant, non-staining, easy to clean, and can be scrubbed together with the tile. After the tile is seambled, it has the characteristics of waterproof, moisture-proof and anti-penetration.
-
Under normal circumstances, as long as the ventilation is good, the sewing agent can reach a high hardness and gloss after 24 hours, and can be used normally, but it is necessary to avoid scratching, knocking and other destructive behaviors on the parts with the sewing agent, otherwise it will destroy the beauty of the sewing agent. If it is a newly renovated house, it is recommended to move after 72 hours if you are not in a hurry to live in it.
The beauty sewing agent is an upgraded product of the grout, and the decorative practicability of the beauty sewing agent is obviously better than that of the color caulk. It solves the problem of unsightly and dirty tile gaps. The traditional caulk is applied to the surface of the caulk, but the new caulk does not need caulk to be the bottom layer, and can be directly added to the tile gap after the tile is bonded.
-
After the sewing is done, you need to wait for the sewing material to be completely cured before leaving. In summer, when the temperature is high, the time to complete cure is relatively reduced, generally taking 12 to 24 hours.
-
After the seam is finished, the joint is generally pressed within half an hour, so that the seam can be slowly penetrated into the tile gap, and the seam can be pressed before the initial setting of the seam.
-
September and the wax moon should be the lunar months, the chrysanthemum fragrance in September is overflowing, and the plum blossoms in the wax moon are pretty. Because September is the season when chrysanthemums are in full bloom, almost all the other flowers have withered. The wax moon is the coldest season, and only the wax plum can.
-
The clouds are clever, the flying stars spread hatred, and the silver man is dark.
As soon as the golden wind and jade dew meet, they will win countless in the world.
Tenderness is like water, the best period is like a dream, and you can endure the return of the Magpie Bridge.
If the two love for a long time, how can it be in the morning and twilight?
-
Every candy you give out goes where it needs to go, in fact, the earth is round, and the good things you have done will eventually come back to you."
-
This question is more difficult.
If it is an 800*800 standard gap, this is so big that it can be constructed about 20 a day.
A 3 5 mm or so can be constructed 75 80 meters, that is to say, can be constructed 1500 meters 1600 meters.
Of course, this is the ideal state.
Because you may have to button the seams.
Because you might have to put on washi paper or wax.
Of course, there are other problems on the way to construction, so the actual construction is generally 10 to 15 a day, which is very good.
If you encounter parquet and mosaic, you can make 10 square meters a day, which is very good, and it depends on the specific situation of each family.
-
Normal skilled sewing masters, in the case of the construction standard of beautiful sewing, 8 hours a day, the average of each person per day is about 130 meters.
You may want to ask, how long does it take to complete a commercial house?
Most of the walls of the bathroom and kitchen balcony are now 300*600 inner wall tiles, the ground is 300*300 small square tiles, and the living room is 800*800 floor tiles with a small amount of parquet. The construction area of 100 square meters of commercial housing is about 400 meters normally, and a skilled worker is all over in 3-4 days!
The above answer is unspeakable,, boundless, unless he is a god! And the glue of his royal craftsmen is also a god, a 3-5mm tile gap can make 70 meters!
-
Yes, the beauty sewing agent is the last to do, but don't wait too long, too long there will be impurities and dust in the tile gap, it is difficult to clean, it will be more labor-intensive to do the beautiful seam, and the cost will be higher.
Tile seams: 1. From a practical point of view, there are benefits. It turns out that the gap is cement or caulk, which is not reliable and does not tolerate dirt. These two shortcomings can be avoided after using beautiful sewing.
2. Tile seam is a combination of art and home decoration, which can not only enhance the overall visual beauty of home decoration, but also highlight the quality of life and status.
3. The tiles are not beautiful, after a long time, the gaps begin to be gray and gray, and the heavy ones have more peculiar smells floating out, bacteria are overflowing, and the loss of stoves has caused a serious threat to the health of the family. The tile is made of beautiful seams, which avoids the emergence of the problem.
4. If there are conditions, you can do it in the whole house, or do it in public areas, such as living rooms, dining rooms, corridors, etc., if you are short of funds, do not do it temporarily, because the sewing agent can be done later. <>
-
1. In terms of time, there is a certain amount of static maintenance time after the completion of ceramic tile paving (the tile adhesive has not dried thoroughly after the ceramic tile has just been pasted, which will affect the beauty of the seam effect), and the beauty seam treatment can only be carried out after this time. The specified time in the industry: generally 7 days before the sewing can be carried out.
2. From the order of the decoration process, because the ceramic tile joint has high requirements for the on-site construction environment, it is best to carry out the tile joint after the construction process that is easy to produce dust and dirt, such as water and electricity, carpentry, etc.
3. In addition, the temperature of the construction site should be kept at about 5 °C to 30 °C, if it is a rainy day, you need to wait until the weather is sunny before proceeding, so as to ensure the effect of tile joints.
4 Finally, due to the different functional areas of home decoration, the best time for tile seaming is also slightly different.
5. The beauty of living room tiles is generally in the line after all the living room furniture enters the scene, so that on the one hand, it can ensure the decorative effect of the beautiful seams, on the other hand, it can also reduce the number of cleaning, keep clean and tidy. It should take a week for the living room tiles of the new house and the furniture to be sewn after entering the site.
6 The bathroom and kitchen are one of the most important functional areas in the home, and the tiles can be sewn after a week of resting, remember to be in front of the ceiling and cabinets! In this way, the integrity of the sewing can be maintained.
-
<> it takes at least 6 hours to leave after the sewing is done, and if the weather is cold, the coagulation speed of the sewing agent will be slowed down. Then the waiting time is about 12 hours. When buying a sewing agent, you must remember to choose a big brand, because the quality of this sewing agent is better, the ingredients are relatively safe, and it does not contain many toxic substances, so it will be more assured to use.
If you are too troublesome, you can find a professional to do the beautiful seam, non-professional construction may affect the beauty of the interior, and the beautiful seam may appear uneven.
Yes, before performing the second sewing, you need to choose the color, and you need to shovel off the previous one, clean the seam before proceeding with the second application. It is recommended that you must keep the joints clean and dry before construction. Hope mine can be helpful to you.
The operation steps of beauty sewing: gap treatment, pasting masking paper, installing glue gun, and sewing agent. >>>More
Before using Lougumei grout, the tile joint should be treated with ordinary cement-based grout or high-grade white cement mat, and the new caulk should be pressed out about about the depth from the tile surface with a tool of suitable shape and size; If the caulk has been filled in advance, the caulk in the tile joint should also be cleaned out with a suitable tool to a depth about about the surface of the brick. After the seam at the bottom of the mat is completely dry, use a vacuum cleaner or brush to thoroughly clean the surface of the work, free of dust, oil and other debris.
Yes. However, it is necessary to deal with the blackened gap beforehand. >>>More
The bathroom is an extremely humid place, and the tiles will often come into contact with moisture, so the gaps in the tiles are very easy to get dirty and moldy, and affect the health of the family. Therefore, it is necessary to sew the bathroom beautifully. >>>More