The air conditioner hole leaks with something to plug it

You can use the adhesive glass glue that is available at home to plug the gaps, give preference to neutral glass glue, neutral glue is mild, will not produce the negative effect of corrosion, pay attention to the quality comparison when buying glass glue, good glass glue will not produce mildew due to moisture and other factors, affecting the appearance; You can use a blowing agent to block the air conditioner's eyes, and a high-quality blowing agent can block the holes, and at the same time, it will also bring an unexpected effect of sound insulation, and at the same time, it will have a thermal insulation effect. In addition, it can also be plugged with waterproof mortar, provided that the air conditioning eye is not intended to be used for a long time, waterproof mortar is very firm after use because of its good adhesion and strong resistance to environmental adverse factors, if you want to reuse, it can only be solved by re-drilling with strong external force. If the air conditioning hole is well played, the water leakage will be effectively alleviated

1. The position of the air conditioner should be estimated at the height of the air conditioner, and the selected position should be lower than the height of the air conditioner water tray, which is conducive to the discharge of condensate; 2. The drilling of the air conditioning eye should form a slight downward slope from the indoor to the outdoor direction to prevent the water flow brought by rainfall; 3. The determination of the size of the air conditioner eyelet should consider the safety of the house and will not cause harm to the structure of the house. 4. The position of the air conditioner eye should be selected to consider the relevant circulation, and it should also be avoided in places that are prone to noise, which can reduce indoor noise pollution.

If the air conditioner hole is leaking, you can play expansion foam glue, after filling, scrape the surface and slightly lower than the wall, and then fill the putty leveling and painting. You can also use foam such as sponge to plug the hole tightly, and then make a thick wooden board as big as the hole, about 3 cm thick, stuff it into the hole and fix it, and then apply the same wall paint as the wall after the surface treatment is flattened.

The advantages of expanded foam glue are sealing, waterproofing, heat insulation, and good filling effect.

The reason may be that the installation of the air conditioner drain pipe is not in the right place, and it is a rainy weather outside, and the rain seeps in from the pipe, so the air conditioner can be reinstalled to solve the problem; The reason may be that the hole gap of the air conditioner is too large, which can be solved by plugging the hole with thermal insulation material; The reason may be that the air conditioner hole is not closed with expanded foam glue after installation, and you can buy foam glue for sealing work by yourself. 1. If the leakage effect of the drainage pipe is not good, the installation location is not suitable for drainage, and the height of the pipeline needs to be adjusted. In addition, it may be that the drainage pipe at the air conditioning hole is too close to each other, resulting in the condensate flowing from the air conditioning hole to the room during drainage, and it is necessary to purchase a drainage hose and connect it to the original drainage pipe, so that the condensate can be discharged outdoors normally.

2. If the hole diameter of the air conditioner is large, then the rainwater will blow from the gap to the room in outdoor rain and windy weather, and it needs to be filled with insulation materials to solve the problem of rain seepage. 3. After the installation of the drainage pipes of the air conditioner, the installation master will use the fixing tape to fill and reinforce the work, if you do not do this work, you can buy expansion foam glue by yourself, first clean up the stones, debris, dust and other things at the air conditioning holes, and then reconcile the expansion foam glue, apply it to the gaps, and wait for it to dry to play an effective role.

It may be that the water tray of the air conditioner is blocked, the drainage pipe is blocked, and you need to clean up the dirt and foreign objects inside; It may also be that the drain pipe is installed at the wrong angle and the garbage accumulates inside, so be sure to clean it up. 1. First of all, we must confirm whether the refrigeration state is not good, the refrigeration state is not good, it will not drain, if the refrigeration is normal, it may be that the drainage pipe is blocked, and the indoor machine will leak after a long time, because the indoor unit has a water tank, which is not full and normal, and it will overflow if it is more, of course, you must also clearly say whether the drainage is so when it is installed or recently, if it is newly installed, it may not be clogged with dirt, maybe the drainage pipe is not installed. 2. The internal machine is not properly installed, usually the internal machine should be installed horizontally or tilted towards the condensate drain outlet.

If it is tilted in the opposite direction, it will cause the condensate to overflow and drip, which can be solved by adjusting the tilt angle. 3. The condensate pipe is blocked, resulting in overflow due to the inability of condensate to be discharged, and the phenomenon of dripping water can be solved. 4. Fan failure or filter blockage, resulting in cold energy can not be taken away, resulting in evaporator condensation (or even freezing), this situation is usually the air volume of the inner machine is small, if it is a filter problem, you can try to clean the filter screen, if it is a fan problem, you need to find a professional for maintenance.

You can use the adhesive glass glue that is available at home to plug the gaps, give preference to neutral glass glue, neutral glue is milder, will not produce the negative effect of field corrosion, pay attention to the quality comparison when buying glass glue, good glass glue will not produce mildew due to moisture and other factors, affecting the appearance; You can use a foaming agent to block the air conditioner's eyes, and at the same time, the high-quality foaming agent can block the hole, and at the same time, it will also bring the unexpected effect of sound insulation, and at the same time it will have a thermal insulation effect.

In addition, it can also be plugged with waterproof mortar, provided that the air conditioning eye is not intended to be used for a long time, waterproof mortar is very firm after use because of its good adhesion and strong resistance to environmental adverse factors, if you want to reuse, it can only be solved by re-drilling with strong external force.

If the air conditioning hole is well played, the water leakage will be effectively alleviated

1. The position of the air conditioner should be estimated at the height of the air conditioner, and the selected position should be lower than the height of the air conditioner water tray, which is conducive to the discharge of condensate;

2. The drilling of the air conditioning eye should form a slight downward slope from the indoor to the outdoor direction to prevent the water flow brought by rainfall;

3. The determination of the size of the air conditioner eyelet should consider the safety of the house and will not cause harm to the structure of the house.

4. The location of the air conditioner eye should consider the relevant circulation, and it should also be avoided in places that are prone to noise, and the hall can be built to reduce indoor noise pollution.

The causes of air conditioner leakage are as follows:1The displacement of the units inside the air conditioner during the air conditioning shift means that the air conditioner cannot fit snugly against the wall, which will make it difficult for the air conditioner to drain water.

If the installation position is improper, the internal unit will tilt, and the rescue will cause the pipe position to be too high, and improper drainage will cause water leakage. In this case, simply move the body, re-measure the position of the air conditioner with a level gauge, and lower the air conditioner to one end of the condenser drain as much as possible. 2.

The drain is clogged. Check whether the water outlet of the air conditioner is blocked, or the stain inside the box next to the ice mill blocks the water outlet pipe, causing the water to be blocked, and the water cannot be discharged, resulting in the leakage of the empty rubber conditioner. At this time, check whether the drain pipe and air conditioning pipe are connected accurately.

If dust clogs the drain, you can use a high-pressure water gun and a special air conditioner cleaning tool to unclog the drain. 3.Poor drain drainageDue to the aging or bending of the drain pipe, the air conditioner water cannot be discharged, resulting in water leakage.

The solution is to buy a drain pipe replacement or ask the air conditioner to replace and repair the air conditioner drain after the sale. 4.Poor pipe insulation.

If the insulation material is too thin or of poor quality, the insulation pipe is not fully wrapped, and condensation will occur when the refrigerant in the insulation pipe passes through. At this time, you should first open the tape and check if the insulation material is aged or improperly sealed. If cracks or thinning of the insulation are found, repack the pipe and replace the aging insulation to maintain the tightness of the pipe and prevent water leakage.

It can be tightened with styrofoam or plugged with a sponge.

1. Beat the styrofoam. When the air conditioner hole leaks, you can use styrofoam to hit the hole, the volume of this styrofoam will expand after it is played, and it can also be waterproof and insulated, the filling effect is very good, you can fill all the gaps, and the extra part of the surface can be scraped flat with a knife, and then brushed with putty leveling.

2. Plug tightly with a sponge. You can also directly choose the sponge glue sponge to plug in the hole, then fix it with a wooden stopper, level it, and then apply putty and a top coat as big as the color of the wall. If the hole is not used for a long time, it can be completely sealed with waterproof mortar.

Re-punch later when needed.

1.Clean the air conditioner holes: First of all, you need to clean the air conditioner holes and clean the dust and dirt around the air conditioner holes so as not to affect the normal drainage of the air conditioner.

2.Check the drains: Drains can become clogged, preventing water from draining properly. Pipes can be cleaned with a professional drain cleaner or with steel wire.

3.Replace the drain pipes: If the drain is old or damaged, you need to replace the drain with a new one.

4.Adjust the installation position of the air conditioner: If the installation position of the air conditioner is not suitable, it may lead to poor drainage, and the installation position of the air raid guess needs to be readjusted.

5.Replace the internal parts of the air conditioner: If the internal parts of the air conditioner are damaged or deteriorated, it may lead to water leakage problems, and it is necessary to replace the parts that should be used by the air conditioner.

6.Ask a professional to repair: If the above methods cannot solve the problem, it is recommended to ask a professional air conditioner maintenance personnel to repair and repair.