How do you fix a broken zipper pull? How to repair a broken zipper pull

For zippers with zipper head locks, the zipper head lock needs to be removed before it can be used again. For the solution that the zipper head cannot lock the two zippers, the upper and lower surfaces of the basket body are slightly squeezed with pliers to make the gap smaller, so that the chain will be more natural. If the effect of this method is not obvious, the front of the zipper body is tightened.

Of course, in the case of emergency, directly use a thin wire to pass through the small hole between the zipper lock and the zipper body, and entangle the two ends of the wire, which can also be used urgently. In the event of a breakage or loosening of the zipper body, it is recommended to replace it with a new one. Or go to a dedicated zipper repair service for repairs.

Zipper pulls are closely related to our lives, and all kinds of clothing are equipped with zipper pulls with a variety of appearances. Especially for some high-end clothes, the unique zipper puller can indeed add rich color and personality to the overall appearance of the clothes. If the zipper puller is broken inadvertently, it is a very troublesome thing, because for different clothes, the zipper puller has different collocations, even if you change a new one, you may not be able to find it.

At this point, the only effective solution is to fix it yourself, and maybe make something special. First of all, let's take a look at the basic composition of the zipper head, which is composed of several important parts such as the pull tab, the pull tab lock, the zipper body and the zipper head lock. The function of the pull tab is to drag the zipper head, the function of the pull tab lock is to combine the pull tab with the zipper body, the important role of the zipper head lock is to prevent the zipper head from sliding due to other external forces in the case of non-artificial dragging, and the function of the zipper body is to interlock the two zippers.

When the pull tab is accidentally damaged, the best solution is to find an old zipper that is unused, remove the tab, and install it on top of the new zipper. In fact, the most critical part at this time is the disassembly and assembly method of the pull tab, use a screwdriver or other sharp tools to pry off the pull tab lock of the old zipper, and then you can remove the pull tab lock, the same is true when installing the pull tab, when the pull tab is installed, and then buckle the pull tab lock back to the zipper body in situ. The solution to the damage of the pull tab lockWhen the pull tab lock is inadvertently lost or damaged, for the zipper without a zipper head lock, the pull tab can be directly thrown away and then used directly.

First dial the top tooth of the zipper with pliers, dial it on both sides, and then pull the lock of the zipper to the top and then merge the teeth on both sides together, and then put the zipper lock into it (there is a certain degree of difficulty, because the diameter of the metal zipper is thicker, if you really can't fit in, cut a small hole on the radial line, remember, don't cut it in the place where the big tooth is installed, it should be cut by the top place, otherwise the big tooth will not be installed) When the opening and closing is not smooth, if you pull the chain head hard, it will produce a tooth element occlusion failure. At this time, apply paraffin wax or lubricating spray to the surface and inside of the tooth, then move the slider several times and slide easily.

The zipper puller is broken, and the tips for repairing it are as follows:Tools Ingredients: 1 zipper pull, 1 fork.

1. Flip the zipper over.

Pull the zipper up and flip the zipper over with the back side up.

2. Pull the clothes out.

Take out the clothes on both sides of the back that are stuck in the zipper.

3. Pull the zipper to the top.

Then pull the zipper to the very top, so that your zipper will be back to its original shape.

4. Remove the old zipper.

Remove the broken zipper puller with a tool and prepare a new zipper.

5. Put the new zipper puller on the fork.

Place the new zipper puller on top of a fork and align the fork with the bottom of the zipper.

6. Pull the zipper to the other side.

Attach the new zipper puller to the top of the zipper and pull the zipper to the other side.

7. Clamp one side of the zipper.

Prepare a pair of pliers, find where your zipper puller is located, and use the pliers to grip one side of the zipper pull.

8. Press the pliers.

Press firmly on the pliers so that the zipper puller and zipper fit together.

9. Press down the zipper on the other side.

The zipper puller on the other side should also be pressed down with pliers, and the zipper can be pulled up after the press is completed. <>

Prepare a straw, cut 2-3 cm, then cut it from the middle, fold the straw in half and level it after cutting. Apply a small amount of hot melt adhesive to both sides of the straw and glue the straw to the top of the zipper pull, then press with pliers. Cut off the excess at the end of the straw to snap the zipper puller into the lock.

1. Prepare a straw, cut 2-3 cm, then cut it from the middle, fold the straw in half and level it after cutting.

2. Apply a small amount of hot melt adhesive on both sides of the straw, glue the straw to the position of the zipper pull, and then press it with pliers.

3. Cut off the excess part at the end of the straw, and then the zipper puller can be buckled into the lock.

1. What should I do if the zipper is broken? It doesn't fit together.

2. What should I do if the zipper does not move.

3. What should I do if the zipper will crack when I close it?

4. What should I do if the zipper of my clothes is stuck?

1.If the zipper is stuck, you can first straighten the zipper, then pull the tail of the zipper, and then slowly pull it up and down.

2.You can also apply wax or lubricating oil on the zipper to solve the situation that the zipper is stuck, so as to make the zipper smooth.