How to change the zipper puller yourself, how to change the zipper pull

Hello, how to change the zipper pull, this needs to open the collar of the clothes to change, change it, and then sew it.

Here's how:

Start with a big tooth on the top of the zipper.

Dial it down with pliers, and both sides should dial it.

Then I pull the lock of the fastener to the top. Then merge the teeth of both sides together.

Then put the zipper lock into it (there is a certain difficulty, because the diameter of the metal zipper is thicker than the force, if the real can't be set, cut a small hole on the radial line, remember, don't cut in the middle of the big tooth, should be cut by the middle of the top, otherwise the big tooth will not be fitted).

After the zipper lock is put in, you can put the big teeth on.

How do we change the zipper if we want to change it ourselves?

First, remove the old zipper, which can be cut intermittently, and then slowly remove it.

Prepare a new zipper, preferably just the right length, at least not too short, because if it is long, it will be easy to do, and if it is short, it will be troublesome.

Start by attaching the new zipper to the garment with a green thread by simply sewing a few stitches.

Start sewing from the bottom left side of the jacket, and the stitches should be finer.

When sewing to the top, cut the long-growing zipper at an angle, and slowly tuck it into the seam of the garment. The right side is also slowly sewn up like this.

The right side can't be fixed, and it's a bit complicated to sew, so you need to cut off the part that grows out, sew it into the crack, and then use scissors to remove the pins and threads used for fixing, and tidy up the clothes, so that the new zipper of the clothes is replaced in this way.

If you want to sew it yourself and better it, you can try it yourself, the manual one can be very slow, and you also need to be patient to sew it well. Satisfied.

Are eye exercises useful? Expert Physician: Mainly for protection!

Zippers are very useful in our clothes, shoes, and bags, but zippers belong to the fragile part, and the zipper pulls will be broken after a long time. In many cases, the front is pulled up and the back is opened, in this case the zipper head is broken, you can use pliers to clip the tail of the zipper pull, but if you want to completely solve the problem, you have to change the zipper pull. I'll share with you a dry item for changing the zipper pull.

There are many models of zipper pullers that we usually use, if you take off the zipper pullers on other clothes and change them directly on the clothes you need, the models are not the same, and even if you pull them up, it won't take a few days to open.

Here's how to change the zipper pull:Tools Raw materials: sliders, pliers, screwdrivers.

1. Today, take the student's schoolbag as an example, the child has to carry the schoolbag every day, the head is easy to break during use, the repair is very simple, and those who want to learn come and watch.

2. First of all, the tools are ready, sliders, screwdrivers, pliers.

Anywhere on the zipper, cut a small opening, and the intact slider will be removed.

<>4. Use a screwdriver to insert it from the middle of the bottom, and break it downward, and the broken slider is like this.

<>5. Take any part of the zipper of the schoolbag and insert the slider diagonally.

<>6. Use the same method on the other side, after installation, see that the zippers on both sides should be in the slider, press and hold the slider with your hand, and clamp the bottom with pliers.

<>7. After pulling the slider to one side, gently pull it up, if the zipper at the junction with the cloth is separated, close the first few of the zipper with your hand, and then pull it up.

<>8. It's changed, although it's different from the factory zipper, but the schoolbag can be used normally.

Some tabs can be replaced, while others cannot be replaced. Don't know what your zipper is.

The pull tab of the zipper on jeans cannot be changed.

The zippers on bags and bags can be changed.

The zipper of the top, you can judge it this way. Do not touch the pull tab with your hand, pull the separate cloth tape on both sides, if the slider will slide back, the pull tab of this zipper can be changed.

Tips for changing the zipper pull: To change the zipper pull, you first need to pull the zipper to the top, and then remove the chain that blocks the top, and then remove the zipper pull, and then install the new zipper pullFrictionIf the zipper cannot be pulled, do not continue to pull it, so as not to damage the zipper.

1. Replacement steps.

To change the zipper pull, you first need to pull the zipper to the top and try to see if you can remove it directly, if you can't remove it, you should use tweezers.

Remove the chain that blocks the top, remove the zipper pull, and finally install a new zipper pull.

2. Apply wax oil.

After the zipper puller is installed, you can apply wax oil on the chain, the wax oil lubrication effect is excellent, and the friction between the zipper head and the chain is reduced after application, which is more convenient for stretching, and if there is a blockage during ordinary use, it can be suitable for wax oil treatment.

3. Precautions.

If the zipper puller does not move during use, do not pull it hard to avoid damaging the zipper puller, and then take off the clothes to see the cause of the blockage.

Prepare materials: awl, pliers.

6. Done.

The zipper puller has fallen off, how can I easily put it back in? It's actually very simple, and you can learn it at a glance.

Hello dear! How to install the chain head off: First prepare a lighter, use the lighter to burn the cloth surface of the fallen off end to prevent it from falling off, and place the zipper on the table with the level facing up.

Pull the zipper head into the teeth with the teeth facing up, and pull both ends of the cloth belt together and pull it outward.

The zipper head will go down the tension of the cloth belt to the outside into the teeth, and the slider will be installed after the cloth belt is pulled out, pull out the excess teeth with oblique nose pliers, do not use too much force, so as not to break the cloth strip, install the lower teeth to prevent the zipper from sliding out.

When using it at ordinary times, if the zipper is loose and the teeth are missing, you can use a small hammer to gently knock a few times on the zipper head to make the upper and lower chain teeth bite tighter, and the teeth will not be removed again.

Down jackets are generally made of resin (plastic) sliders. You find the corresponding model slider and remove the top stop of the zipper on the side of the slider (there will be a slightly larger plastic tooth near the neck, which is called the top stop). You can also try to see if you can take out the slider if you don't take it out, if you can take it out, don't destroy it, if you can't take it out, in addition to removing the big tooth, the best way is to think of removing the place that prevents the slider from coming out, (generally a small hook, or a raised piece, or there is a small dot and so on to prevent the slider from coming out of the injection structure), so that you can take out the slider and replace it with a new slider.

Usually, this slider will not come out on its own, don't worry. In the past, it was freely replaced, but in recent years, in order to prevent the slider from falling off when washing, especially children's clothing, and to prevent children from taking out the slider with their hands or mouth, it is designed to prevent it from taking off. If you're an adult, it doesn't matter. Hehehe.