Can the grass rope of the grass cutter be replaced by thin steel wire?

Functionally, it is possible, but it is extremely dangerous for operators, bystanders, and the construction site being handled!! It is definitely not recommended.

No, pure thin wire definitely won't work, otherwise there would be no such thing as nylon rope. However, now there is a kind of steel wire grass rope, internal steel wire, external high-strength nylon, if you need it, you can use it privately.

Brush cutter grass rope winding method.

1. Unload the grass head, there is a place to wrap the grass rope inside.

2. Fold the straw rope in half, get stuck in the place where the straw rope is wound, and wrap it inside.

3. When the winding is almost finished, thread the straw rope out of the grooves on both sides.

These are the steps to wrap the rope.

Lawn mowers are particularly important for the development of agricultural mechanization, improve work efficiency, and improve agricultural production efficiency in a large agricultural country like ours. In countries with a high degree of mechanization of animal husbandry, the research of new lawn mowers is developing in the direction of high speed and energy saving.

Unload the grass head, and there is a du wrapped grass rope in the bai.

Fold the grass rope in half, get stuck in the ground back of the winding grass rope, and thread the grass rope out of the grooves on both sides of the answer.

The length of the grass rope should not be too long, 10-15cm is appropriate, when installing a knot on the shaft or on the grass head, from the opposite direction of the rope, otherwise the rope will come out of the grass process, the length of the grass rope at both ends should be consistent, otherwise the grass will shake due to imbalance. The lawn mower is only suitable for beating young grass, and old grass that is too thick or has been lignified needs to be cut with a blade.

Straw rope is a combination of two threads to wear, this is a whole figure)

How mowing (mower) works:

The power system transmits the power to this rotating wheel through belt transmission, the rotating wheel is connected to the header part, the gear transmission box is installed in the header, the round cutting disc is connected below the header, the three cutting knives are evenly installed on the cutting disc, the three cutting knives are evenly installed on the belt disc of the heading table, and the header drives the circular cutting disc to rotate at high speed.

The header is connected with the machine frame through these two connection points, and the position of this connection above can be changed, and by changing the position of these two screws, the ground clearance of the header can be moderately adjusted, and the purpose of adjusting the height of the stubble can be achieved.

This is the header guard, which is attached to the frame and is mainly used to block the debris rolled up during the cutter operation, so as not to injure the operator behind it.

Remove the grass heads. There is a place to wrap a straw rope inside.

Fold the straw rope in half. Stuck in the place where the straw rope is entangled. Just wrap it inside.

When the wrapping is almost finished, thread the straw rope out of the grooves on both sides.

Lawn mower, also known as lawn mower, lawn mower, lawn mower, etc., lawn mower is a mechanical tool used to mow lawn, vegetation, etc., there are diesel engines and gasoline engines. It is composed of cutterhead, engine, walking wheel, traveling mechanism, blade, handrail, control and other parts. The blade takes advantage of the high-speed rotation of the engine to output a large speed, which saves the working time of the weeders and reduces a lot of human resources.

In countries with a high degree of mechanization of animal husbandry, the research of new lawn mowers is developing in the direction of high speed and energy saving.

Lawn mower for the development of agricultural mechanization, improve work efficiency, improve agricultural production efficiency, in our agricultural country seems to be an important lawn mower as an important tool in agricultural production, has the most direct impact on the yield of crops, its invention is a great progress of human civilization.

Grass cutter grass rope installation.

Disassemble the grass head, then take out the core inside and wrap the straw rope.

The length of the grass rope should not be too long, 10-15cm is appropriate, it is not easy to beat, it is not easy to control, and it is easy to break. When installing, a knot should be tied on the shaft or on the grass head, and the rope is out from the opposite direction, otherwise the rope will come out in the process of beating the grass; The length of the rope at both ends should be the same, otherwise the grass will shake due to imbalance. The lawn mower is only suitable for beating young grass, too thick, or even old grass that has been lignified, and needs to be cut with a blade.

Disassemble the grass head and remove the rewinding rope base. General.

system, it will have an arrow on it, Shun.

Du in the direction of the arrow around the zhi dao. When there are about 10 centimeters left of the rope, they are stuck on the bayonet on the edge of the rope base. Then, put it back in as it looked when you dismantled it.

Idea: Before closing the lid, thread the rope through the two holes in the rope box and pull the rope out of the bayonet around the rope base.

Some use two ropes to beat the grass, while others use one rope. It depends on your own straw head style.

Summary. First of all, you need to disassemble the rope of the moadber and take out the rope base. When disassembling, you can go around it in the direction of the arrow marked on the mower.

However, when the grass rope of the mower is wound to the remaining 10 centimeters, it is stuck on the bayonet on the edge of the rope base. Then follow the previous steps to install it.

When winding the rope of the mower, it should be noted that the rope should be threaded in the two holes of the rope box before closing the lid, and the rope should be pulled out of the bayonet of the rope base.

In addition, some lawn beaters use one rope, and some lawn beaters use two ropes, but the method of winding the rope is similar, and the specific decision is based on the style of the grass head used.

How to wrap the grass rope of the lawn mower?

Hello, I have seen your question and am sorting out the answer, please wait a while

First of all, you need to disassemble the rope of the moadber and take out the rope base. When disassembling, you can go around it in the direction of the arrow marked on the mower. However, when the grass rope of the mower is wound to the remaining 10 centimeters, it is stuck on the bayonet on the edge of the rope base.

Then follow the previous steps to install it. When winding the rope of the mower, it should be noted that the rope should be threaded in the two holes of the rope box before closing the lid, and the rope should be pulled out of the bayonet of the rope base. In addition, some lawn beaters use one rope, and some lawn beaters use two ropes, but the method of winding the rope is similar, and the specific decision is based on the style of the grass head used.