Where is the paint room responsible for calibration, and how to choose the paint room? Automobile pa

How to use the spray paint baking paint room:

No flammable or explosive materials shall be stored in the baking room.

At the end of each operation, the oven must be cleaned and any cover used to cover up unsprayed objects must be cleaned. It is recommended to vacuum the floor net and the floor in the room once a week.

The supply voltage must not be lower or higher than 10 of the specified voltage.

If the burner does not ignite at one time, please wait for 3 minutes and then press the red light button on the control box. If the fire does not ignite four times in a row, remove the oil from the heat exchanger, identify and eliminate the fault, and then start the burner.

The diesel fuel used must be higher than the local minimum night temperature5 and no reclaimed oil, water or other impurities shall be used.

The oven is only allowed to be used in an environment where there is no danger and open flame, and smoking in the room is strictly prohibited.

The manufacturer is not responsible for all liability caused by unauthorized alteration of the equipment without the manufacturer's approval.

The manufacturer is not responsible for any unauthorized removal or tampering with protective or safety devices.

Do not use solvents with low boiling points to clean the walls of the room.

When the equipment is working, someone must monitor it, and after the work is completed, all the switches must be reset to the shutdown position.

This equipment must be operated by a professional who is familiar with the specifications for the operation of the equipment. l No flammable or explosive materials shall be stored in the baking room.

At the end of each operation, the oven must be cleaned and any cover used to cover up unsprayed objects must be cleaned. It is recommended to vacuum the floor net and the floor in the room once a week.

The supply voltage must not be lower or higher than 10 of the specified voltage.

If the burner does not ignite at one time, please wait for 3 minutes and then press the red light button on the control box. If the fire does not ignite four times in a row, remove the oil from the heat exchanger, identify and eliminate the fault, and then start the burner.

The diesel fuel used must be higher than the local minimum night temperature5 and no reclaimed oil, water or other impurities shall be used.

The oven is only allowed to be used in an environment where there is no danger and open flame, and smoking in the room is strictly prohibited.

The manufacturer is not responsible for all liability caused by unauthorized alteration of the equipment without the manufacturer's approval.

The manufacturer is not responsible for any unauthorized removal or tampering with protective or safety devices.

Do not use solvents with low boiling points to clean the walls of the room.

When the equipment is working, someone must monitor it, and after the work is completed, all the switches must be reset to the shutdown position.

This equipment must be operated by a professional who is familiar with the specifications for the operation of the equipment.

The paint booth is customized according to the customer's needs, and there is no fixed number of squares.

Hello, there are standard paint rooms, and non-standard, depending on which one you use, as well as the quality and price to use, at present, there are more paint rooms in Yancheng, Jiangsu, Guangzhou, and Shandong, the price of Yancheng is the most expensive, Shandong's cheapest, the quality of the large is good, Guangzhou and Yancheng are not worse than the large, but the price is cheaper than the large. If you need it, you can ask me to recommend a few for you, basically I know everyone in this industry. Hope it helps.

Hello, specializing in the production of paint room filter cotton, filter.

I don't know where you are, there should be quite a lot of paint roomsGenerally, the production or sales of paint booths have accessories, but also have maintenance items. Hope it helps.

You can go to Zhongda Group in Yancheng, Jiangsu Province, they are a professional factory that produces car paint booths, and also produces a lot of auto maintenance equipment.

It mainly depends on where you are, but in terms of quality, Beijing is the best, followed by Jiangsu and Guangdong, the worst is Shandong, the paint room is used to rest assured of quality, I personally recommend you to buy Beijing, it is about 60,000, if you want to buy cheap, then Shandong's about 30,000.

What's your last name? Where? I'm Zhangqiu Xinkai paint room, I don't know what you need? I hope I can help you solve the problem, you can also make a friend, you can call us if you need it! Thank you!

Your **, the transfer of our family, made in Yancheng, Jiangsu.

Shenyang Weilong Industrial Coating****.

I personally recommend Boyu Kyushu coating equipment ****, which our company has used and the quality is good.

Is it broken or not wanting one.

Tie Zhongcheng's paint room is good, ***, after-sales service is in place, Tie Zhongcheng is a company specializing in the production of paint room, I have always used this brand, the quality is really not said.

I've been doing auto maintenance for more than ten years, and I haven't heard of this brand, so I advertise it myself, haha.

The brand is good, ***, and the good after-sales service is Zhongda, and there are offices all over the country.

The brand quality is also said in the past, Baozhongbao, Guangli, etc., and there are few service outlets.

Yancheng's Sewei paint room is also good, lifetime warranty, I sold a few, it's really OK, contact me in the northwest.

Keep the distance between the heating elements at 30 to 50 cm, the length of the heating element should be a little less than the height of the oven, and the heating element should be installed with a professional electrician.

Iron into the paint room in general,

That's right, there are indeed a lot of paint room manufacturers in Shandong, and there are only a few of them, Jinan Huayu brand paint room is of good quality, it is a big factory, if you want to buy paint room, you can inspect it.

How many years has it been used! If it's less than 3 years, it's 5,000 yuan, and if it's too old, you'll have to sell scrap metal! About 2,000!

How long has it been, the car's is still furniture.

What brand is it, how many years have it been, has it been dismantled, is it electric heating or oil burning.

1. You can refer to some information, China Coating Technology Forum.

2. Shop around.

Hello, we are Zhongda Group, the auto maintenance department, the structure and performance of this oven, the large oven is not said, the equipment is good, there will be no problems with the equipment for 20 years, and the general high-end 4S shops and repair shops use the Zhongda oven.

The company** 0515 6666 6666 Zhongda Auto Maintenance Sales Company.

The company specializes in the design and production of paint room.

The paint room is a kind of equipment for painting, dyeing and drying the surface of the equipment, which can not only play a beautiful role in the equipment, but also protect the goods; It can not only prevent the object from being corroded in the harsh environment of moisture and dust, but also spray paint can be high-grade to prevent the erosion of metal parts and delay the aging of plastic parts; At the same time, the design style of artistic aesthetics can be achieved through spray painting and coloring, so that the appearance of the object is more beautiful, and more commercial value and visual beauty can be brought to the object. The paint room is an important equipment for the decoration and repair of the surface of objects through technical treatment. In short, the paint room is generally used for spraying and baking paint, so the most accurate description of the paint room should be "spray paint room".

It is widely used in automobile, pinianqi machinery, hardware, furniture, FRP products, chemical equipment and other industries of workpiece surface painting, baking paint construction operations.

The paint baking room is basically the same, but the skills of the workers are different!

Iron into the paint room, quite good.