Methods of use and maintenance of the grease machine

Now there are so many kinds! Hand pressed! Foot on it!

Pneumatic push! Pretty much the same pull! The first butter must be cleaned and don't bring the scum into the grease gun!

Second, after the fight, you have to release the pressure! "If the hand press and foot step on the shaft are broken, it can't be repaired! The piston of the air push should be fine".

Butter is the function of lubrication, which is generally added to the rotating parts such as bearings and king needles to play the role of lubrication, so that the use is long-lasting and convenient.

Anhydrous alcohol: Pour over the butter stain and dissolve the butter. Rinse with water and then rinse with regular laundry detergent.

Gasoline: After washing off the butter stains with gasoline, you need to wash it with a non-phosphorus laundry detergent. Dish soap to heat the water:

Bring water to a boil, pour it into a basin until the water temperature is about 80 degrees, and soak the butter in the warm water. Soak for about 10 minutes and wash with a few drops of dish soap. <

1. If the oil stain is small, use alcohol, it is best to use anhydrous alcohol, pour it directly on the butter stain, and dissolve the butter. Then rinse with clean water and wash it off with your regular laundry routine.

2. If the butter stains on the clothes are relatively large and stubborn, then you need to attack the oil with oil. Gasoline is an organic solution that dissolves oil stains and other substances, and after washing off butter stains with gasoline, it is also necessary to clean it with phosphorus-free laundry detergent.

3. Heat the water with dish soap, boil the water, pour it into the basin when the water temperature reaches about 80 degrees, and soak the greasy part of the clothes in warm water. Soak in warm water for about 10 minutes and drop a few drops of dish soap. Because it is an oil stain, it will work faster with dish soap.

Hello! The automatic butter machine can't add butter to solve the spring Qi decision method 1, unscrew the oil gun head, so that the Chanling oil gun head is separated from the gun barrel. Lock the barrel tail locking tab and push the barrel handle to the end.

2. Dip the beginning of the grease gun into the butter barrel to a depth of about 30 mm, pull the handle of the barrel and suck the butter into the barrel. 30mm pull out 3, re-screw the yellow gun head, press and hold the tail of the gun barrel to lock, push, and start to exhaust from the handle. 4. Use your fingertips to control the exhaust holes, see that there is grease discharged from the exhaust holes, and complete the exhaust.

Nail point pressure discharge Exhaust hole has fat porosity balls Discharge 5, confirm the position of the equipment to add fat, complete the connection of the nozzle, and shake the crank with arm strength to fill the butter. Confirm that the grease port of the device is connected and press firmly.

1. The butter used in the machine can be cleaned with anhydrous and allotment alcohol, poured directly on the oil stains, dissolved the oil, and then rinsed with clean water, and then washed with conventional laundry procedures, or with gasoline, gasoline is an organic solution, which can dissolve oil stains and other substances.

2. Butter lubrication system, as the name suggests, is classified by the lubricating oil products used, so there is another oil lubrication system, in fact, there is also a lubrication system with cutting water, Taikoo oil, etc. as the medium, but generally speaking, the main purpose of using cutting water and Taikoo oil is cooling, and the secondary purpose is lubrication, so it is generally still mainly classified by butter and engine oil.

1. Wash off the mechanical butter and use hand sanitizer for the best effect. Take out an appropriate amount of hand sanitizer with your hands stained with mechanical butter, rub it repeatedly with your hands, and bury the hand sanitizer to fully mix it with the oil and dissolve the clump. Rinse your hands with clean water to see that all the butter on your hands has been washed off.

2. It can be cleaned with alcohol. Alcohol can be soluble in both organic solvents and water, the higher the alcohol concentration, the better, preferably anhydrous alcohol.

3. Mix a little toothpaste with laundry detergent and scrub the mechanical butter on the clothes, and the oil stains can be removed.