Is the car very colored car film good, and what is the quality of the community version notice area

The film should not only choose regular products, but also pay attention to the construction process of the car film. Because the effect of the film depends largely on the application process.

1. In order to avoid dust and impurities affecting the effect of the film, the body glass should be cleaned first before the car film.

2. The parts that may be damaged during the car film should be covered in advance to prevent scratching the car paint, interior and other parts; Accessories that may affect construction also need to be disassembled in advance.

3. After the overall treatment of the car body, it is necessary to start cutting the car film, and the car film should be preliminarily cut according to the size of the glass.

4. Paste the roughly cut car film on the car glass, and then the front and rear gears need to bake the film according to the amplitude of the car glass, and the effect is to make the amplitude of the car film close to the glass, so that the car film will be flat and free of water marks.

5. After baking, the film will be very obediently attached to the glass, and then it is necessary to make further corrections, that is, according to the shape of the glass, the corresponding shape will be finely cut.

6. The glass film is pasted inside, so the key step is to put on the film, and the requirement of the upper mold is to clean the inside of the glass, which is fast and accurate, and pushes out the moisture as soon as possible.

7. After all the work is done, the last need to do an inspection work, after the whole vehicle is pasted, the situation of each window should be checked, especially the corners, and the blistering phenomenon should be dealt with immediately.

Reminder: After the film, it is required that the window cannot be opened for 2-5 days, the rear gear cannot use the defogging function, and the front windshield cannot use the air conditioner to blow the air; Do not use toothed objects to scratch the glass; After the construction is completed, the warranty application form must be filled in, so that the after-sales service in the future can be guaranteed; After 3 days of car film, it is best to go back to the store for a re-inspection, and if there is any quality problem, it should be repaired in time.

I haven't heard of it.,It's recommended to stick it a little better.,Weigu,Meiji,3M these.。

There are many colors of car film, car film and body color matching is very important, so it is more difficult to choose a suitable color car film, so which color of car film is good, the following will introduce you to the choice of car film color regret car.

Which color is better for car film

1. Color selection of automobile front windshield

The color of the automobile front windshield film is preferentially selected as a light-colored film.

2. Car side tailgate film selection

1) If the car is white, you can choose sea green, supernatural color, olive green and other colors.

2) If the body is pure blue or red, you can choose super natural color.

3) If the body is black, you can choose olive green, carbon black, dark natural color and other colors.

4) If the body is silver-gray, you can choose light natural color, super natural color, olive green and other colors.

5) If the car glass is green, light natural color should be used.

6) If you pay attention to creating a private space, you can choose carbon black and dark natural color.

How to choose a car film

1. Clarity

The light transmittance of the high-quality film can be as high as 70%, and regardless of the color level, the objects can be clearly seen 6 meters away at night, while the inferior film will have a foggy feeling.

2. Feel the temperature

The film of the car needs to have a good thermal insulation rate, the effect of thermal insulation is related to the comfort of passengers and the energy saving of the vehicle, if you are not assured, you can put the car film in the sun, and then paste it on the ** to try the temperature, if the film temperature after sun exposure is not very high, indicating that the thermal insulation rate is not bad.

3. Touch with your hands

**The film feels thick and smooth to the touch, while the inferior film feels thin and brittle, and is easy to wrinkle.

4. Film color

The pigment of the high-quality film is evenly integrated in the film, which is durable and not easy to change color, while the color of the inferior film is in the adhesive adhesive that acts as a bond, and the color falls off after tearing off the inner lining of the film with a fingernail.

5. Smell the smell

The residual solvent of the inferior film adhesive layer has a high content of benzene and a peculiar smell, you can tear off the protective layer of the film, and then smell the glue of the film to see if there is a peculiar smell.

6. Look at the bubbles

After tearing off the plastic lining of the car film, when it is re-laminated, the inferior film will blister, while the high-quality film will remain intact after lamination.

7. Look at the ultraviolet blocking rate

The car film should choose the ultraviolet anti-drying beam isolation rate is high, this is more important, the sun is very toxic in the summer, the people in the car are very uncomfortable by the sun, with the film film is much better, but some inferior film anti-ultraviolet effect is not good, in order to distinguish the blocking rate of anti-ultraviolet rays, you can put the film under the sun, see whether the film can look directly at the sun, if you can see a few seconds it would be good.

Car color-changing film is good. Automobile film can be simply divided into two categories, one is automotive glass film, which is pasted on the automotive glass to control sunlight. Its basic properties include safety, clarity, anti-glare, UV protection, heat insulation, scratch resistance, adequate shelf life and privacy protection.

The other type is the new car film product introduced by AAA company into the United States STI by AAA company, the basic performance includes personalized decoration, protection of car paint, and easy scrubbing.

Precautions. 1. Do not use fingernails or sharp objects to remove the edge of the membrane to avoid dirt entering; This is a scramble.

2. If there are bubbles, go to a professional car beauty maintenance shop within 24 hours to deal with them;

3. After the installation is completed, do not roll down the window within 3 or 5 days to prevent the edge of the film from rolling;

4. Do not put the adhesive label directly on the film;

5. Always have a microfiber wiping cloth with high adsorption capacity in the car for daily wiping.

According to China's laws and regulations, the light transmittance of the front glass shall not be less than 70%, and the light transmittance of the "triangular part" of the side window observation rearview mirror shall not be less than 70%.

It is only legal to meet this technical standard. Deeper is not better.

Color and quality have nothing to do with it.

The color of the car film does not have much effect on the thermal insulation performance, because the reason why the car film is insulated is mainly due to the thermal barrier layer, not the dyeing layer. It mainly reflects the heat carried by the sun through the thermal barrier layer, so as to prevent the heat from entering the car. Many dark car films circulating in the market are of inferior quality, sellers are blind car owners with good thermal insulation effect of dark car films, when buying car films, clarity is the most important, related to the safety of car owners. Since the front windshield is a window to observe the outside world, the clarity of the film is required to be extremely high. According to domestic traffic regulations, the light transmittance of the front windshield film should be more than 70%, while many films on the market at present have a light transmittance of only 65%, and some even only 50%.

Therefore, for the front windshield film, it must first be clear and safe, and then it is required to have the highest thermal insulation effect on this basis, which is a good solar film.

It is reported that after the urging and processing of Zhejiang Satellite TV, the ratings of the self-made drama "Love is a Little Blue", which was pirated on the Internet in the previous stage, began to rebound, and once ranked among the top three in the ratings list. With the deepening of the series, this urban emotional drama not only won a good reputation, but also set off a long drama craze among the audience. The play is personally directed by gold medal producer Ruan Qianzhi, and co-starred by stars from across the Taiwan Strait and three places, such as Yang Mingna, Tong Fan, and Dou Zhikong.

Popular actress Yang Mingna presented the audience with a wonderful performance of a love marathon in this 80-episode drama.

Yang Mingna is a powerful actress in Beijing Century Zhonghe film and television culture, and she has created countless roles familiar to the audience since her debut: there is the eccentric, icy and intelligent Ruonan in "The Legend of the Water Margin"; There are twin sisters Hua Sa Rong'er and Sa Lian'er with very different personalities in "Kangxi Weifu Private Interview"; Love is a little blue, and there are also the nine princesses who are beautiful and amorous and take care of the overall situation in "Qi Jiguang". Yang Mingna has created the image of many costume beauties, making countless audiences remember her gentle and handsome face.

However, in "Love is a Little Blue", Yang Mingna travels through time and space to become a beautiful and capable white-collar beauty in the modern city. In the new play, Yang Mingna staged a long and tortuous love marathon running scene for everyone.

Yang Mingna's character Lin Xiaolan and her boyfriend Guo Tao have been in love for more than ten years, but due to various reasons, the two have not entered the palace of marriage for a long time. In the end, they did not achieve positive results, but parted ways and started their own families. After a long love marathon, both of them lost.

Yang Mingna said that Xiaolan in the play mainly lost because she was too infatuated and paid too much for love.

Love is a little blue" set off a long drama fever Yang Mingna staged a love marathon "Love is a Little Blue" with strong ratings, and the protagonist Shen Tai is very popular.

Love is a little blue" set off a long drama fever Yang Mingna staged a love marathon "Love is a Little Blue" with strong ratings, and the protagonist Shen Tai is very popular.

Love is a Little Blue" has strong ratings, and the protagonist Shen Tai is very popular.

Love is a Little Blue" has strong ratings, and the protagonist Shen Tai is very popular.

Love is a Little Blue" has strong ratings, and the protagonist Shen Tai is very popular.

Love is a Little Blue" has strong ratings, and the protagonist Shen Tai is very popular.

It is true that the color of the car film has something to do with the bad color, but it is best to choose colorless or dark color.

Of course it matters· Choose the tasteless · Good texture · Contacts.

Of course, the film is a better maintenance choice, go to a professional car beauty shop to understand, 4S shop is not unique. A good film professional will explain it to you.

Look at the color, take it to the sun and open it, and the colored one is the dyed film.

The products of the car rough pin color change film include: transparent film, automotive electroplating film, pearlescent film, bright film, matte film, painted film, skin pattern film, brushed film, electroplating film, electro-optical metal film, matte metal film (referred to as matte ice film).

Color change films are mainly divided into two categories: domestic and imported. The domestic color change film is not as good as the imported color change film in terms of post-construction effect and durability. If you don't have a long-term color change demand, and you just want to change the color of the body to entertain yourself, then the cheapest domestic color change film is the best choice.

If you pursue the final effect and have a long-term demand for the color change film time, the most expensive imported color change film is more worth choosing.

Body color change film is a service that uses a film with rich colors and various colors to change the appearance of the whole car or part of the car in the way of overall coverage and pasting. The body color change film is mainly attached to the surface of the body through polymer polymer materials, which is easy to remove the seepage of the stool.

The benefits of the color change film on the body sticker.

1. Dynamic and fashionable. Reflect the difference between your car.

2. The color is free. Any color, change at will, combine texture at will, and replace the whole vehicle at will.

3. Convenient maintenance. As long as you wash the car often, there is no need to do paint beauty.

4. Protect the car paint. Scratch-resistant, no need to do paint beauty, seal the brilliance of the original car paint.

5. Change if you want. After removal, there is no residual gum, no adhesion residue, and no damage to the original car paint.

The brands of car body color change film include Avery body film, wheat truck body color change film, car clothes, Kavit, Nick; At present, the main subdivisions of color changing molds on the market are as follows: matte film, glossy shirt elimination film, electroplating film, carbon fiber film, permeable transparent film, etc.

1. The brands of car body color change hail and dust skin lack film include Avery body film, wheat truck body color change film, car clothes, Cavitt, Nick; 2. At present, the main subdivisions of the color mold on the market are as follows: matte film, bright film, electroplating film, carbon fiber film, transparent film, etc.

It is also known for body modifications, color changes, light alloy wheels, glass explosion-proof film and rotten interior modifications. Mansory's extraordinary technology for automotive color leakage film has won a leading position in the industry with its ingenuity, and is favored by the majority of consumers. Fourth product.

According to the "Technical Conditions for the Safety of Motor Vehicle Operation":

The visible light transmittance of the driver's view area of the front windshield and the part used by the driver to observe the exterior rearview mirror when driving should be greater than or equal to 70%. All windows should not be affixed with mirror-reflective sunshades.

Highway buses, tourist buses, buses with passenger standing areas, school buses and engines with a width to height ratio of less than or equal to all windows of all windows of Nana passenger cars should be greater than or equal to 50%, and in addition to the safety signs and information symbols for passenger cars in accordance with the provisions of GB30678, there should be no opaque and any mirror reflective material colored paper or heat insulation paper.