-
Decoration smashing wall things that should be paid attention to. Precautions for smashing the wall for decoration: The load-bearing wall cannot be smashed, which is absolutely not allowed.
Precautions for smashing the wall for decoration 2: When smashing the wall, you must pay attention to whether there are wires in the wall, and cut off the power supply first. Precautions for smashing the wall for decoration three:
Before smashing the wall, see if there is a pre-buried water pipe in the wall, if there is one, you want to plug it first, and then renovate it after smashing the wall. In general, first of all, it depends on what the structure of your house is, if it is a small brick, it is recommended not to move any walls, because they are all load-bearing walls. If it is a frame or frame cut, it is best to find KFS to ask for a structural diagram to see where there are columns and beams, one is for safety, and the other is to determine the plan, so as to save half of the structural columns or beams, and the previous efforts will be wasted.
In addition, the bathroom, kitchen and the eaves wall should not be smashed as much as possible, not only there are more structural columns and beams, but also involving thermal insulation, waterproofing, water and electricity routes, which is more troublesome to get wrong.
-
Knocking on the wall depends on what kind of house your developer is building, and the standards are all in it. If it is an empty frame structure of the house, as long as the earth wall and pillars do not move, there is no problem, if it is a semi-empty frame, it is divided into the main wall and a single wall, the main wall is not moving, you can open a single door to move, and there is no problem with a single wall.
Remember.
-
Smashing the wall depends on whether it is a load-bearing wall, and the load-bearing wall property is generally not allowed to be smashed, and it is still possible to open a door for the Kuang frame structure.
-
If you need to transform the internal layout of the house during the decoration, you often need to smash the wall and smash the original house wall. When smashing the wall, you also need to distinguish the wall, if it is a load-bearing wall, it cannot be smashed, how to identify the load-bearing wall?
1. What should I pay attention to when decorating and smashing walls?
1. Exterior wall: The exterior wall of the building includes the top surface and the ground.
2. Counterweight wall: Generally, there is a door and a window on the wall between the room and the balcony, and these doors and windows can be dismantled, but the wall below the window cannot be moved. This section of the wall is called a counterweight wall, and it acts like a weighing stone to provoke the balcony.
Demolition and alteration of this wall will reduce the bearing capacity of the balcony, causing the balcony to slowly fall.
3. Load-bearing wall: In general brick-concrete buildings, all prefabricated panel walls cannot be removed or opened doors and windows; Brick walls over 24 cm are also load-bearing walls. In addition, someone opens the door and window on the load-bearing wall, which will also destroy the load-bearing of the wall, and does not allow the problem of cleaning the cavity.
4. Beams and columns in the room: These beams and columns are used to support the upper floor, and the upper floor will fall down after being removed, and it cannot be moved.
5. The steel bar in the wall: the steel bar is the bone in the wall, if the steel bar is destroyed when the pipeline is buried, it will affect the bearing capacity of the wall and the floor. If it encounters **, the wall is also prone to breakage.
2. How to identify load-bearing walls?
1. Judge according to the drawings.
Load-bearing walls are marked on architectural drawings. In the construction drawings, the thick solid line part and the wall under the non-load-bearing beam in the ring beam structure are load-bearing walls. It generally appears as a solid black line in bold bold, and then it is the easiest way to distinguish a load-bearing wall from a normal wall.
2. Judging according to the thickness of the wall.
Generally speaking, the thickness of load-bearing walls is generally about 24 cm, and the thickness of non-load-bearing walls is about 10 cm. Moreover, the thickness of the load-bearing walls of the brick wall is 24 cm, while the thickness of the load-bearing wall of the concrete structure is 16 or 20 cm. The thickness of non-load-bearing walls varies in centimeters.
3. Judge by tapping on the wall.
We can also judge by the sound, only need to tap the shirt gently, when there is a crisp echo, it is a non-load-bearing wall, then there is not much echo is a load-bearing wall.
4. Judge according to the location.
Generally speaking, exterior walls and common walls with neighbors are load-bearing walls. The walls of the storeroom, bathroom, kitchen and hallway are non-load-bearing.
What should I pay attention to when decorating and smashing walls? Before decorating and smashing the wall, you should be able to pay attention to the sock beam clearly, and it is best not to blindly smash the wall, so as to avoid a lot of trouble or controversy. How to distinguish a load-bearing wall?
The load-bearing wall should be distinguished by a professional, and if you don't know how to distinguish it, don't blindly smash the wall.
Floor tiles play a very important role in people's room decoration, and the quality of decoration directly affects the overall aesthetics of the room. If the surface of the floor tile is uneven, the corners are missing, these will know that the quality of the floor tile itself is poor, belongs to the inferior product, if the surface layer of the floor tile is very bright, but there are inclusions in the glaze layer or the glaze layer freckles or the glaze color is different, this kind of floor tile is also a very poor quality, the quality is very poor, this is seriously unqualified, in our home decoration, need to be replaced. Check the quality of the floor tiles, we also need to see whether the inlay between the floor tiles is complete, whether there is a hollow drum in the middle, generally you can use a special hammer to gently knock on the floor tiles around and in the middle, if the sound is very crisp, it means that it is normal, but if there is a hollow drum sound, then the empty drum of the floor tiles must be removed and replaced. >>>More
Standards and specifications for the acceptance of building curtain walls: 1. The specifications and models of aluminum alloy profiles for concealed frame glass curtain walls must meet the design requirements and relevant national standards. The structural adhesive and weather-resistant adhesive used for concealed frame glass curtain wall must be compatible with the materials of the bonding and contact parts; Structural adhesives must be within the storage shelf life. >>>More
This country has a set of standards, for you to find the national wire rope national standards, there is an address, you can go to see! >>>More
Why do you have to smash walls and change water and electricity when you renovate a newly bought house? What is the reason? Because the original water and electricity location cannot meet the existing decoration requirements. For example, the size and position of furniture beds, or changes in the size and function of rooms, can affect where water and electricity are used. >>>More
In fact, after remodeling the house. New houses do not renovate water and electricity. In general, we smash the walls in the original decorative order, and change the water and electricity in two orders. >>>More