How to deal with the water treatment of wall tiles, and how to deal with the rainwater and dirt of e

Bathroom wall tile water quality removal method: 1, due to the stains splashed on the wall due to bathing, use a damp cloth dipped in laundry detergent, soda noodles, cornmeal, etc., choose one of them to wipe, and then wipe it clean with water. 2. Rust stains on the ground, with rubber gloves dipped in steel wool balls and rubbed with toilet cleaner and oxalic acid.

3. For paint stains, first scrape off the paint with a wallpaper knife and then wipe it with laundry detergent. 4. For more than one meter, first use a rag dipped in warm laundry detergent water and scrub it again. Dip a rag in water and scrub again.

Scrub first and then down. 5. Below one meter, scrub with a cleaning ball dipped in dry laundry detergent first. Dip a rag in water and scrub again.

There are two types of water treatment (stains) on the wall tiles.

First, there is water intrusion behind the wall tiles, which is very troublesome, you must carefully look for the leakage point, maybe the upstairs waterproofing is not done, after repairing the leakage point, there will naturally be no water stains, and the water on the back can show water stains on the bricks, indicating that your bricks are not all-porcelain or the bricks have cracks.

Second, the water stains caused by external water, but also can be leakage or steam condensation, this is much simpler, repair and wipe it, wipe it with 10% oxalic acid if it is not clean.

3. A small secret recipe for waterproof stains, rub a few times with a candle on the tile, and then polish it with a coarse cloth, the smoother the polish, the better, so that the tile will not only be brighter as new but also difficult to produce water stains in the future.

Water seepage from the walls is a headache. So what to do?

First of all, find the reason: is it the exterior wall or the bathroom kitchen?

If there is a cement layer, it is best to clear the area, and then brush the waterproof, which can be bought in the general paint store, after the waterproofing is done, the ash is like a cement layer. If it is water seepage in the bathroom or kitchen, it should be that the water pipe is not done well, find out the water seepage pipe, repair the test without water seepage, and then restore the previous state.

Water leak next door. Reason: Generally, this kind of situation is next door to the toilet or shower room, because the water is often used, and the shower is used, and at the same time there is no waterproof or tiled tiling, resulting in water often drenched on the wall, and the general cement, lime, putty has the ability to absorb water. Therefore, when the water absorption reaches a certain amount, it will start to seep out on the other side of the wall.

Solution: If this is the case, it is easy to solve it at home, you only need to put water on the wall of the bathroom, or pave the tiles, and then pay attention to fill the gaps between the tiles, and spray a layer of waterproof spray before laying the tiles. If it's a neighbor's house, you need to communicate well.

After all, whether people are willing to work hard to redo and release water still needs to be communicated by yourself.

Leaking water pipes in the walls.

Cause: If you have water pipes buried in your walls, then you need to do a test to see if the water pipes in the wall are broken.

The test method for the upper water pipe is to close the sluice gate to stop the water use, and then observe the wall to see if there is any leakage, of course, this process takes a little longer, because after the sluice is closed, there is also a waiting time to observe.

The test method of the sewer pipe is relatively simple, just drain the water directly, and then observe the water seepage of the wall.

Solution: If the water pipe is broken, it needs to be replaced as soon as possible to prevent corrosion of the entire wall after a long time. However, it will be more troublesome to change the water pipe, and the wall needs to be planed, so it is necessary to find the leakage point first, and when replacing the water pipe, it is also necessary to do a good job in sealing and protecting the water pipe joint to prevent the new water pipe from having problems at the joint.

Leaking water at the faucet connection.

Reason: If you have a faucet above the wall, then you can carefully observe whether the faucet is broken or the joint between the faucet and the water pipe is leaking, this is easier to detect, if you can't see it directly, you can touch it with your hands to see if there are water droplets, if you don't touch it at that time, you can also fold it into a long strip with a paper towel, wrap it around the faucet joint, and see if there are water stains on the paper towel after 1 minute.

Solution: The solution to this problem is relatively simple, just reinstall or replace the faucet. When reinstalling, you can wrap two layers of raw material tape around the joint of the faucet, remember not to wrap it too much, so that the part of the faucet screwed into the water pipe is reduced or not tight, and it is still easy to leak.

Peel off the tiles from the exterior walls, apply waterproof paint, and put the tiles back in. In addition, indicate the brand, specification, and expiration date of the waterproof coating. At the same time, take out the bricks in the corresponding leakage area of the house, fill the holes, and rebuild the bricks.

Apply some waterproof paint, the choice of waterproof paint is very important. Or renovate the floor, choose some floors with good waterproof performance, and find a good decoration worker to arrange the layout of the decoration floor reasonably.

The best solution to water seepage on brick walls is to re-reinforce and renovate. If you use the method of tinkering, there will be water seepage in the future, and you will do it again once and for all.

The rainwater dirt of the exterior wall tiles can be wiped with a general acidic detergent and then rinsed with clean water.

The general exterior wall tile rainwater dirt can be rinsed away with clean water; If there are many foreign objects and the adhesion is strong, you can brush them with an acidic detergent and then rinse them with water.

Acid cleaning agent is a liquid cleaning agent composed of surfactants such as high-efficiency acid detergent, wetting agent, defoamer, etc. Effectively remove rust, rust and other heavy scales on various hard surfaces without dilution, and stubborn rust needs to be soaked for a few minutes with a brush for better results.

1) Dispose of it with a toilet cleaner.

2) Mix the paraffin wax and white vinegar in equal amounts, put them in a bottle, and shake them before use. This solution is very effective for wiping tiles.

The tiles around the kitchen stove are often fried, fried, and fried'It is easy to get oily. To keep this place clean, you have to wash it frequently. When cleaning, you can spray all over with kitchen grease cleaning solution and wipe it off with a rag.

If there is dirt in the tile joints of the bathroom, spray some bathroom cleaner on the dirt, wait a while, brush lightly, and rinse with clean water. If there are any stains left, switch to laundry bleach and follow the above guidelines. If you want to wash the bathroom tiles to a level that is white and shiny, you can add a little ammonia to the soapy water.

The first thing is to see if the rust is on the surface of the tile or has penetrated it, if it is on the surface, you can use a rust remover: used for rust from the surface of tile, glass, PVC and plastic steel materials.

If it has already penetrated, you can use a rust remover: used to quickly remove rust from the surface of tiles, clear water tiles, terracotta products and natural stone.

The rusty metal compounds inside the bricks and natural stone are displaced, resulting in long-term protection.

If the tile wall is full of water, you should first make sure that the water source comes from. If it is water seepage on the exterior wall, you need to find a professional waterproofing company to deal with it. If it is an indoor cause, such as a leaking pipe, etc., the leaking pipe should be repaired as soon as possible and the water on the wall should be removed.

If there is too much water on the wall, you should first blot the excess water with a suction device or cloth. Then dry the wall with a clean cloth and try to keep it ventilated and dry. If there is still water that is not dry, you can use a fan or dehumidifier to dispose of the car.

If the situation is severe, a water pump can be used to pump the water out before proceeding with the above treatment.

Until the wall is completely dry, the sail is protected from any form of heavy pressure and vibration. If cracks start to appear in the tiles and plaster, then they need to be repaired. Depending on the type of tile and the damage situation, you can choose a professional repair tool or tile adhesive to repair it.

In general, dealing with tile walls full of water requires patience and care, and it is necessary to find the water source and treat it in time to avoid unnecessary losses.

Water stains on the wall surface of wall tiles are a relatively common phenomenon, and the main reason is that the wall surface is caused by moisture or water leakage. The existence of water stains not only affects the aesthetics of the wall, but also causes problems such as damp rot or mold germination of the wall, so it is necessary to clean up the water stains in time to avoid affecting the quality of the wall. So, what should I do if there are water stains on the wall tiles?

Here are a few common ways to remove water stains:

1.Wash with detergent. The first option is to use a cleaner to clean the wall. You can choose a professional detergent or a regular detergent, dilute it, and use gauze or sponge to clean it evenly. Rinse well with clean water.

2.Use lime water to remove stains. Add the lime to the water and stir, after the lime in the water settles, pour the upper layer of water into the container, smear the lime water on the wall, let it stand for a few hours, and then rinse the wall with clean water.

3.Wash with white vinegar. Mix the white vinegar and water in a ratio of 1:1, then dip the base slip with a cotton cloth, gently wipe the wall, and then rinse it with water after drying.

4.Use baking soda to clean. Add an appropriate amount of water to baking soda, stir well, apply it to the wall, let it stand for a while, and then rinse it with water. Baking soda can not only remove water stains, but also neutralize odors, and the cleaning effect is obvious.

5.Water-repellent treatment. In order to avoid the recurrence of water stains, you can choose to waterproof the wall. The waterproofing material can be a professional waterproofing agent, or it can be asphalt, paste and other materials. The treatment method can be carried out according to the product instructions, and generally needs to be applied 2-3 times.

In short, there are many ways to remove water stains on the wall, and it is necessary to choose the appropriate method according to the specific situation. As for how to avoid water stains, you can usually pay attention to keeping the room dry and ventilated, pay attention to preventing water leakage when using water sources, and do a good job of waterproofing the wall.