Can the air conditioner be transported flat in the trunk of a car?

No. If the outdoor unit of the air conditioner is placed lying down, during transportation, the air conditioner compressor.

The shaking amplitude will be very large, and the shaking process will cause serious deformation and even fracture of the suction and exhaust copper pipe connected to the compressor, resulting in damage to the air conditioner.

In addition, there is an "up" indicator icon on the box of the outdoor unit of the air conditioner, which cannot be reclined.

Precautions for air conditioner handling.

1. The indoor unit of the air conditioner should not be drenched in rain and water to prevent leakage and collision.

2. Before the air conditioner is removed, the Freon should be put away to avoid the lack of fluoride in the air conditioner.

3. In order to keep the nozzle clean and prevent dust from entering, it is best to seal the nozzle with adhesive tape. Note: Air conditioners are most afraid of water, dust, and air.

4. Do not flatten the removed connecting pipe to avoid causing the pipeline of the air-conditioning and refrigeration system to be unblocked. At the same time, remove the connecting pipe and make the interfaces and joints not collide, so as not to cause fluorine leakage in the air-conditioning and refrigeration system.

5. It is best to have an inclination of less than 45 degrees during the handling of the air conditioner, in order to prevent the compressor oil from entering the pipeline and causing high-pressure ice blockage, so the outdoor unit must be flat, not tilted or fallen.

First of all, try not to lay the air conditioner flat or upside down, as this will cause the lubricating oil in the compressor to pour back into the system and other mechanical failures.

The air conditioner is not allowed to be placed flat during transportation. The compressor inside the outdoor unit of the air conditioner is very heavy, and if it is placed flat during transportation, the fixed iron plate of the compressor at the bottom will be deformed due to vibration, and the pipes connecting the compressor will also be damaged at the same time as the refrigerator.

1. Air conditioning is a kind of household appliance used for cooling and heating. It can be said that it can be seen everywhere in life, and the use of air conditioning brings us a comfortable and healthy indoor temperature. In the composition structure of air conditioning, the outdoor unit of air conditioning is an indispensable part of it, and it can be said that the outdoor unit of air conditioning directly determines the work of air conditioning.

2. The two working principles of cooling and heating of the outdoor mechanism of the air conditioner:

During air conditioning and refrigeration, the high-pressure outlet of the compressor passes through the four-way valve 1-2 to the heat exchanger for heat exchange, so that the superheated steam gradually becomes saturated steam, and then becomes saturated liquid or subcooled liquid. The refrigerant liquid after throttling and depressurizing through the capillary tube is transferred to the shut-off valve of the outdoor unit and then enters the heat exchanger (evaporator) of the indoor unit, and is refrigerated by absorbing heat from the surrounding medium and evaporating into gas. In the evaporation process, the temperature and pressure of the refrigerant remain unchanged, and the refrigerant coming out of the evaporator has become dry saturated steam or superheated steam with a slight overheat, and the substance must absorb heat when it changes from liquid to gaseous state, which is air conditioning refrigeration.

When the indoor unit returns air, the return air pipe enters the muffler through the shut-off valve to the outdoor unit, and completes the refrigeration cycle through the four-way valve 4-3 to the low-pressure return side of the compressor.

The opening and closing state of the four-way valve during heating is exactly the opposite of that during refrigeration, and the sequence of flow is: the high-pressure outlet of the compressor passes through the four-way valve 1-4 to the silencer and then to the shut-off valve, and then enters the heat exchanger of the indoor unit, and passes through the four-way valve 2-3 to the reservoir to the low-pressure side of the compressor, so as to realize the heating cycle. The outdoor temperature sensor of the outdoor unit is mainly used to detect the outdoor ambient temperature, it detects the pipe temperature of the heat exchanger when cooling and heating, and if the temperature rises abnormally, the pipe pressure can be calculated, and then the abnormal temperature signal is sent to the control board.

It's fine, it won't make a difference.

The new air conditioner has not been used. The car can't be put down during transportation. Is it okay for me to lay the outside unit down?

No. If the outdoor unit of the air conditioner is carried and transported lying down, the shaking amplitude of the air conditioning compressor will be greatly increased, which will directly lead to serious deformation, bending, and even fracture of the suction and exhaust copper pipeline connected to the compressor. The external unit of the air conditioner will be placed flat, the vibration noise will be very large, and the lubricating oil in the compressor will flow into the pipeline, resulting in poor lubrication, and even burning the compressor, and also affect the ventilation and heat dissipation effect of the heat exchanger of the indoor unit.

The refrigerator compressor has regulations that cannot be tilted more than 45 degrees, and the new air conditioner needs to be placed for 24 hours when it is bought, because the compressor is bumpy during transportation, and it needs to be allowed to stand for 24 hours to return the compressor oil to its place before it can be used normally.

Summary. Hello, glad to answer for you, I don't think it's okay for your question above.

As long as the outdoor unit of the air conditioner is placed normally, do not put it upside down, and do not place it upside down, and do not bump too much during transportation. If the outdoor unit of the air conditioner is lying down or upside down, it is easy to deform or even break the suction and exhaust pipes connected to the compressor due to bumps during transportation, resulting in damage to the air conditioner.

Can the outdoor unit of an air conditioner be transported in storage?

This question is up to me, it takes a little time to type, so please be patient.

Hello, glad to answer for you, I don't think it's okay for your question above. As long as the outdoor unit of the air conditioner is placed normally, do not put it upside down, and do not place it upside down, and do not bump too much during transportation. If the outdoor unit of the air conditioner is lying down or upside down, it is easy to deform or even break the suction and exhaust pipes connected to the compressor due to bumps during transportation, resulting in damage to the air conditioner.

Do you want your air conditioner to sit flat on the roof or at the bottom of the car?

Squared vertical is not a problem. The key is that if you put the roof of the car, you have to protect yourself from rain and impact during these 25 hours or so.

In other words, the packaging of your air conditioner needs to be waterproof enough and resistant to a certain amount of impact (such as small pebble impact).

Have a nice trip!

1. Private cars are not recommended to be equipped with air conditioning units, if they really need to be carried, it is recommended to place them according to the following methods, 2. First measure the size of the air conditioning units that need to be carried, if they can be placed in the trunk, it is recommended to place them in the trunk of the car, 3. If they cannot be placed in the trunk, they can be placed in the rear seat from the rear side door, and it is recommended that they can be placed in the back seat, 4. If the first two places can not be placed, you can only ask the truck to help carry it.

It cannot be laid flat;

If this kind of long-distance bus is flat on the outdoor unit of the air conditioner for a long time, it is prone to several types of problems:

1. The sheet metal shell of the outdoor unit of the air conditioner is seriously deformed;

2. The internal copper pipeline is broken and deformed;

3. The compressor is faulty.

The air conditioner can be placed in a normal state and properly fixed with a telescopic rope.

Put it vertically, do not lie down, oblique or stand upside down, otherwise it will cause the compressor refrigeration oil to remain in the system and cause oil blockage. Cannot be laid flat. Can be placed in the cargo compartment.

It cannot be reclined. The air conditioner's outdoor unit has an "up" icon on the box. Upwards are placed squarely.

Four Cycle Processes of Automobile Air Conditioning:

1. Compression process: The compressor sucks in the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator, compresses it into high-temperature and high-pressure gas and discharges it out of the compressor.

2. Heat dissipation process: the superheated refrigerant gas at high temperature and high pressure enters the condenser, and due to the decrease of pressure and temperature, the refrigerant gas condenses into liquid and discharges a large amount of heat.

3. Throttling process: The volume of the refrigerant liquid with higher temperature and pressure becomes larger after passing through the expansion device, and the pressure and temperature drop sharply, and the expansion device is discharged in the form of mist (fine droplets).

4. Endothermic process: the mist refrigerant liquid enters the evaporator, so the boiling point of the refrigerant is much lower than the temperature in the evaporator, so the refrigerant liquid evaporates into gas. During the evaporation process, a large amount of surrounding heat is absorbed, and then the refrigerant vapor at low temperature and low pressure enters the compressor.

This process is repeated to reduce the temperature of the air around the evaporator.

It is not recommended for private cars to be equipped with air conditioning units, if they really need to be carried, it is recommended to place them as follows:

1. First measure the size of the air conditioner that needs to be carried, if it can be placed in the trunk, it is recommended to place it in the trunk of the car.

2. If it can't be placed in the trunk, you can put it into the rear seat from the rear side door, and it is recommended to place it on the back seat.

3. If the first two places are unable to place, you can only ask the truck to help carry it.

Air conditioning can be carried in the trunk. The trunk size varies from model to model. Generally, the trunk of a mid-size car can be equipped with air conditioning.

Moreover, the outdoor unit of the air conditioner is not allowed to be placed flat during transportation, because the clump skin or compressor inside the outdoor unit of the air conditioner is very heavy. If it is placed flat during transportation, the fixed iron plate of the compressor at the bottom will be deformed due to vibration, and the pipe connecting the compressor will also be damaged during transportation, resulting in damage to the outdoor unit of the air conditioner.

Precautions in the transportation of outdoor units:

When transporting the outdoor air conditioner, the outdoor air conditioner should be placed normally, not upside down or upside down, and the transportation process should not be too bumpy. If the outdoor unit of the air conditioner is lying flat or upside down, then the suction and exhaust pipes connected to the compressor during transportation will deform or even break, thus damaging the air conditioner.

The indoor unit of the air conditioner should not be exposed to rain or water to prevent electricity leakage. Before the air conditioner is removed, the freon should be put away to avoid the lack of fluoride in the air conditioner. In order to keep the nozzle clean and prevent dust from entering, it is best to seal the nozzle with tape.

Do not flatten the removed connecting pipes to avoid clogging the pipes of the air conditioning and refrigeration system. The inclination angle should be less than 45 degrees during the air conditioning process to prevent the compressor oil from entering the pipeline and causing high-pressure ice blockage. Millions of car purchase subsidies.