How do you remove the back seat of a car? How did the rear seats be removed

The disassembly of the rear seat of the car is divided into the disassembly of the rear seat and the disassembly of the rear backrest, the rear seat is only locked by the lock, but the rear backrest needs to unscrew the fixing screw of the folding page for disassembly, and the specific operation steps are as follows:

1. Open the rear door of the car.

2. Pull up the lock position of the rear seat to remove the rear seat.

3. Pull the unlock switch on the rear backrest.

4. Pull to put down the rear backrest.

5. Open the trunk of the car.

6. Unscrew the fixing screws of the folding sheet to complete the disassembly.

On both sides of the head of the rear seat, near the window, there will be handles, pull the handle, the backrest of the rear seat can be turned forward, and most of the cushion parts of the rear seat are squeezed directly to the rear of the car, and then lifted up to come out.

Electric rear seat adjustment means that the backrest angle of the rear seat or the forward and backward movement of the seat can be adjusted by the motor, and the electric adjustment of the rear seat is generally equipped in luxury cars.

To remove the recoil, remove the cushion first. to be able to remove the backrest. There are two clips for removing the cushion.

The seats of the two clips can be seen on the left side of the rear row and the lower leg of the passenger on the right side of the back row. After the two clips are pulled, the hand grabs the front of the seat and lifts it up. Remove the backrest and you can see the screws.

Complete. Let's try it out.

Find the two sides of the head of the rear seat, pull the wrench, and install it in reverse order.

Find the wrenches on both sides of the head of the rear seat, close to the window, pull the wrench, the backrest of the rear seat can be flipped forward, and the seat cushion can be removed by lifting the rear seat up, and it can be installed in reverse order.

In order to have more room to operate, the position of the front seat should be moved forward, preferably with the buckle that will open and secure the headrest cover of the seat, and the headrest and headrest cover should be removed.

On either side of the head of the rear seats, near the window, there will be a handle, pull the handle,The rear seat backs can be tilted forward, and most of the rear seat cushions are directly against the back of the rear seats The car squeezes the seat cushion and then lifts it up.

Electric rear seat adjustment means that the angle of the backrest of the rear seat or the forward and backward movement of the seat can be adjusted by the motor. Electric adjustment of the rear seats is generally available in luxury cars.

Leather of the seats.

Yellow cowhide, also known as Grade A leather, is the most commonly used material for all automotive leather seats. The surface is delicate and soft, and pores are barely visible. The texture is sturdy and very tough, so the seated after processing is very beautiful.

Buffalo leather is also known as class B leather. Compared to yellow leather, it has the advantage of being strong and wear-resistant. The disadvantages are not soft enough, poor hand feel, poor toughness, rough surface, and obvious pores. Compared to yellow leather, the finished seat has a slightly worse appearance.

In addition to the above two types of leather, there is often a type of C-grade leather that can be seen in the market, that is, the two-layer leather of cow and buffalo.

Compared with Grade A leather and Grade B leather, Grade C leather is very different in terms of quality, beauty, quality and service life. Therefore, it is not recommended for customers to use leather-processed seats below grade B.

In general, on both sides of the head of the rear seats, near the window, there are handles that pull the handles, and the backrests of the rear seats can be flipped forward.

Most of the cushions in the rear seats are squeezed directly to the rear of the car, and then lifted up to come out, you can try it.

The disassembly of the rear seat of the car is divided into the disassembly of the rear seat and the disassembly of the rear backrest, the rear seat is only locked by the lock, but the rear backrest needs to unscrew the fixing screw of the folding page for disassembly, and the specific operation steps are as follows:

1. Open the rear door of the car.

2. Pull up the lock position of the rear seat to remove the rear seat.

3. Pull the unlock switch on the rear backrest.

4. Pull to put down the rear backrest.

5. Open the trunk of the car.

6. Unscrew the fixing screws of the folding sheet to complete the disassembly.

How to disassemble the rear seats of the car, this thing is very easy to do, you drive the car to the repair shop, and the master will remove it for you.

Just lift the seat directly (with a bit of effort), and then you can see the 3 screws, and the back is removed when you unscrew it.

The rear seats are uneven when they are folded down? The seat removal tutorial is coming, a necessary skill for bed and car self-driving travel.

It is very simple to remove and replace the rear seat cushion, and when installing the rear seat cushion, you need to remove the sitting part of the rear seat and attach the seat cushion. When it comes to installing the backrest part of the cushion, it's quite simple, just fix it properly. The backrest part of the seat cushion does not need to be removed from the backrest of the rear seats.

The steps to disassemble and assemble the car seat are as follows:

1. Generally, the front seat slideway is placed last, and the front two screws can be removed, and then the slideway is slid to the front and the back two screws can be removed;

2. Remove the airbag line, the safety belt alarm line is on the line, the rear row is to remove the seat cushion first, generally the seat can be lifted up, you can remove the two buckles, while pressing back, you can remove the seat cushion while lifting it up;

3. If the backrest is removed, you need to put down the back backrest and then take a screwdriver against the rotating shaft to disassemble it.

1.Prepare the tools.

Before you start disassembling the back seat of your car, you need to have the appropriate tools ready. Typically, you'll need basic tools such as screwdrivers, wrenches, shears and wire hooks, as well as some commonly used car removal tools.

2.Remove the seat cushion.

The first thing that needs to be removed is the seat cushion, which is usually connected to the base. Use a tool to remove the screws holding the seat cushion in place and remove it. Then gently remove the attachment point between the seat cushion and the base by hand to detach it.

3.Remove the base.

The next thing that needs to be disassembled is the base, which needs to be lifted to make it easy to operate, as the base is usually connected to the floor floor. Use a tool to remove the screws that hold the base in place, and then let the bottom Qizhou seat come out naturally.

4.Remove the backrest.

Once the seat cushion and base have been removed, the backrest can be removed. The backrest usually consists of large and small attachment points that require the use of different tools to remove them. Use a tool such as a wrench to remove the fixing points on the backrest until the backrest is completely detached.

5.Security precautions.

Special attention needs to be paid to safety when disassembling the rear seat of a car. First of all, protective measures need to be taken to prevent accidental injury. Secondly, be especially cautious during the disassembly process, follow the disassembly process, ensure that each step is very stable, and do not forcibly disassemble to avoid damage.

Finally, be sure to carefully inspect each fixing point after disassembly to ensure that the installation is correct, safe and secure.

Summary. Although it is not difficult to remove the back seat of a car, it requires certain disassembly skills and basic car knowledge. In the process of operation, it is necessary to pay attention to safety, prevent damage, and follow the correct operation process to ensure the successful disassembly and not affect the subsequent use.