How to remove the rear seats of Skoda Xinrui?

The steps are as follows: 1. After finding the buckle position of the left and right sides of the back cushion, grab the front and bottom parts of the cushion with your hand, and pull it up hard. 2. Unscrew the two screws at the bottom of the back backrest.

3. Untie the plastic parts at the plug pillow above the backrest from the cloth eye like unbuttoning.

This needs to be disassembled with professional disassembly tools, or sent to a professional modification agency.

If the seat cushion is single-folded, you can hold the front and side with your hands, and pull flexibly and firmly at an angle of 45 degrees to the outside and upward, so that the buckle will automatically come out. Pull one end out and then pull off the other end in the same way as the other end. Note that brute force cannot be used if you can't pull it, just shake it up and down a few times, otherwise, it will be troublesome to pull off the buckle.

If you fold the backrest, you need to fold the seat cushion first, and you can see that there are three fixed screwing nails, and you can remove the screwing with a screwing knife.

Profile of Skoda Xinrui:

Skoda Xinrui is an A-class sedan developed by SAIC Volkswagen based on the PQ25 platform, which is also the first time that Volkswagen has developed an A-class car based on the A0-class platform. Developed at the same time as RAPID, there are also new Jetta and new Santana that have already been unveiled.

Volkswagen's move is to compete for the market for entry-level family sedans, that is, the market controlled by models such as the Excelle and Elantra. As a Skoda version for young people, Rapid is expected to do a better job than the other two Volkswagen brothers in terms of cost performance.

Rear seat removal is simple.

First go to the corner of the back seat, grab one corner of the cushion with your hand, lift it up hard, and you will hear a click, and you can see the buckle that has been lifted. The other horn can also be lifted up. Don't be afraid of breaking it, just use force, and the two corners will be buckled.

1. First find and press the wheel retarding button under the rear seat of the SAIC Skoda Xinrui vehicle.

2. After pressing the button, you can see the fixing screws of the rear seats of the SAIC Skoda Xinrui vehicle, and you can remove the fixing screws.

3. After removing the fixing screws of the rear seat of the SAIC Skoda Xinrui vehicle, you can remove the cushion of the rear seat of the vehicle.

4. Next, remove the fixing screws of the rear seat backrest of the SAIC Skoda Lawu Xinrui vehicle to remove the backrest of the seat.

5. Finally, the rear seat of SAIC Skoda Xinrui vehicle was completely disassembled.

Summary. Hello, the removal method of the rear cushion of the car is: 1. Disassemble the buckle at the headrest rod of the car; 2. Remove and fix the screws on the right side of the rear cushion; 3. Remove and fix the screws in the middle of the rear cushions; 4. Remove and fix the screws on the left side of the rear cushion; 5. After the screw is disassembled, grab the bottom of the rear cushion with your hand, and gently lift it up to remove the bottom of the rear cushion; 6. Grab the upper part with your hand and gently break it outwards to remove the top of the rear cushion.

The functions of the rear cushion are: 1. Enhance the sitting feeling and increase comfort; 2. Protect the seat. The rear cushions are made of the following materials:

Genuine leather, microfiber leather, artificial leather, nylon, chemical fiber, artificial wool, polyester wool.

Hello, the removal method of the rear cushion of the car is: 1. Disassemble the buckle at the headrest rod of the car; 2. Remove and fix the screws on the right side of the rear cushion; 3. Remove and fix the screws in the middle of the rear cushions; 4. Remove and fix the screws on the left side of the rear row cushion; 5. After the screw is disassembled, grab the bottom of the rear cushion with your hand, and gently lift it up to remove the bottom of the rear cushion; 6. Grab the upper part with your hand and gently break it outward, you can remove the Zhaohuxiang above the rear cushion. The function of the rear cushion is to make a cavity:

1. Enhance the sitting feeling and increase comfort; 2. Protect the seat. The materials of the rear cushions are: leather, microfiber leather, artificial leather, nylon, chemical fiber, artificial wool, polyester wool.

I hope it can help you, I hope you can give a thumbs up, thank you for your support and trust, thank you.

1. First of all, take out the rear seat cover of the Skoyu Heda Octavia.

2. Put the Skoda Octavia rear seat cover chuck away.

3. Remove the cushion of the rear seat of the Skoda Octavia below.

4. Put the rear seat cover of the Skoda Octavia into it.

5. Fasten the buckle of the rear seat cover of the Skoda Octavia.

6. Adjust the Skoda Octavia rear seat cushion.

7. Install the Skoda Octavia Celebration chair in the back seat.

8. The following is ready to insert the armrest of the Skoda Octavia rear seat.

9. When the armrests of the Skoda Octavia rear seat state forest chair are pushed into an oblique angle, they are then inserted.

10. After installation, push back the rear seat armrest of the Skoda Octavia.

11. Skoda Octavia rear seat seat cover backrest buckle.

12. Finally, the rear seat cover of the Skoda Octavia is installed.

Octavia rear seat disassembly: the rear seat cushion is lifted up hard, exit the cards on the left and right sides, with disturbance Xiang and then push back with some force, the bottom of the rear is 2 hook buckles, take it off, the key is to install it back, remove it to understand the structure of the cushion, when installing it back, after the hook is good, you must be leisurely when pressing down, the strength is great, and it is easy to damage the card seat.

After pressing down firmly on the cushion, and then pushing it in the direction of the backrest, it can be removed; When installing, first hang the hook behind the cushion and press it back and then down, and when you hear a click, it means that the buckle has been buckled. Just take it off and look at the buckle to understand how it was installed. Very simple!

In the back row, there are 2 hooks that will be disengaged, and then the hand reaches in and touches one of the hooks on the side, first press down the seat cushion and then push it in to come out.

1. First of all, take out the rear seat cover of the Skoda Octavia and put it in.

2. Put the Skoda Octavia rear seat cover chuck away.

3. Remove the cushion of the rear seat of the Skoda Octavia below.

4. Put the rear seat cover of the Skoda Octavia into it.

5. Fasten the buckle of the rear seat cover of the Skoda Octavia.

6. Adjust the Skoda Octavia rear seat cushion.

7. Install the rear seat of the Skoda Octavia.

8. The following is ready to insert the armrest of the Skoda Octavia rear seat.

9. Skoda Octavia rear seat armrest is pushed into an oblique angle and then inserted.

10. After installation, push back the rear seat armrest of the Skoda Octavia.

11. Skoda Octavia rear seat seat cover backrest buckle.

12. Finally, the rear seat cover of the Skoda Octavia is installed.

Remove both sides first. Press down on top with one hand and pull the middle with the other. In the middle, there is a red button on each side and press and then forward bai.

I also encountered this problem, and I was going to change it this evening, but I didn't change it. Last time, I bought a seat cover at the car supplies market, and I was damaged by a buckle during the installation of the seat cover, which scared Ya at the time. After going to the 4S store to replace, it seems to have cost less than 2 yuan.

Unfortunately, the dismantling process was not inspected on site at that time. I asked someone today and said that there might be a mechanism in the trunk that can be pulled out, but because it was dark, I couldn't see it, so I stopped. Prepare to change tomorrow.

Go to a car wash and see it yourself, ask them to help, and you'll be able to get it down. What I learned when I pressed the winter mat wasn't very difficult, and there were a few small iron clips in the back, and I lifted it, and then pressed the red buttons on both sides of the top of the back row, and it shouldn't be a big problem!!

There's something like a latch in there, and you can open it with a push, and you can't get it, so you can go to SSSS and ask them to help.