After the toilet is filled, the water tank still has the sound of the horse, but it does not leak?

As long as there is a sizzling sound, it is still slowly entering the water, only the sound stops, it can be non-stop will leak, after a while after the drainage, it is better to replace it with a new one.

After the toilet is filled with water, there is still a sound, not necessarily a leak, if there is a leak, you can see that there is water leaking out of the toilet.

If it is like this for a long time or all the time, it is that the valve is not tight, causing water leakage, if it does not ring after a period of time, it is normal.

This is the sound of water on the toilet, at the beginning of the large amount of water, and when the amount of water is about the same, the amount of water will slowly become smaller, knowing that the water tank does not have a float to block the water channel, there is no sound.

There is a sound of running water in the toilet, generally there is a problem with the water tank, open the water tank lid and check it according to the following steps:

1. Whether there is water in the water tank, if there is no water, press the drain valve button lightly, check whether the drain valve has fallen, the water level of the water tank rises with the water inlet valve, and the sound of flowing water disappears; If water is still flowing into the toilet, the drain valve gasket is damaged.

Solution: The drain valve body needs to be replaced.

2. Whether the water level is higher than the overflow pipe and flows down from the overflow pipe.

Solution: Adjust the water level of the inlet valve to control the float and reduce the water level to the lower end of the overflow valve.

3.The float valve is not completely closed, there is a little gap, so there is a constant flow of water.

Solution: Replace the float valve.

Summary. 1. After the toilet tank is aged, there is usually a leakage of the toilet. If the leak is slight, it will be difficult to detect without looking closely, but it will keep ringing after a while.

The tank can be carefully inspected for damage. 2. The shut-off valve is broken, because the water can't be closed and flows out along the toilet, and the shut-off valve will always keep the water off. 3. The water balloon is not tightly sealed, resulting in water leakage and water level dropping.

The inlet valve then works to replenish the water. If the toilet is newly bought, you can directly ask the seller to replace the water balloon. If it's inconvenient, you can go to the building materials market and buy one for more than 20 yuan.

4. The water tank button is out of order, and the inability to rebound will also cause the toilet to be watered and drained non-stop. It is recommended to open the water tank lid to see if the button is stuck. If it is stuck, clean it up, if it is caused by the aging of the spring.

If the button fails, the button spring can be replaced.

There is no water in the toilet water, and there is a sound.

1. After the toilet tank is aged, there is usually a leakage of the toilet. If the leak is slight, it will be difficult to detect without looking closely, but it will keep ringing after a while. The tank can be carefully inspected for damage.

2. The shut-off valve is broken, because the water can't be closed and flows out along the toilet, and the shut-off valve will always keep the water off. 3. The water balloon is not tightly sealed, resulting in water leakage and water level dropping. The inlet valve then works to replenish the water.

If the toilet is newly bought, you can directly ask the seller to replace the water balloon. If it's inconvenient, you can go to the building materials market and buy one for more than 20 yuan. 4. The first box button of the water is out of order, and the inability to rebound will also cause the toilet to keep watering and draining.

It is recommended to open the water tank cover to see if the button is stuck in the car. If it is stuck, clean it up, if it is caused by spring aging. If the button fails, the button spring can be replaced.

1. There is a silicone sealed shirt ring at the bottom of the toilet tank, which has a long service life and is easy to leak. Simply replace the sealing remnant. 2. There is a problem with the drain switch of the toilet, the quality of the switch button is not good, it will not rebound after being pressed, and it has been in a drain state.

3. The inlet valve behind the toilet is faulty and causes water leakage. It's a matter of quality and age, just replace the switch or valve.

It leaks inside the pipe, not outside. If you don't adjust it, it will be this sound for a long time.

Solution: Open the top lid and bend the arm bar of the rubber cover to the middle (on top of the rubber cover), as far as possible, and generally it is fine.

This situation (the sound of water ingress) may also be caused by the water balloon is not tightly sealed, resulting in water leakage, water level drops, and then the water inlet valve works to replenish water, and the water ball can be directly replaced to solve.

Open the lid of the water tank, close the tap water cut-off door, remove the float to see if there is water inside, and take down the water gate control valve to clean.

The reason why the toilet tank keeps ringing, but the toilet bowl is not leaking, is because the shut-off valve is damaged.

The shut-off valve was damaged, and since the water could not be turned off, the water flowed down the toilet, so the water valve was constantly filled. It may also be that the water ball is not sealed enough, there will be leakage, water level drop and continuous replenishment of the water supply valve.

Toilet tank repair tips

1. The first thing that needs to be done is to see if the toilet tank is damaged or damaged. If the tank is hit with a strong impact or a sharp object, and the surface of the toilet bowl is scratched, damaged, or cracked, it is definitely a leak problem, so a new toilet tank needs to be created.

2. After the inspection is completed, if it is confirmed that the outside of the toilet is intact, you can check whether there is a problem inside. Start by opening the toilet tank lid and observe the water level and float in the toilet tank.

If the water level in the toilet tank has reached its highest point, but there is still water in it, or the water has stopped running due to insufficient water level in the toilet tank, you should check for float problems. Previously, you could choose to replace and if there was a new floating part, you could lower the position of the floating part slightly.

3. After temporarily draining the water, you can check whether the sealing ring in the toilet tank is damaged, which may be the place of water leakage. First remove limescale and other dirt from the tank, remove the bottom sealing ring to clean it, if something goes wrong, replace it immediately, don't wait for it to break completely.

1. Check the water meter to see if there is any leakage.

2. Close the water valve and drain all the water, if it doesn't sound, it must be leaking.

3. You can adjust the float in the tank.

Fourth, the probability of leakage of the water tank plug is small.

There is always a sound of water in the flush toilet, but there is no leakage, what's going on?

Hello, I've seen your question, I'm sorting out the answer, please wait a while There is a water sound that is already leaking, but there is very little leakage, you can't feel it, it should be the 'leather cushion' is old, and try to solve it with a new one.

1. Check the water meter to see if there is any leakage.

2. Close the water valve and drain all the water, if it doesn't sound, it must be leaking.

3. You can adjust the float in the tank.

Fourth, the probability of leakage of the water tank plug is small.

If the water tank still has a sizzling sound after the toilet is finished, but it does not leak, it may be due to the following reasons:

1.Improper tank water level: Setting the water level in the tank too high or too low can cause sizzling sounds. It is necessary to check whether the water level in the water tank is within the normal range, and generally the upper part of the water tank should be equipped with a mark.

2.Failure of the water inlet pipe of the water tank: check whether the sewer or water inlet pipe is blocked by jujube or foreign objects. If there is, it may cause the water inlet to be unsmooth, and the water level in the water rock containing tank is not stable, which will lead to a sizzling sound.

3.Damage to the internal components of the water tank: The components inside the toilet tank may be damaged due to long-term use, such as the inlet valve and drain valve, etc., which may cause abnormal pressure inside the tank and the water level to shake, resulting in a sizzling sound.

If there is still a sizzling sound in the water tank after the toilet is finished, it is recommended to check the selling posture and explain the reason first. If you don't handle it properly on your own, it may cause more serious problems, and it is recommended to have a professional inspect and repair it.

The water shut-off valve is broken.

Because the water can't be closed and flows out of the toilet, the water valve will always be in a state of water.

It may also be because the water balloon is not tightly sealed, resulting in water leakage, water level drops, and then the water inlet valve works to replenish the water, if the toilet is newly bought, this situation can directly ask the seller to replace the water balloon.