How does light guide daylight capture sunlight? Where are spherical and flat plates suitable?

Updated on Financial 2024-07-13
13 answers
  1. Anonymous users2024-02-12

    To put it simply, the light is captured with a dome and transmitted to the room through a pipe. At present, the highest reflectivity can be reached by a foreign brand, and there is also a dealer called Xinriyuan in China.

    It is mainly used in single-storey buildings, the top floor of multi-storey buildings or basements. Home, office, lobby, corridor, storage room, washroom, leisure and entertainment place, public place, school, factory, airport, etc.

  2. Anonymous users2024-02-11

    Collect sunlight through the dome! The spherical type is suitable for the top floor or lawn, and the flat type is suitable for places such as squares!

  3. Anonymous users2024-02-10

    The light guide tube lighting is to collect outdoor natural visible light through the outdoor lighting device, and after the light guide tube is efficiently reflected and transmitted, the natural light is evenly scattered into the room after being distributed by the diffuser device at the bottom of the system, so as to collect sunlight, the spherical shape is suitable for the roof or lawn and other places, and the flat type is suitable for the square and the flat place.

  4. Anonymous users2024-02-09

    1. There are light collectors and light collectors in the lighting area; 2. Through the high reflectivity transmission area, the light can be collected to the area you want to reach. 3. Output area: Unique diffuser removes glare. Of course, Solato's recent diffuser might be even more subtle.

    In terms of the applicable occasions; Hemispheres are basically OK except for hard ground squares and water that are not very suitable;

    The flat plate is suitable for underground spaces, roads, squares and other areas with high ground requirements and smooth pedestrian traffic.

  5. Anonymous users2024-02-08

    Schonet light guide uses a light collector to capture light and transmit it to the room through the pipe, the spherical type is suitable for the top floor or green lawn, and the flat type is suitable for squares, etc.

  6. Anonymous users2024-02-07

    Sunite light guide tube daylighting.

  7. Anonymous users2024-02-06

    Ducted daylight lighting devices can be used in many scenes, generally like underground spaces, gymnasiums, school libraries, large factories, etc., basically can use this kind of ducted daylight lighting devices, general installation needs to consider the structure of the house, which direction to install, the height of the house, now the heart of the source of light guide can meet the multiple 90 degree turns, so this is not to worry.

  8. Anonymous users2024-02-05

    Pipeline daylight lighting system, also known as light guide lighting system, is currently the best in the country at present. The Eastview daylight harvesting system of Beijing Oriental Scenery New Energy Technology Co., Ltd. captures sunlight through the collection device on the roof, and then diverts it downward through reflective pipes to distribute natural light to the area inside the building through different reflective surfaces. The system basically does not involve energy consumption, and the concept of building energy efficiency is exhausted.

    Adjustable piping design to meet installation needs with minimal structural changes. Reflective mirrors and diffuse surfaces can be installed on the ceiling to adjust the light and control the propagation of light in the room. The light introduced is evenly projected into the room and keeps out harmful UV rays, excess heat and dust.

    The intelligent daylight harvesting system can be used in conjunction with the daily lighting system, which can provide light source at night or on cloudy days.

    By using a daylight harvesting system, the cost of electricity consumption will be greatly reduced. The system can be widely used in all indoor areas that need to be lit during the day, such as factories, offices, commercial shelters and homes.

    You can go to the company ** and have a look.

  9. Anonymous users2024-02-04

    The Light Guide Daylight System provides daytime lighting for the following locations:

    Public buildings: shopping malls, supermarkets, stadiums, exhibition halls, zoos, museums;

    Industrial buildings: large factories, warehouses, subway maintenance plants;

    Military facilities: hangars, maintenance hangars, equipment hangars, tunnels, etc.;

    Civil buildings: waiting halls, underground passages, subways, light rail waiting halls, schools, hospitals, ** office buildings, prisons, high-end clubs, hotels, hostels, mobile rooms, family residences, villas, etc.

    Residential: villas and community clubs, parking lots.

  10. Anonymous users2024-02-03

    Light guide lighting is known as tubular daylighting system in foreign countries, and the domestic standard is called light guide daylighting system.

    This is a non-electric lighting system in which buildings can be illuminated indoors using sunlight during the day. The basic principle is that the outdoor natural light is efficiently collected through the dome and imported into the system for redistribution, and then transmitted by the specially made light guide tube to evenly and efficiently irradiate the natural light to any place where the light is needed, from dawn to dusk, and even cloudy days, the light introduced into the room by the light guide daylight lighting system is still sufficient. The device consists of three main parts:

    Lighting device, light guide device, diffuser device.

    The core components of the system:

    Light guides. It is mainly used to transmit light. Using the colorful unlimited light guide tube with international patented technology, the primary reflectivity of the light has exceeded the physical limit of the reflectivity of 98%, which can transmit sunlight most effectively.

    Note: Compared with 98% of the light guide pipes, when the pipe length is 1 meter, the lighting efficiency difference is 13%, and when the pipe length is 3 meters, the difference is doubled.

    The patented light cap filters out 100% of ultraviolet rays, and the non-metallic film of the colorful limitless light guide does not conduct infrared rays, and the whole system only transmits 100% visible light. It is comfortable to use, can effectively prevent the destruction of indoor items by ultraviolet rays, and at the same time will not transmit solar heat radiation to the room, reduce the load of indoor air conditioning, and truly achieve energy saving in the building.

    Diffuser: Uses Frenier lens technology to evenly diffuse light into the room, so that the room can be bathed in soft natural light in the morning, evening and noon.

  11. Anonymous users2024-02-02

    A light pipe daylighting system is a non-electric lighting system in which buildings can use sunlight for indoor lighting during the day. The basic principle is that the outdoor natural light is efficiently collected through the dome and imported into the system for redistribution, and then transmitted by the specially made light guide tube to evenly and efficiently irradiate the natural light to any place where the light is needed, from dawn to dusk, and even cloudy days, the light introduced into the room by the light guide daylight lighting system is still sufficient.

    Light pipe lighting systems are mainly used in single-storey buildings, multi-storey buildings on the top floor or in basements. Home, office, lobby, corridor, storage room, toilet, leisure and entertainment places, public places, schools, factories, airports.

    Schunette light pipe lighting systems are of international "FM certified" quality***.

  12. Anonymous users2024-02-01

    The working principle of the light guide daylighting system is to collect sunlight through its outdoor lighting cover, introduce it into the system, and after the efficient transmission of the light guide, the diffuser evenly distributes the natural light to any place in the room where the light is needed. The system can collect direct light and scattered light from all angles in an all-round way to achieve high-quality lighting effect, which is more suitable for rainy days of haze machine. The top floor of your house can be installed, and if you install it in the basement, you must ensure that the installation location can collect sunlight.

    At present, there are many cases of sundome in China, and the ***** is relatively cheap.

  13. Anonymous users2024-01-31

    The principle of the light guide tube is to capture the light with a dome and transmit it to the room through the pipe. The Solatube Dome has a patented technology that collects low-angle light in the early morning and evening, reflecting off some of the overly strong light in the middle of the day. The transmission pipeline has a colorful unlimited patent, which can transmit light, and block infrared rays, and transmit the purest and no chromatic light.

    The diffuser is installed at ceiling height and looks like a luminaire that spreads light evenly throughout the room.

    The Solatube illumination area is as follows.

    160 ds:19㎡

    290ds:28㎡

    330ds /750ds: 50㎡

    m74ds : 70㎡

Related questions
14 answers2024-07-13

Optical fiber lighting: Optical fiber lamps are made of special polymer compounds as the core material, with high-strength transparent flame retardant engineering plastics as the outer skin, which can ensure that there will be no quality problems such as fracture and deformation for a long time, and the service life is at least 10 years. Due to the use of high-purity core material, the attenuation in light transmission is effectively reduced, and the efficient transmission of light is achieved, because it has high purity, low attenuation, and easy installation. >>>More

7 answers2024-07-13

No. Direct sunlight in the middle of the day can cause damage to the plants. It should be kept in a cool place. Regular nitrogen and potassium supplementation. Promotes the growth of plant rhizomes.

9 answers2024-07-13

The inside of the diode is a p-n junction, when the p-n junction is just energized, the electrons begin to move, forming an internal electric field, and the internal electric field force generated is in the opposite direction to the external electric field force, when the internal electric field force and the external electric field force reach equilibrium, the electrons will no longer move, and the internal electric field will no longer increase. When the diode is turned on, it acts like a wire.

11 answers2024-07-13

At present, there are two main ways to achieve energy saving in the entire lighting industry. >>>More

13 answers2024-07-13

A light guide is a device that uses optical fibers to transmit optical signals, which can transmit light from one place to another. A light guide typically consists of two end faces and one or more curved optical fibers, where one end is connected to a light source and the other end is connected to a place where illumination is required. The main advantages of the light guide tube are high transmission efficiency, low energy consumption, long service life, small size, light weight, Shengdan sunshine introduction lighting system is the sunshine introduction of bright product research and development, manufacturers, the company has always adhered to the "technology as the core, to promote low-carbon energy-saving products as its own responsibility" purpose, after years of technology precipitation and development, has become a high-tech enterprise in the field of building energy conservation with sunlight into the lighting system as the core of business, set service, research and development, production and sales. >>>More