What are the characteristics of the light tube in the tube?

A light guide is a device that uses optical fibers to transmit optical signals, which can transmit light from one place to another. A light guide typically consists of two end faces and one or more curved optical fibers, where one end is connected to a light source and the other end is connected to a place where illumination is required. The main advantages of the light guide tube are high transmission efficiency, low energy consumption, long service life, small size, light weight, Shengdan sunshine introduction lighting system is the sunshine introduction of bright product research and development, manufacturers, the company has always adhered to the "technology as the core, to promote low-carbon energy-saving products as its own responsibility" purpose, after years of technology precipitation and development, has become a high-tech enterprise in the field of building energy conservation with sunlight into the lighting system as the core of business, set service, research and development, production and sales.

As the main solar sunlight introduction lighting in China....

1: The middle tube of the light tube adopts the most advanced and reasonable split structure, and the lamp or ballast can be replaced at any time, and the after-sales service cost is low.

2: The pipe line in the light tube adopts an integrated line, and there are various protection functions inside the integrated line, mainly including: short circuit, open circuit, abnormal lamp, lamp leakage, high voltage, low voltage, overcurrent, undercurrent, etc.

It can effectively protect the lamp and ballast from burning out.

3: The light tube adopts an integrated circuit in the tube, and the inductance with a relatively high temperature is dried at the other end of the lamp, which not only reduces the temperature of the ballast itself, effectively protects the normal working environment of other electronic components, but also makes the whole ballast circuit arrangement more reasonable, greatly reduces the working space of the rectifier circuit board, and increases the luminous length of the lamp to a greater extent.

4: The light tube in the tube directly adopts the standard national standard T5 lamp, which can be bought everywhere on the market, and is much cheaper than non-lamps, customers need lamps with different color temperatures, and they can be replaced at any time according to their own requirements.

5: Flame retardant and high temperature resistant ABS fireproof material plastic parts, which can withstand high temperature of 200C degrees, and is safer and more reliable to use.

6: The use of high borosilicate glass tube (commonly known as: explosion-proof tube) has a more beautiful appearance and a light transmittance of more than 95%.

7: The light tube in the light tube is really more efficient than the trichromatic T5 fluorescent light in 88lm w-95lm w, and the brightness is higher.

The light pipe, also known as the light guide tube, the light guide tube, the more formal name is the ducted daylight lighting device, daylight lighting system, etc., is a device that uses the light pipe to introduce outdoor natural light into the room. It is also equipped with a lighting device and a diffuser device. The use of light pipes for natural lighting is a relatively common concept in modern green buildings.

It can be widely used in underground spaces, corridors, offices, workshops, workshops, venues and other places that need to be turned on during the day.

As an important part of the daylight lighting system, the reflectivity of the light pipe and the diameter of the light pipe are directly related to the brightness of the whole daylight lighting system.

The reflectivity of the general light pipe can reach 95%, and the diameter is 250mm, 330mm, 450mm, 530mm and 750mm. The higher the reflectivity or the larger the diameter of the light pipe, the brighter it produces.

The light pipe was invented by Solatube International in 1986, and was designated as a door and window in 2003, the light pipe uses Fresnel lens technology to provide unparalleled daylight distribution.

The light pipe lighting system is the direct use of sunlight. The various parts of the system include: lighting cover, rainproof device, standard pipe, elbow pipe, extension tube, fixed ring, decorative ring, diffuser.

The advantages of the light pipe lighting system are small opening area, long lighting time, not limited by the building structure, and flexible turning. Truly energy efficient and environmentally friendly. The light pipe lighting system made by Nanjing Jet is good, and those who are interested can go to the manufacturer for a field visit.

The light pipe lighting system, also known as light guide lighting, gathers the natural light outside through the lighting device and introduces it into the system, and then after the light guide device strengthens and transmits it efficiently, the diffuser evenly introduces the natural light into any place that needs light in the room. From dawn to dusk, even on rainy or cloudy days, the lighting system is still well lit into the room.

The advantages of this system are small opening area, long daylighting time, and flexible turning without being limited by the building structure.

A light guide daylight system is a non-electric lighting system in which a building can use sunlight for indoor lighting during the day. The basic principle is that the outdoor natural light is efficiently collected through the dome and imported into the system for redistribution, and then transmitted by the specially made light guide tube to evenly and efficiently irradiate the natural light to any place where the light is needed, from dawn to dusk, and even cloudy days, the light introduced into the room by the light guide daylight lighting system is still sufficient. If necessary, you can refer to the case of Xinriyuan energy saving.

At present, there are two main ways to achieve energy saving in the entire lighting industry.

Journey 1: By improving the luminous efficiency and increasing the illuminance of the unit space, the actual power of the lamp is reduced and the purpose of energy saving is realized. The luminous effect of traditional T8 lamps is generally 45LM W 65LM W, and the luminous efficiency of T5 lamps is about 80LMW, and the luminous efficiency of real pure three-base T5 lamps is about 90LMW.

Route 2: Because our straight tube lamps are all 360° light, and straight tube lamps are installed on the ceiling or installed.

On the wall, only 180 degrees of light is needed, and we can use the reflection principle to reflect back the light of Duoshe, increase the brightness, which can reduce the actual rate and achieve the purpose of more energy saving.

For example, the T5 bracket lamps and lanterns that are widely popular in the market at present, LED lamps (18W-20W), are used to improve the light efficiency and reduce the actual power to achieve the purpose of energy saving, the power-saving rate of T5 bracket lamps and lanterns is generally between 30%-40%, and the power-saving rate of LED lamps and lanterns is generally between 50%-60%.

At the same time, the energy-saving lamp (16W-21W) in the light tube uses the two principles of improving light efficiency and reflection, so under the premise of increasing the brightness by about 30%, it can still save about 60% of electricity.

Light Lighting specializes in the production of tube-in-tube, energy-saving lamps, LED street lights, downlights, spotlights and other series of lighting products.

Five characteristics of energy-saving lamps in the light tube.

Features: (1) Safety: fireproof, explosion-proof; ABS fireproof plastic raw materials and explosion-proof glass pipes are used.

2) High efficiency: compared with T8 lamp, the power saving rate is as high as 60%.

3) High brightness: 30% increase in illumination compared with T8 lamp

4) Simple installation, reasonable structure, replaceable lamp.

5) The gear does not have a long service life; The product is designed to have a service life of 20,000 hours on the beam.

I hope mine can help you to some extent!

A lot of light and tubes are not known to be gods.

God-like questions, I can't understand them!

Pipe-in-tube energy-saving: nothing more than in-tube reflection plus high-efficiency energy-saving ballasts and special T5 lamps, as far as I know, Shenzhen Hanliang Technology **** production of SHIL pipe-in-tube series products, the use of special T5 lamps and special ballasts is currently the most stable performance in the pipe-in-tube industry, the longest life, the most energy-saving pipe-in-tube energy-saving products. Of course, the imitator can also save energy, but the life, energy-saving effect and stability are much worse.

Basically, 16W in the SHINL tube can be worth the illumination of 20W in the back imitator; The life of the SHINL tube in the tube is more than 20,000 hours, and the imitator is generally less than 10,000 hours (because it has no independent technology, it uses the original ordinary T5 tube lighting technology, but the power is reduced by current limiting); The stability of the shinel tube in the tube is very high, only the defect (within the shelf life), and the imitation will generally be about 5%-10% of the bad (within the shelf life) (the worse will be more than 20% or even more than 50%).

Shenzhen Hanliang Technology **** is an energy-saving lamp

Fluorescent tubes, light strips, light strips, flashlights and other products.

Professional manufacturer, the company is headquartered in Shenzhen, Guangdong Province.

Guanlan Town, Bao'an District. Shenzhen Hanliang Technology ****.

It has a sound and scientific quality management system. Shenzhen.

The integrity, strength and product quality of Hanliang Technology.

The volume has been recognized by the industry. Welcome friends from all walks of life to visit Shenzhen.

Shenzhen Hanliang Science and Technology **** visited Tongyuan, guidance and business.

Negotiate. The company has a strong relationship with a number of domestic and foreign universities and scientific research institutions.

United, committed to the research and development of high-efficiency energy-saving lamps. Company research.

The production of shinel tube-in-tube energy-saving lamps has won a number of awards.

National patent, with independent intellectual property rights, energy-saving effect.

Significant; 60%-70% power saving than T8 lamp, better than T5 lamp.

Power saving 40%-50%, more energy-saving than LED fluorescent lamp bureau absolute tube.

Save money; And it is green and environmentally friendly, with a service life of more than 20,000 hours. The advent of this product has a significant impact on our country and even the whole world.

Energy savings will play a pivotal role and will be greatly reduced.

Low production costs and environmental protection expenditures of each enterprise and increase.

Productivity. The company has always adhered to the "science and technology people-oriented".

The purpose of the technical force is abundant, and the production process is first.

Enter, the inspection equipment is complete, the management system is perfect, and the technology is perfect.

Leading the world.