-
This is that the sash was not debugged during processing, or it was not smoothed during installation. Adjust the hinge to see if it's offset. Generally, doors and windows are warranted, and regular manufacturers provide at least 2 years of warranty.
-
The installation process is to dismantle the old window - level the window edge - install the window frame - fix the window frame - beat the styrofoam in a circle - install the glass - play the sealant - refill the styrofoam or sealant - check the hardware screen window - clean up the site.
As for how to distinguish the authenticity of the hardware, you can take a look at the luster, weight, feel and product certificate.
-
1. The installation process must be met during installation, and the installation quality of each process must be checked and adjusted at any time to ensure that it meets the relevant deviation requirements of the installation.
2. The center line of the door, window and window hole needs to be drawn, the center line must be aligned when the window frame is loaded into the hole, the frame angle needs to be temporarily fixed, and the verticality and horizontality of the window frame need to be carefully adjusted to ensure that the verticality, horizontality and straight angle of the window frame need to be carefully adjusted to ensure that each installation is within the allowable deviation range.
3. Before entering the frame, we also need to check the diagonal and straightness deviations. After entering the frame, we need to check the width and clearance of the overlap with a steel ruler, etc., until the optimal requirements are met.
4. The hardware parts need to be installed correctly, and we need to replace them in time after finding the damage, so as to better ensure stable use.
-
Specific issues and specific amendments. The door won't close, probably because the door frame has been deformed, causing it to sag. In this case, the door frame can be removed first, and the sunken part can be broken with the planer used in the carpentry, and then the door frame can be reinstalled.
If the door does not close because the screws are loose, find the loose screws and retighten the screws. If there is a problem with the hinge and hinge, replace the hardware accessories with new ones, and then drip lubricating oil, and the switch will be free. Regarding the problem of door sinking, you can also use a wooden wedge, choose a small molded wooden block, and stuff it directly into the gap under the door, which can prevent the door leaf from continuing to sink.
In addition, adjust the hinge again, which can solve the problem of not being able to close the door.
If it is caused by sagging, you can first remove the door frame, use a wound to create the part that has sunken, and select a molded wooden block to plug it into the gap under the door. If the door cannot be closed due to loose screws, find the loose screws first, and then retighten the screws. If there is a problem with the hinge and hinge, replace the hardware accessories with new ones and then drip lubricating oil.
The villa master provides you with local building policies, building drawings, and villa design drawings;
Villa appearance renderings service, thousands of popular drawings for you to choose.
Villa Master.
-
There may be the following reasons why the aluminum alloy door cannot be closed:
The installation position of the aluminum alloy door hinge will cause the door and window to be unable to open or close smoothly, and the hinge installation position needs to be redetermined.
The aluminum alloy door lock strip and the lock point installation position are not compatible, and the lock point position needs to be readjusted, so that the lock bar does not touch the lock point when the fan is opened, and can touch the middle of the lock point when it is closed.
It is recommended to find a professional installer to come and check and find out the specific problem for maintenance.
-
Aluminum alloy doors and windows can't be closed, to see if it is blocked, stuck, there are traces of friction, trim the traces of the place a little, so that it is easy to close, and it may be that the window frame is deformed and caused to fall, so it will be re-reinforced.
-
If the broken bridge aluminum doors and windows can't be closed, the limiter screw should be loose, and the positioner can be tightened. This makes it easy to turn on and off.
-
If it is a simple small problem, then you can solve it yourself, and if it is more complicated, you need to ask a professional installer to repair it for you.
-
It may be broken, this kind of thing generally has a warranty period, you can contact the staff when you bought it to repair it.
-
How to repair the broken bridge aluminum window if it can't be closed (not closed tightly)?
Hello, 1. It may not be closed because the lock point on the window frame is not adjusted well, and the problem can be solved by using the tool to adjust the lock point slightly down. 2. If the window can't be closed, it may be that the screw of the positioner inside has been loosened, we can tighten the screw, if it still can't be closed, the positioner can be removed directly, so as to facilitate the switch.
-
Kiss! Hello, very high wheel which Xing will answer your <>
The adjustment method of the aluminum doors and windows of the pro-broken bridge is as follows: 1. First check which part of the problem occurs. 2. After confirmation, measure the size of the groove with a ruler.
3. According to the measured size, cut the foam cushion into the matching size length. 4. After cutting, put the foam strip into the trench position where it is not tightly closed. 5. Finally, fix the foam strip with glue and dry it.
Broken bridge aluminum doors and windows, using heat-insulated broken bridge aluminum profiles and insulating glass, have the functions of energy saving, sound insulation, noise prevention, dust prevention, waterproof and so on. The thermal conductivity coefficient K value of broken bridge aluminum doors and windows is less than 3W·K, which is halved compared with ordinary doors and windows, reduces heating costs by about 30%, and has a sound insulation of more than 29 decibels, with good water tightness and air tightness, all of which meet the national A1 window standards. Hope mine can help you <>
Do you have any other questions that you would like to consult?
-
If the broken aluminum window cannot be opened, you can ask someone to replace the sealing strip, or buy a sealing strip with a matching model to replace it. If the broken bridge aluminum window cannot be opened, it may be that the glass glue is falling off, aging, or cracking, so you can buy a bottle of glass glue and slowly squeeze it into the window gap to bond. It is also possible to find the locking point on the side of the window, which is tightened by rotating it clockwise with an Allen wrench.
1. Change the sealing strip
nbsp;There are many reasons why the broken bridge aluminum window cannot be opened, if the sealing strip of the broken bridge aluminum window is loose due to disrepair, you can ask a professional staff to replace it, or you can buy the sealing strip to replace it yourself. Before buying a sealing strip, be sure to see the model number and buy the corresponding sealing strip according to the model of the broken bridge aluminum window.
2. Gluing
nbsp;Sometimes the broken bridge aluminum window cannot be opened, which may be due to the glass glue falling off, aging, and cracking, and if this happens, it must be glued. The gluing process is very simple, as long as you buy the glass glue, squeeze a part of the glass glue against the window gap, and wait for the glue to slowly flow into the gap to dry up and fix.
3. Screw the lock point
After opening the window, find the lock point on the side of the window, rotate it counterclockwise with an Allen wrench, tighten the lock point and then try to open the window, and then you can open the window smoothly.
-
Hello dear, thank you for waiting, let me explain to you, regret that if the aluminized door in front of the bridge skin can not be closed, there may be the following reasons: the door hinge installation position or high or low will cause the door and window to be unable to open or close smoothly, and the hinge installation position needs to be redetermined. The door lock strip and the lock point installation position are not closed, and the lock point position needs to be readjusted, so that the lock bar does not touch the lock point when the fan is opened, and can touch the center of the lock point when it is closed.
I hope you can be satisfied, give a thumbs up and encouragement, thank you!
-
Materials needed: box size, foam mats, scissors.
1. First of all, look at where the windows in your home are not strict.
2. Then, use a ruler to measure the size of the groove under the window.
3. Cut the foam cushion into the appropriate size according to the size just measured.
4. Subsequently, plug the cut foam strips into the window groove that is not tightly closed.
5. Finally, after the foam strip is installed, you can use the window normally in the future.
-
Let the store find a master to see, they are more professional.
-
How to adjust the window when it is not closed: adjust the window shaft, clean the window, use lubricating oil, use pencil lead powder, adjust the pulley, etc.
1. For the window made of plastic steel, if the window cannot be closed, first check whether there are obstacles in all parts of the window, and focus on checking whether the shaft of the window runs out.
2. Because the window is exposed to the air for a long time, there will inevitably be some sand and ash layers in the place of the window sash and window frame, and these sand and ash layers will become an obstacle to closing the window.
3. Some iron windows due to long-term exposure to the air, there may be rust of iron sheets, after the rust of iron sheets, it is not easy for the windows to be pushed and pulled, at this time, you can drip some lubricating oil on the rusty places of iron sheets, and then try to move it, if the window sash has been moved, it is best to wipe the organic oil on the window frame, otherwise, it is easy to be contaminated with the ash layer and the phenomenon of blocking again.
4. If the iron sheet of the window is rusty and not easy to close, you can also sprinkle some pencil dust on the place where the window is not easy to push, because the main component of pencil end is graphite, which has the effect of lubrication. Another advantage of using pencil ends is that they are less likely to get the ash on it. When choosing to use a pencil lead, it is best to use a type B pencil lead.
5. If it is a push-pull window, each window has a pulley, and the window will not close after the pulley derails, so we still lift the window up hard, and then re-stuck the pulley in the middle of the track.
If it is a wooden window, it is likely that the wood of the window is deformed, and you can use a wood-throwing tool to cut off the extra wood a little and close it.
The quality of window soundproofing does not depend mainly on the profile, but on the glass. The sound insulation effect of the authentic broken bridge aluminum profile itself is very good, but the poor sound insulation effect of the glass will lead to poor sound insulation effect; Your new balcony broken bridge aluminum window, the sound insulation effect is not good at all, it is estimated that the use of false insulating glass; If you want good sound insulation, it is recommended that you replace all the glass with "6+6 vacuum glass" (that is, the hollow of the two layers of glass is vacuumed).
1. Engineering design.
1. The engineering design must be calculated and tested for strength design, and it is only based on the standard atlas and the type test report provided by the profile manufacturer to make, install and accept, which is wrong or even dangerous. Because the standard atlas is only a large sample of a series of window types, and does not indicate the load that can be borne by the construction according to the drawing, it cannot be used as the basis for production, installation and acceptance. For different series of doors and windows, the strength and deflection must be checked or tested according to the principle of the most unfavorable stress state. >>>More
1. No deformation, no cracking, insect-proof, corrosion-resistant, environmental protection and energy saving. >>>More
How to replace window seals.
When you find that your window seals are damaged, the first thing to do is to remove the old ones. There are also different ways to remove window seals depending on the type of window. If it is to open a window, then its sealing strip is very easy to change, just pull off the old one, if the old tape is harder, not too easy to pull, then use the wallpaper blade along the strip mouth to cut open, the new one is pressed on the strip mouth with a small wheel to replace it. >>>More
Broken bridge aluminum. Flat windows and broken bridge aluminum sliding windows. >>>More