The house has just been renovated, please ask to find a socket switch to install

Just like the bedrooms in our homes, there is usually a light switch. We also need to set up the socket according to the position of our press bed, as well as the position of the wardrobe. Some wardrobes also have sockets, etc.

So we need to consider the layout of the switch socket in the bedroom. Many owners do not pay much attention to the layout of the switch and socket at home before the decoration, resulting in lack of experience, such as the socket is not enough, or the furniture is blocked by the socket, or the general branch layout is unreasonable, etc., then, the master summarizes the layout of the switch and socket of the whole house, I believe it will be of great help to you.

The decoration pit is tens of millions, and the switch and socket are the first. The pit of the socket switch has been struck by countless owners, or there are few outlets, or the socket is in the wrong position and cannot be used. Today we are going to come to the house to arrange the general installation of the switch and socket, so that this pit is as shallow as possible.

Before designing, first list the household appliances, and determine the size and placement of each household appliance so that the location and number of sockets can be correctly located. The switch of the entrance lamp and the living room lamp is generally set at the entrance of the door, where the door is opened in the opposite direction. So you can turn on the lights as soon as you open the door.

Or use sensor lights on the porch. The shoe cabinet in the entrance can generally be designed with upper and lower cabinets, with a countertop in the middle, or just a short cabinet.

This way you can put an outlet on the counter. Two sockets are needed on the left and right sides of the sofa, and you can use mobile phone charging, aroma diffuser, humidifier. If the living room is a projector, two 5-pin sockets should also be reserved in the corresponding position on the sofa wall, as well as cable plugs.

The TV cabinet needs to reserve 4-5 sockets, common TVs, set-top boxes, and routers. Others are saved for later use. The restaurant light switch can be installed on the road wall near the restaurant, making it easy to turn on the lights when passing by.

The kitchen socket can choose a socket panel with switch control to avoid frequent plugging and unplugging, which affects the service life. The socket needs to be equipped with a waterproof cover to avoid a short circuit that could cause water to splash into the socket. Keep away from stoves to avoid high temperatures.

1. Distinction of air switch circuits: refrigerators and aquariums should be left alone 2, each air conditioner should be separated from one road 3, the lighting of the kitchen should be divided into two roads, the socket should be divided into one road 4, and the socket in the children's room should also be left separately.

2. Air conditioning socket: The best place to install is about 18 cm away from the ceiling, and it is perfect to control it with an air switch and then deal with the conduit.

3. Washing machine: The socket of the washing machine is best placed together with the faucet, and if there is a condition, it can be put into the cabinet of the washing machine, and the plug with switch control can be used to avoid frequent plugging.

First of all, it is necessary to determine the location of the socket, to install the socket in the living room, bedroom, and bathroom, determine the height of the socket, and it is best to choose the socket with multiple connection switches.

It should be installed at the head of your own bed, and then installed one at the door of the room, so that it will be more convenient and economical.

1. Look at the appearance of high-quality switches and socket panels should be made of high-grade plastic products, which look like uniform materials and smooth surfaces. The panel materials are all made of PC material (bulletproof adhesive) imported by General Motors of the United States, which has excellent flame retardancy, insulation and impact resistance, and the material is stable and not easy to change color. The selection of switches and sockets produced by such materials can greatly reduce the occurrence of fires and other situations caused by circuit reasons.

2. Looking at the internal structure, as far as the switch is concerned, sterling silver contacts and conductive sheets made of silver-copper composite materials should usually be used, which can prevent oxidation caused by arc when opening and closing. The conductive bridges of the high-quality panels are made of silver-nickel-copper composites. The conductivity of silver material is excellent, and the ability of silver-nickel alloy to suppress arc is very strong, and the switch adopts brass screw crimping, with large and good contact surface, strong crimping ability, and stable and reliable wiring.

Single-hole wiring copper pillar, large capacity of connection and infiltration transportation, not limited by the thickness of the wire diameter. 3. The safety protection door of the safety socket is indispensable, and you should try to choose the product with the protection door when choosing the socket. Secondly, it is necessary to check the tightness of the socket clamp piece, and the smooth insertion force is a key factor.

At the same time, the strong squeezing makes the plug not easy to fall off, which effectively reduces the non-human quiet factor.

Installation steps for ground sockets.

1.Of course, the first thing to do is to determine where the ground socket is installed.

2.Draw a box with the box frame of the socket and dig a hole according to the drawn frame line. The depth is equivalent to the thickness of the socket.

3.Fix the plastic plate to the bottom of the dug pit, thread three unstripped wires through the mounting box, and then fix the mounting box.

4.Connect the stripped neutral wire (usually blue) to the socket connector, and then strip the live wire (usually red) to the socket connector (usually the live wire and neutral wire of the socket).

5.Carefully place the socket into the mounting box and secure. The installation is complete.

Hello dear, according to the situation you described, 1. You can choose to install the bright and dry Dan, find the nearest power supply around the location where you need to increase the socket, and then take the zero line, and connect the new socket in series on the wall. 2. You can also chisel the wall and install it secretly, add a socket on the wall, first make a hole in the back of the socket, install the conduit, and then thread the line from the opposite side of the wall, and finally install the socket on the opposite side of the wall. 3. You can also cut the groove directly on the wall, and repair it on the wall after walking the line.

The invention of electricity has brought a lot of convenience to human beings, and the part about electricity is also very important in the process of decoration. Switches and sockets, as essential electrical accessories in daily life, have high safety requirements for them. How can I makeSwitch socket installation

1. Prepare switches, sockets and accessories.

Before installation, you need to check whether the switch and socket products are regular brand products, and it is best to check the authenticity of the products. It also depends on whether the product installation accessories are ready, such as metal expansion bolts, plastic expansion pipes, galvanized screws, etc.

2. Preparation of installation tools.

Before installation, it is also necessary to prepare special installation tools, such as a ruler or a line pendant for measuring and determining the position and height; Electric drill for drilling, as well as electric testers, insulating gloves, wire strippers for installation, etc.

3. Preparation of installation conditions.

The installation of switches and sockets needs to meet certain operating conditions, and it is required to start after the decoration work such as wall whitewashing, painting and wallpaper is completed. And the circuit pipes and boxes have been laid, and the insulation telemetry has been completed. Ensure that the weather is clear, the house is ventilated and dry, and the power supply of the electrical box is cut off.

Second, the switch and socket installation process

The installation process of ordinary switches and sockets is relatively simple and time-consuming, and generally all the switches and sockets in the home can be installed by electricians within one day. The installation process of switch and socket is generally three steps: cleaning, wiring and fixing.

1. Clean the bottom box.

The switch socket is installed after the carpenter, painter, etc., and the bottom box that has been left for a long time will inevitably accumulate a lot of dust. Clean the switch socket bottom box during installation, especially clean the dust and impurities in the box, and wipe the residual dust in the box with a damp cloth. Doing so prevents special impurities from affecting the use of the circuit.

2. Connect the power cord.

Leave the wire thrown out of the box for repair, and then cut out the core and file it, taking care not to touch the core. Coil the wire clockwise on the binding post corresponding to the switch or socket, and then tighten the indenter, requiring that the core is not exposed.

Generally speaking, different products have different wiring methods. Generally, switch and socket products will come with their own product installation instructions, and they need to be installed according to the instructions during installation. The most basic requirement is that the live wire (L), the zero positive object (n) and the ground wire (E) cannot be connected incorrectly.

When wiring, connect the different wires into the corresponding switch socket holes, and then tighten the screws with a screwdriver.

3. Installation and fixation.

After connecting the power cord, place the switch socket in the installation position, align it with a level, and then fix it with screws. Finally, cover with decorative panels.

I believe that after reading this article, you have also noticed that it is not difficult to install the switch socket lifting liquid. However, we still have to remind you that it is not difficult to install, and you must pay attention to safety! During the installation process, it is necessary to cut off all power supply to prevent the occurrence of anything else, the above is a detailed answer to the installation of switches and sockets, I don't know if you are satisfied with our introduction.

Determining the location of the switch socket should first consider the following three aspects:

First, the role that nature will play in the future. For example, it is necessary to determine the master bedroom, the second bedroom, and the study first;

Second, the placement of major electrical appliances and furniture. For example, TVs, refrigerators, cabinets, bookshelves, etc.;

Third, the living habits of the family. For example, if you like to watch TV while eating, you should consider installing a wired socket in the dining room.

a) Master bedroom.

Switch: 1 (master bedroom overhead light).

Sockets: 6 (2 bedside lamps, air conditioning, **, TV, floor lamp) (2) secondary bedrooms (children's room).

Switch: 1 (second bedroom ceiling light).

Sockets: 4 (air conditioner, **, desk lamp socket, spare socket) (3) study.

Switch: 1 (study ceiling light).

Sockets: 6 (network port, air conditioner, **, study lamp, computer, spare socket) (4) living room.

Switch: 1 (living room ceiling light).

Sockets: 6 (TV, water dispenser, air conditioner, **, floor lamp, spare socket) (5) toilet.

Switches: 2 (bathroom ceiling light, exhaust fan or bath bomb).

Sockets: 4 (washing machine, hair dryer, electric water heater, **) (6) kitchen (kitchen, dining room in one).

Switches: 2 (kitchen ceiling light, dining room ceiling light).

Sockets: 7 (refrigerator, range hood, kitchen, microwave, shabu-shabu socket on the dining table, at least two spare sockets on the countertop).

7) Balcony: Switch: 1 (balcony top light).

Outlet: 1 (spare outlet).