What should I do if the lid of a water cup falls off? What to do if the inner liner of the lid of th

When the lid of your water cup comes off, you can try the following two methods:

1.Repair with rubber bands and plastic wrap. First, find two or three pale yellow rubber bands, scald them in hot water and let them cool, then wrap them together.

Then, put the rubber band directly into the water cup where the inner rubber ring was originally placed, and tighten it tightly with your hands. Alternatively, pull a piece of plastic wrap and roll it into a thin strip by hand that wraps around the lid and leaves a little bit of it. Then, put the long strip of plastic wrap into the inner rubber ring and pinch it with your hands.

Note, however, that both methods may need to be replaced frequently to maintain the seal.

2.Repair is carried out using a plastic liquid made of melted paraffin wax or 502 glue. If the above methods do not solve the problem, consider using a liquid plastic made of melted paraffin wax to apply to the lid joint, which will enhance the adhesion between the cup lids and prevent the lid from falling off again.

However, please note that caution should be taken to avoid spilling the liquid plastic or glue into the inside of the bottle or on the glass.

If none of these methods solve the problem, it is advisable to seek help from a professional technician.

If hot water is poured into the cup, and then the inside of the cup is full of water vapor and the temperature is very high, then the cup will expand, and then screw the lid, and a large pressure difference will be formed between the inside and outside of the cup, so that the lid of the cup will be difficult to unscrew. When the cup can't be opened, first turn the cup upside down with the mouth of the bottle down, and then slap the bottom of the cup with the palm of your hand, pat a few more times, and then try to screw the cap, if you still can't open it, just turn it upside down like that just now, and it will be easy to open it. We first prepare a basin, then boil the water, pour the hot water into the basin, and then put the water cup that can't open the lid into the hot water to soak, so that the water in the thermos cup will become warmer, and then the volume inside will expand, and then take the thermos cup out of the hot water, in order not to burn your hands, wrap a towel when you twist it, so that it is easy to open.

When the lid of the water cup cannot be opened, you can put the water cup in the refrigerator to freeze it for a while, freeze it for a while, and then take the water cup out of the refrigerator, and then pour the lid of the water cup with hot water after taking it out, so that the lid of the water cup can be easily opened.

1. Find two or three rubber bands, which are the kind of pale yellow rubber bands, scald them with hot water, and wrap them together after they are cool.

2. Directly put the rubber band into the water cup where the inner rubber ring was originally placed, and tighten it tightly with your hands.

3. Teach you another way, pull a piece of plastic wrap and knead it into a slender strip by hand, the length can surround the lid of the cup and leave a little more.

4. Put the long strip of plastic wrap into the position of the inner rubber ring, and pinch it by hand, but it should be replaced frequently, otherwise there will be no sealing effect.

Plastic wrap is required.

Scissors. Here's how:

1. First prepare the plastic wrap as shown in the picture below, as well as scissors and a lid for the cup. As shown in the figure below:

2. Roll the plastic wrap into strips, the thickness is a little larger than the card slot of the water cup. As shown in the figure below:

3. Stuff the plastic wrap into the card slot of the water cup with scissors, and pay attention to covering the gasket. As shown in the figure below:

4. Then put the lid firmly on the water cup and tighten it. As shown in the figure below:

5. Then shake the water cup to see if there will be water leakage, and you can do it. In this way, the gasket will not always fall out, but the plastic wrap must be changed frequently for hygiene. As shown in the figure below:

Features of the inner liner of the lid of the cup.

1. A variety of colors to choose from, bright colors, customizable shapes, the lid and the hijab are made separately and then assembled together, you can DIY any style.

2. Strong adsorption, unique soft silicone material can arbitrarily adsorb any level of glass, ceramic or stainless steel cup mouth; The entire cup can be lifted using air pressure.

3. The raw material is made of 100% food-grade environmentally friendly silica gel, with soft texture and strong plasticity.

4. Low carbon and environmental protection, non-toxic and tasteless, soft, non-slip, shockproof, anti-seepage, heat insulation, not easy to age, not easy to fade, easy to clean.

5. Durable, effectively protect the surface of furniture from being burned.

Scratches. 6. The temperature resistance range is: -40 230 degrees Celsius.

Baking and freezing remain soft and undeformed.

You can make a gasket with plastic wrap, and the materials you need to prepare include: plastic wrap and scissors.

First, prepare a water cup lid with a lost gasket.

Second, then take out the plastic wrap and roll it up, the thickness is slightly larger than the rubber ring card slot in the lid of the cup.

3. Then use scissors to poke the plastic wrap rolled with the liquid into the lid of the water cup.

4. Make sure the plastic wrap fills the lid of the cup.

Fifth, finally close the lid of the water cup, so that Kaiqing can lose the gasket.

Summary. At.

The gasket inside the lid of the cup keeps falling out, how to solve it.

At. What to do if the mat is old.

First of all, you can find two or three rubber bands, scald them with boiling water and dust, and let them cool and wrap them together; 2.Then put the rubber band directly into the water cup, where the original rubber ring was placed, and tighten it tightly with your hand; 3.Of course, you can also pull a piece of plastic wrap, rub it into a slender strip with your hand, and then put it into the position of the inner rubber ring, and pinch it with your hands. Thank you.

Summary. Why can't the lid of the water cup bounce up, how to fix it, dear to you, twist it vigorously. 2. Turn the cup upside down, slap the bottom of the cup a few times, and then screw the cap.

3. If you can't open it, the cup is generally under negative pressure, so you can put the cup in hot water to soak, and when the water in the cup heats up and the volume expands, it is easy to open. 4. Heat the lid of the cup quickly, so that there is a gap between it and the cup. 5. Put it in the refrigerator first and freeze it, and pour hot water on the lid (just the lid) after taking it out to ensure that you can open it.

6. Use a key (other flake-like metal is also OK, insert it wider, and do not hurt the cup lid) to gently pry it at the gap between the cup lid and the cup mouth, and the air will enter with a snort, and it is easy to open with a slight twist.

Why can't the lid of the water cup bounce up, how to fix it, dear to you, twist it vigorously. 2. Turn the cup upside down, slap the bottom of the cup a few times, and then twist the lid source. 3. If you can't open it, the cup is generally under negative pressure, so you can put the cup in hot water to soak, and when the water in the cup heats up and the volume expands, it is easy to open.

4. Quickly heat the lid of the cup to crack it, so that there is a gap between it and the cup. 5. Put it in the refrigerator first and freeze it, and pour hot water on the lid (just the lid) after taking it out to ensure that you can open it. 6. Use a key (other flake-like metal is OK, insert it wider, do not hurt the cup lid) in the gap between the cup lid and the cup mouth, and gently pry it, and the air will go in with a snort, and it is easy to open it with a slight twist.

There are two scenarios when the lid is broken:1A certain spring in the thermos cup is misaligned, 2

One of the disposable items in it is broken. If nothing else falls out, it should be the first one. First study and memorize the current appearance of the cup lid, then take apart all the screws and try it, and then study the various parts after dismantling and put them together.

If you've been using it for a long time, you'll probably be familiar with the knot trapping structure. Finally, you can put it back in and laugh. If the first Huai ruler contains two kinds of parts, it is recommended to buy a new one.

What should I do if the spring inside the button of an ordinary water cup is stuck.

Is it the kind of spring in the button of an ordinary water cup that is stuck, what should I do if a spring in the thermos cup is misplaced, 2One of the disposable objects inside is broken. If nothing else falls out, it should be the first one.

First study and remember what the cup lid looks like now, then take apart all the screws and try it, and then study the various parts after dismantling. If you've been using it for a long time, you'll probably be familiar with the structure. Finally, you can put it back on.

If the second part is damaged, it is recommended to buy a new one.

Press the spring on the cover, and the close that pushes it up is connected together, there is a protruding thing in the close, which is the positive light dissipation spring, and there is a baffle on the cover to jam the spring, the red open, under the close. Close the inlay under the water outlet, and then press the two of them together with the lid and the main body. Key cheats.

If you can't open it, you can repair it, or you can't open it and put it back, you can buy a new one, and now there are only cup lids sold online, and there are many options.

Summary. Hello dear, happy to answer your <>

How to repair the broken lid of the cup is 1. If the lid of the cup is broken, you can use 502 glue to stick it. Second, if it can't be sticked, you can find a merchant who buys a cup, and let the merchant find a way to match you with a lid. 3. In addition, the water cup is usually a container for people to hold liquids, which can usually be used to drink tea, water, etc.

How to fix a broken cup lid.

I'm in a hurry. Hello dear, happy to answer your <>

How to repair the broken lid of the cup is 1. If the lid of the cup is broken, you can use 502 glue to stick it. Second, if it can't be sticked, you can find a merchant who buys a cup, and let the merchant find a way to match you with a lid. 3. In addition, the water cup is usually a container for people to hold liquids, which can usually be used to drink tea, water, etc. a4