Do I need to clean my new water dispenser before using it? How to wash

The water dispenser is a tool that comes into direct contact with drinking water, and the method of cleaning the water dispenser is as follows.

Tools Materials:

Water dispenser, towels, tablets of disinfectant water.

Method Steps:

1. First turn off the water dispenser.

2. Rotate the bucket pad of the water dispenser counterclockwise to remove it.

3. Put a little water in the sink and pour half a bottle of diluted disinfectant into the sink.

4. While waiting for the disinfection to soak the soaking sink, wipe the outside of the water dispenser and the outlet and inner groove of the water dispenser with a rag.

5. Open the water dispenser outlet, drain the appropriate amount of disinfectant water, rotate the soft plug behind the water dispenser, and drain all the disinfectant water.

6. Put back the plastic cushion clockwise, put the bottled water on, open the rubber plug at the back, release a quarter of the water in the bucket, and then plug the rubber stopper.

7. Open the two water outlets, release a quarter of the water, and install the water storage tank.

8. Wipe the outside of the water dispenser with a rag again, dry the water dispenser power socket with a clean paper towel and keep it dry.

1. The new water dispenser needs to be cleaned for the first time.

2. First of all, turn off the power of the water dispenser, take down the bucket on the water dispenser, and open the sewage outlet on the back of the water dispenser until the remaining water is drained clean; Secondly, wipe the water dispenser and the inner tank cover with an alcohol swab and connect the power supply, and turn on the heating switch while adding citric acid.

Add to the inner tank and heat for 10 minutes; Finally, wipe the body with an alcohol swab and rinse the water dispenser with clean water.

<> before using the water dispenser for the first time, it is recommended that you wash it to ensure the hygiene and cleanliness of the inside of the water dispenser. Here are the steps to clean the water dispenser:

Prepare cleaning utensils: Cleaning utensils can include cleaning cloths, detergent, bleach, and clean water.

Turn off the power and unplug it: Before starting cleaning, you must make sure that the water dispenser is turned off and that the plug has been removed from the electrical outlet.

Drain the water from the tank: The water from the water dispenser should be emptied before you start cleaning.

Wash the exterior: Wipe the exterior surface of the water dispenser with a damp cloth to remove dust and dirt.

Clean the water tank: Wash the water dispenser's tank with detergent or bleach and clean water to remove bacteria and dirt. When using bleach, be sure to prepare the bleach according to the ratio on the instructions and rinse it well to ensure the safety of drinking water.

Rinse: After cleaning, rinse all parts of the water dispenser thoroughly with clean water to ensure that all detergent and bleach residues are removed.

Start the water dispenser: After the washing and rinsing are complete, pour out the water in the water tank again, reconnect the water dispenser to the power outlet, and start the water dispenser as instructed on the instructions. Before you start drinking, make sure the water dispenser is fully operational and free of odors.

Please note that the water dispenser should be cleaned frequently during daily use to ensure the hygiene and safety of drinking water. Regular cleaning can prevent bacteria and dirt from multiplying inside the water dispenser and ensure the quality of drinking water.

1. The first time you use the water dispenser, you need to clean it, when cleaning the water dispenser, you must first turn off the power supply, then remove the bucket on the water dispenser, and at the same time open the sewage outlet at the back of the water dispenser to drain the remaining water in the water dispenser.

2. When cleaning the water dispenser, you need to remove the part that comes into contact with the mineral water inside the water dispenser, and wipe the lid of the water dispenser and the inner tank with alcohol cotton, so that the water dispenser can be easily disinfected.

3. Connect the power supply of the water dispenser, turn on its heating switch at the same time, and put food-grade citric acid at the same time.

Place in a heated liner and heat it repeatedly or follow the disinfectant.

After pouring the disinfectant water into the water dispenser, the disinfectant water will fill the entire inside of the water dispenser, and let it stand for about 10 minutes.

4. Use alcohol cotton to wipe the back wall of the water dispenser switch, because the cup is easy to touch the back wall of the water dispenser switch when using the cup to receive water, so you can't just use a rag to scrub, alcohol is actually a good disinfection tool.

5. Use clean water to rinse the inner tank of the water dispenser, and then put a glass of water to ask if there is chlorine in the water.

until you can't smell chlorine.

6. When cleaning the newly bought water dispenser, you can also choose to boil a pot of water, throw one or half a lemon into the water, and then put the water into the water dispenser, so that the water slowly flows out of the water dispenser, because the lemon has a sterilizing effect, so it is best to clean the water dispenser you just bought.

1. Cut off the power supply of the water dispenser;

2. Insert the 5-gallon water bottle vertically down into the smart seat on the upper part of the machine, turn on the red hot water faucet and the blue cold water faucet until the water is released, then close the faucet, and then hold the bottle with both hands and take out the water bottle upward;

3. Clean the outside of the water dispenser and the smart seat;

4. Pour 600ml of special cleaning and disinfectant into the water storage tank;

After a few minutes, turn on the red and green faucets until the disinfectant is exhausted;

6. Unscrew the water drain valve at the back or bottom of the machine to drain the disinfectant in the water dispenser;

7. Rinse several times with boiling water or purified water;

8. Tighten the drain valve, and the disinfection and sterilization operation procedures are completed.

The newly bought water dispenser can pour 500 ml of white vinegar for disinfection, and the white vinegar should be soaked for about half an hour after pouring it in.

Then let the white vinegar flow out of the water outlet until it is clean, and it is best to rinse it with water.

Because white vinegar has anti-virus effect, it is also something we have at home, and it is also very convenient to clean, so it is the best choice.