How to clean the scale of the water dispenser storage bucket

Add salt with vinegar, dilute it in appropriate proportions, and rub vigorously with a rag soaked in water.

Just get some vinegar.

What is inside is calcium carbonate that reacts with vinegar, and vinegar is relatively safe.

To remove limescale from the water dispenser, you need to prepare: water, white vinegar.

1. If there is water in the water dispenser, you need to drain the water in it first.

2. Next, you need to remove the hinge on the water dispenser.

3. Pour an appropriate amount of white vinegar into the water dispenser, the acidity of white vinegar can effectively decompose the scale in the water dispenser.

4. Then heat the water dispenser and boil the white vinegar inside.

5. Next, put away the white vinegar inside.

6. Pour water into the water dispenser and rinse the water dispenser.

7. Finally, release the water in the water dispenser and it is completed.

With the improvement of living standards, the use of water dispensers in homes and offices is becoming more and more common. However, after using the water dispenser for a long time, limescale often occurs, which not only affects the taste of drinking water, but also may have an impact on human health. Here are some methods for cleaning limescale in water dispensers for your reference.

Manuscript base. 1.Using the vinegar water washing method: press the vinegar and water at 1:

Mix in the ratio of 1, then pour the key into the water dispenser, turn on the hot water button for 2-3 minutes, then turn off the water dispenser, and let the vinegar water stay in the water dispenser for about 30 minutes. Then pour out the vinegar and rinse the water dispenser twice with clean water.

2.Use the lemon clear citric acid cleaning method: press citric acid and water at 1:

Mix in a ratio of 10, then pour it into the water dispenser, turn on the hot water button for 2-3 minutes, then turn off the water dispenser, and let the citric acid water stay in the water dispenser for about 30 minutes. Then rinse the water dispenser twice with clean water.

3.Use professional cleaning agents: There are special cleaning agents on the market that can clean the scale of water dispensers, and you can follow the instructions after purchasing. But pay attention to choose regular brand products to avoid quality problems.

4.Change the filter regularly: The filter is also an important part of the water dispenser's cleaning. Regular replacement of the filter can effectively prevent the generation of pollutants such as scale, so as to ensure the water quality of the water dispenser.

In short, regular cleaning and maintenance of water dispensers can ensure the cleanliness and health of water quality, and improve the use effect and lifespan. The four methods introduced above are all feasible, and the specific choice of which method can be determined according to your actual situation.

1. Cut off the power of the water dispenser and remove the empty bucket. Clean the surface of the body with neutral dish soap first, but do not use organic cleaning agents, otherwise Sun Xiao will corrode the surface of the water dispenser; You can use a dry cloth or alcohol cotton ball to clean the water inlet, faucet, water tray and other parts;

2. Open the sewage pipe behind the water dispenser and all drinking water switches, and empty the remaining water;

3. Use a clean cloth to scrub off the white scale on the water storage tank;

4. Fill the water storage tank with clean water, and then put in a disinfectant tablet (such as Shuyikang decontamination effervescent tablets sold in pharmacies for disinfection of water dispensers), and soak for 15 30 minutes;

5. Open all the switches of the water dispenser, including the sewage pipe and drinking water switch, and drain and clean the disinfectant;

6. Continue to pour boiling water or bottled water, continuously flush the entire cavity of the water dispenser, and then turn on all switches to drain the flushing liquid. Repeat several times until the water is free of chlorine odor before drinking;

7. Finally, tighten the drain valve and scrub the back wall of the switch with disinfectant to complete the entire disinfection process.