The water coming out of the water dispenser smells of rubber, what s going on, what to do

The newly bought water dispenser has a glue smell because the water dispenser contains hoses and plastics, and it is normal to have a glue smell when you first use it.

Some water dispensers have a strong taste, you can boil a pot of boiling water, then add some tea leaves, filter out the tea after brewing the tea, pour the tea into the water dispenser, wait for a period of time and then release the tea, and finally clean it with boiling water several times;

Generally, the water dispenser needs to be cleaned several times with warm water for the first time, and the hot water can only be used after boiling several times.

Note: Water dispensers should generally be cleaned every three months to avoid bacteria breeding inside.

Boil a bucket of boiling water, pour it into a bucket of pure water, and then release it again.

In addition, the water dispenser should be disinfected before being used again after the first use or long-term outbreak. The specific method is: mix a piece of disinfectant (some water dispensers are randomly dispensed) with 5-6 liters of purified water to make a disinfectant, inject it into the water dispenser, continue to soak and disinfect for 20 minutes, open the drain valve of hot irrigation to drain the disinfectant, then close the drain valve, and then inject pure water into the machine for rinsing until the water from the faucet has no smell.

During cleaning and maintenance, or when the water dispenser is out of use for a long time, please unplug the power supply.

Water dispensers should be disinfected and cleaned once a month to ensure water hygiene. Before using the water dispenser for the first time or after a long period of inactivity, the user should disinfect it. Here's how:

Mix a piece of disinfectant (some water dispensers come with it) with 5-6 liters of purified water to make a disinfectant, inject it into the water dispenser, continue to soak and disinfect for 20 minutes, open the drain valve of the hot irrigation to drain the disinfectant, then close the drain valve, and then inject purified water into the machine for rinsing until the water from the faucet has no smell. During cleaning and maintenance, or when the water dispenser is out of use for a long time, please unplug the power supply.

If it's not a water problem, or the parts that leak under the pretext of water, is it a new machine? Usually you don't have this problem! Is there any heating when there is no water?

The methods to eliminate the plastic smell of water dispensers are as follows:

1. Lemon eliminates odor.

Before removing the odor of the water dispenser, unplug the water dispenser, then put all the water in it, and cut it in half with a lemon. Prepare a small basin with about 500ml of water in it, squeeze out the juice, and put the lemonade that has been prepared.

Pour it into the water storage tank, put the bucket on the water dispenser, and then press the switch to boil the water for about an hour, and put all the lemonade away, so that you can eliminate the plastic smell of the water dispenser.

2. Tea to eliminate peculiar smell.

Boil a pot of boiling water, then add some tea leaves, filter out the tea after brewing the tea, pour the tea into the water dispenser, wait for a while and then release the tea, and finally wash it with boiling water several times, so that you can eliminate the plastic smell of the water dispenser. Generally, the water dispenser needs to be cleaned several times with warm water for the first time, and the hot water should be boiled several times before it can be used.

The solution to the plastic smell of the water dispenser: you can use lemon to eliminate the odor and tea to eliminate the odor, and the effect is relatively good.

The water dispenser plastic smell is not toxic. The water dispenser has a plastic smell because the water dispenser contains hoses and plastic, and it is normal to have a plastic smell.

Ways to remove the smell of plastic:

1. Generally, pour boiling water into the water dispenser, wait for half an hour and then pour out the water, and repeat this several times.

2. Some water dispensers have a strong taste. You can boil a pot of boiling water, then add some tea leaves, filter the tea leaves after brewing the tea, pour the tea into the water dispenser, wait for a while before releasing the tea, and finally wash it with water with boiling water several times.

3. Generally, the water dispenser is cleaned several times with warm water for the first time. Hot water needs to be boiled several times before it can be used. When draining water, it is best to open the piston on the back of the water dispenser to drain the water inside.

Use and maintenance of water dispensers:

1. The handling machine should be handled gently, and when the water dispenser refrigerated by the compressor should be moved as much as possible, if it is to be tilted, its inclination shall not be greater than 45 degrees, and it should be stationary for a period of time after handling before it can work.

2. When using the water dispenser for the first time, clean the containers and pipelines of the water dispenser with clean water, then unscrew the drain valve, and tighten the drain valve after draining the remaining water in the machine. After adding a large bottle of water, turn on the hot water faucet, and then plug in the power supply and turn on the heating switch after the water flows out, so as to avoid dry boiling and prolong the life of the machine.

3. If the water dispenser is out of use for a long time, please turn off the switch of the machine and unplug the power plug, then unscrew the drain valve, drain the remaining water in the machine, and then tighten the drain valve (please pay attention to hot water scalding during drainage.)

4. It is best to disconnect the power supply when not in use at night, which can save energy and ensure safety when no one is in use.

5. During the use of the machine, it is recommended to clean and disinfect it once in about 3 months according to the specific situation, and use it for one year.

First pull out the plug, then put all the water out, cut a lemon into 2 halves, (you can also use 2) prepare a small basin, put about 600ml of water in it, squeeze out the juice, (note that you can't squeeze the flesh of the lemon in, if you accidentally fall into the water, you have to filter it out, otherwise it will block the place where the water comes out,) After these are done, take down the bucket, and then pour the prepared lemonade into the water storage tank, and then press the switch to boil the water for about an hour, This time, I put water from the back of the water dispenser, there is a big water outlet at the back, open the valve, and the scale will come out, and some of the scale is relatively large, you can take a toothpick to dig it out. This is easier and safer to clean.

The method of cleaning is as follows:

Step 1: Unplug the power plug, remove the bucket, open the drain nozzle behind the water dispenser (usually a knob made of white plastic), and drain the remaining water. Then, turn on the hot and cold water switch to drain the water.

Step 3: Configure disinfectant water according to the instructions of decontamination effervescent tablets or disinfectant, introduce it into the water dispenser, fill the entire cavity with disinfectant water, and leave it for 10 to 15 minutes.

Step 4: Turn on all the switches of the water dispenser, including the sewage pipe and drinking water switch, and drain the disinfectant.

Step 5: Continuously rinse the entire cavity of the water dispenser with clean water (it is recommended to move the water dispenser to the bathroom to ensure sufficient water), turn on all switches to drain the flushing liquid.

Step 6: Put a glass of water and smell for chlorine. If so, put in the water until you can't smell any smell before you can drink it safely.

Experts recommend cleaning the water dispenser at least once every 2 months, and every month in the summer.