How to clean the bucket of the water dispenser, how to clean the water dispenser under the bucket?

People who regularly drink bottled water will encounter such a situation where there is moss in the barrel. What's going on? How do you clean the moss in a bucket?

The bucket on the water dispenser at home, especially the bucket that some families use to go to the community water purifier to drink water (the harm caused by it is not explained in detail here), the water in the bucket is easy to grow moss after a long time or when it is heated. So, how do you wash the moss inside the bucket? Today, let's talk about drinking water knowledge in this area.

The reason for the production of moss in the barrel is 1, there are often trace amounts of algae spores in the air in the office or home environment, especially in the humid and near the green plants, there are often moss spores, algae belong to photoautotrophs, they contain chlorophyll, and it is easy to use water, minerals and carbon dioxide for photosynthesis under light and suitable temperature conditions, synthesize the organic matter necessary for algae, and reproduce and derive on this basis, and then form moss.

2. Once the algae spores enter the mineral water with the air, they will multiply rapidly as long as there is sunlight or sunlight and light sources, so what we call green algae will appear in the mineral water and mountain spring water. Bottled water with moss can also lead to contamination of the water dispenser and moss growth.

3. The bucket is often used to draw water from the community water purifier, and the bucket will grow moss without professional disinfection and cleaning.

4. After the water dispenser has grown moss, there will be moss spores in the water storage tank, pipe and outlet water faucet of the water dispenser, and the special disinfectant for the water dispenser is generally used to clean the water dispenser, and the moss in the water dispenser can be used. If the moss in the water dispenser is not **, it will often cause the bottled water used on it to grow moss. 5. Some water dispensers that have grown moss over moss are repeatedly mossed after cleaning

It may be related to the unprofessional cleaning of the water dispenser or the failure to use the disinfectant used for the water dispenser. Another reason is that some water dispensers are not equipped with air filters or the quality of the air filtration device is not satisfactory in order to reduce production costs or have defective designs, so that moss spores can easily enter the water in the bucket through the air suction port and grow.

Moss removal method in the barrel of water Common cleaning methods: put a small amount of rice (or baking soda) into the bucket of long moss, add a small amount of water, shake the bucket vigorously, so that the rice and the bucket rub against the moss on the bucket to grind down, see the bucket return to the original state, pour out the rice and rinse it to dry, wash the bucket with water, and dry. Common cleaning methods for bottled water production enterprises:

1. Soak in alkaline water for 24 hours; 2. Separate cleaning through special equipment; 3. Use professional production equipment for re-cleaning, re-disinfection, re-cleaning and re-disinfection, so that 12 processes can be put into normal use in the market after repeated cleaning. Here, a special reminder: try not to use the bucket that has been used for disinfection and cleaning of the water plant, and go to the community water purifier or the wild spring water outlet to drink, and the bucket must be professionally disinfected and cleaned before it can be used for the second time.

Summary. Hello dear, here's how. 1. White vinegar cleaning:

First, disconnect the power of the water dispenser and clean up the remaining water in the water dispenser. Remove the plastic seat cushion from the water dispenser that is stuck in the canister. 2. Pour about 250ml of white vinegar into the water dispenser, then turn on the faucet to verify that the white vinegar has entered the water storage tank.

3. Put the plastic seat cushion back on, then plug it in and heat it for about 40 minutes. 4. Put the white vinegar out from the water outlet behind the faucet and the water dispenser, then add water to the water dispenser, and repeat the above steps two to three times. 5. Wash the remaining vinegar in the water dispenser.

Hello dear, here's how. 1. White vinegar cleaning: First of all, disconnect the power of the water dispenser and clean the residual water in the water dispenser.

Remove the plastic seat cushion from the water dispenser that is stuck in the canister. Book 2, pour about 250ml of white vinegar into the water dispenser, and then turn on the faucet to verify that the white vinegar under the stupid celery has entered the water storage tank. 3. Put the plastic seat cushion back on, then plug it in and heat it for about 40 minutes.

4. Put the white vinegar out from the water outlet behind the faucet and the water dispenser, then add water to the water dispenser, and repeat the above steps two to three times. 5. Wash the remaining vinegar in the water dispenser.

Dear, I hope the above methods can help you.

Hello, the cleaning steps of the lower bucket water dispenser are as follows:1Cut off the power:

Disconnect the power supply of the lower bucket water dispenser before cleaning to ensure safety. 2.Drain the bucket:

Drain all the water in the bucket. 3.Dismantling buckets and tubing:

Disassemble parts such as buckets and hoses. 4.Cleaning buckets and tubing:

Clean buckets and pipes with soapy water or professional detergent. Use a soft-bristled brush or sponge to scrub the inside and outside of buckets and pipes. 5.

Rinse well: Rinse the bucket and hose with clean water to make sure both the detergent and dirt are thoroughly rinsed. 6.

Disinfection treatment: Use disinfectant to disinfect buckets and water pipes, and it is generally recommended to use disinfectants such as 84 disinfectant or bleaching powder. Pour the disinfectant solution into the bucket and leave it in full contact with all parts of the hose and bucket for at least 30 minutes.

7.Rinse well: Rinse buckets and hoses thoroughly with clean water, making sure both disinfectant and dirt are thoroughly rinsed.

8.Install parts: Reinstall parts such as cleaned buckets and pipes to the bottom bucket water dispenser.

9.Turn on the power: Make sure all the parts are installed, and then turn on the power of the lower bucket water dispenser for testing.

Notes:1Keep your hands clean when washing to avoid germs.

2.Cleaners and disinfectants should be read carefully before use, and should be used according to the instructions of Heqingzhao. 3.

Disinfectants need to be protected during use to avoid touching ** and eyes. 4.After washing, parts such as buckets and pipes should be dried or wiped dry to avoid bacterial growth.

1. Take down the drinking bucket and fill it with a small amount of rice or beans. The purpose is to increase the friction with the barrel wall when shaking.

2. Then add a small amount of water and white vinegar, the purpose is to make the moss and attachments quickly dissolve in the water when shaking.

3. Shake hard, during which you can add warm water to increase the effect of Lingzhou. The direction of the shake can be changed every once in a while.

4. After cleaning, rinse carefully with water!

5. If the effect is not good, you can repeat the cleaning many times!

6. There is also a special water dispenser bucket disinfectant for cleaning, which will be cleaner, but the chemical agent Wang Shen's thoughts are always not very reassuring.