Can a fully automatic washing machine break the washing machine if you have too much laundry and deh

It will break the washing machine, because if there are too many clothes in this automatic washing machine, the dehydration will cause the dehydration engine inside to be damaged, so the washing machine will not be able to be sent.

It will not break the washing machine, but it will cause damage to the washing machine, because when dehydrating, once you wait for the signal of the door opening, the brake will be activated, and the motor will be locked, no longer allowing you to spin, and the sudden locking will cause the most damage to the starter motor brake.

Too much clothing can cause the washing machine to get stuck. Because the washing machine has it, the volume specified by itself, and can, the weight of the one-time machine wash, if it is too heavy, it cannot be rotated, which may cause the washing machine to freeze. It is recommended that you turn off the machine first, and then take out part of the clothes, air dry part first, you can directly press the air drying operation mode, if the washing machine can still work, it means that it is not broken, but stuck.

Yes, putting too much laundry during laundry can cause wear and tear on the motor drive structure. Causing a fuse to break the fuse or burn the motor. You should call customer service to find the relevant personnel to check.

Under normal circumstances, it will not, but do not put too many clothes in the laundry at one time, it is easy to wash it not clean, put in the appropriate clothes, wash it cleanly and at the same time prolong the life of the washing machine.

There are too many clothes in a fully automatic washing machine, and if you dehydrate, you won't break the washing machine. Because the quality of the automatic washing machine is better, and the motor is better. Too much clothing will only affect his rotational speed. There will be no damage to the motor.

No. Dehydration will not damage the clothes, because when dehydrating, the dehydration bucket rotates at high speed, and if the washing machine is not stable, it will collide with the sound made by the washing machine shell, while the clothes will not come into contact with the outside inside the laundry bucket, so it will not damage the clothes.

The automatic washing machine will damage the washing machine if there are too many clothes, because the power of the dehydration is fixed, it can be less or more, and if it can't turn the direction more, it may damage the motor.

If you over-capacity laundry for a long time, of course, it will wear out the washing machine and shorten the service life of the washing machine, you can estimate the quality and weight of the clothes in this way, and put the clothes flat when you put them in the laundry bucket, only half of the bucket or more than a little bit, so that it can be cleaned cleanly and will not damage the machine.

I feel that the automatic washing machine washes too many clothes, and the water will damage the washing machine, because if it is too seriously dehydrated, the washing machine will be damaged, don't let him, the dehydration is too serious, if the dehydration is serious, go and repair it in time.

Generally speaking, there is no problem, the washing machine is designed to take into account the situation of putting a full bucket of clothes, it is recommended that the next time you use the washing machine, you can put a little clothes or let the washing machine idle once, observe it, if there is no problem, then continue to use it with confidence.

It's not broken, it's just that there are too many clothes, he can't drive, the engine power is a little small, so the washing machine won't rotate, it's not broken, just put less clothes next time.

It will not damage the washing machine, but there will be some wear and tear on the use of the washing machine, and the clothes should be cleaned in accordance with the requirements of the washing machine.

Hello, the washing machine will not be damaged, and the current mechanical equipment will be tested for various problems before leaving the factory. You can use it with confidence.

If you have too much clothes in an automatic washing machine, you can take the clothes out and spin them twice, too much clothes may cause the washing machine to be less dehydrated or not working.

If you have too many dehydrated clothes, you may break the washing machine if you can't take it with you.

Too much clothing causes the washing machine to spin from dehydration, which can cause damage to the washing machine. The next time you put less clothes to dehydrate, the worst result will be the engine, overloaded, and the generator will burn out.

Fully automatic washing machine it is, has its net content, in fact, when you buy a washing machine, the shopping guide will tell you that this is a few pounds of washing machine can carry how much capacity, well, it is recommended that you still don't make too many clothes, because too much, its speed can not be beaten, the weight will drag down its speed, a long time of speed can not reach, may remove your parts, so this year or don't use too many clothes, can, If there are too many clothes, you can wash them a second time or wash them twice.

There are too many clothes in the automatic washing machine, it is possible to damage the washing machine, no matter what kind of washing machine, it must be used correctly within its specified range.

Yes, how many kilograms can he put in his clothes? It's all written, that's the maximum carrying capacity, and if it's too much, he'll break the thing he threw at it.

Yes, a fully automatic washing machine will damage the washing machine if it frequently terminates its action during the rotation process, and it is recommended not to terminate it frequently during the washing process. Don't add a lot of clothes to it, as it's easier to damage the machine.

If there are too many clothes in a fully automatic washing machine, the water may make the washing machine cause certain impact and damage. Try to be semi-dry, not wet this kind of clothing to be able to work.

If you don't put too many clothes if you are dehydrated, the first thing is that it will not move, and then it may also cause the washing machine to burn off, you try to reduce the clothes a little to see if you can rotate, if you can't rotate, ask the master to repair it.

If there are too many clothes in the automatic washing machine, he will be overweight, because the automatic washing machine has a hint on it, how many kilograms can be washed? If you have too much water, dehydration will indeed break the washing machine, because if you can't load it, it will break.

Fully automatic washing machine Well, too much dehydration of clothes will damage the washing machine, this is possible, no matter what kind of washing machine, it must be used correctly within its specified range.

If too many clothes are dehydrated, it can cause the fully automatic washing machine to malfunction, and he may not be able to bring so many clothes to dehydrate.

There is no problem, because all the features he can use are necessary for him. Only dehydration does not do any harm to the machine, it just says that the dehydrated machine has been started, but in this case, for other originals, he did not start, not very fair, we sometimes find, oops, this has been dehydrated is not any effect, in fact, there is no effect, this is a normal bathing process. As long as it is not used frequently, if you use it frequently, you will find that it seems to be dehydrated, which is more likely to cause problems with aging workers, then of course, he uses more, of course, it will be easier to have problems.

No, but the washing machine has a lifespan, and the electrical and mechanical problems will increase after a certain age, and the maintenance cost will rise. The important thing to prolong life is to keep it dry and not to leave the washing machine in a damp place, such as the bathroom. Wipe dry with water.

Of course, it will last longer if you don't use it, but why buy it? Now electrical appliances are being replaced quickly, and they are depreciating when they are bought.

There should be no damage, be careful not to put the washing machine in a damp place, wipe it dry after use, if you don't use it for a long time, turn it on and run it once, and turn off the power in time after use, there will be no problem.

The automatic washing machine only uses dehydration without washing function, its water level switch will be in a state of inaction, and the related electrical and mechanical parts will not do laundry action, which has little impact on the washing machine itself, but if it is not used for a long time, it may make some parts (especially mechanical parts) malfunction. If you really don't want to use the laundry function, you can use it less, and it is recommended to run it fully automatically (all programs) once a month.

No, spinning is also part of the function of a fully automatic washing machine.

Comparatively speaking, fully automatic washing machines are only used for dehydration, which not only reduces wear and tear, but also saves water and electricity, and of course, it is more labor-intensive.

The specific operation steps of washing machine single dehydration are as follows:

Turn on the power switch.

Set the function selection knob to single offshift.

Open the door of the washing machine, put in the laundry that needs to be dehydrated, and try to distribute it evenly in the bucket as much as possible.

Close the glass door of the washing machine.

Press the Start pause button, and at this time, the machine will start to perform the single dehydration program.

It should be noted that the single dewatering is still a drainage procedure at first, so there is no response at the beginning of the machine drum, and only the sound of the drain valve is heard, and it will take about a minute before the rotating dewatering bucket will be started.

The washing machine is washed and normal, indicating that the motor and drainage circuit are working normally, and the reason for the failure may be that there is a problem with the dehydration system.

Solution: 1. Check whether the clutch lever on the electromagnet lever that controls the work of the deceleration clutch is loose, if it is loose, it will be unable to pull the clutch brake lever, and the clutch cannot be converted from the washing state to the dehydrated state.

2. When inspecting, push the electromagnet armature with your hand. Once the armature is fully pushed into the chute, check that the pawl is completely detached from the ratchet. Otherwise, the clutch is still in a cleaned state. At this point, simply screw in the adjustment screws so that the pawl is completely separated from the ratchet.

3. Check whether the fastening nut of the large pulley is loose. If it is loose, there will be a gap between the clutch sleeve and the outer shaft. During dehydration, the spring of the square wire clutch is partially embedded in the gap, which affects the transmission of the moment, resulting in abnormal dehydration.

4. Check the square wire clutch spring. The dewatering operation relies on the square wire clutch spring to transmit torque. If the square wire clutch spring is bad, it cannot be dehydrated.

Practice has proved that the abnormal dehydration caused by the problem of square wire clutch spring is more common. The inspection results are: the spring of the square wire clutch is broken and damaged, the test is carried out after replacing the new parts, the washing machine is dehydrated normally, and the fault is solved.

1. The scrubbing is in an unbalanced state when washing: when there are too many clothes, the scrubbing can not be adjusted to the balance, then the washing machine will take the initiative to adjust to a low speed and then constitute a poor dehydration effect, if it is this factor that constitutes the washing machine can not be dehydrated, then there is no need to worry too much: the number of clothes can be put less before washing the clothes, do not stuff too much for a while, to prevent the imbalance of washing.

And the impact of dehydration is not good for which grip is used.

2. The safety switch of the top cover of the washing machine is damaged: the washing machine is due to the mechanical movement of high-speed operation in the process of dehydration. In the process of dehydration, try not to open the top cover of the bucket to prevent damage to the top linkage switch, if the top cover of the washing machine is damaged, the washing machine can not be dehydrated.

3. The texture of the clothes: compared with summer, there are more varieties of clothing in winter, such as the strong water absorption of the tweed type of clothing, if you choose low-speed dehydration, it will constitute the illusion that the washing machine can not be dehydrated, so it is advocated that the washing and brushing with strong water absorption function should be dehydrated at high speed (ps: clothes can not be dehydrated at high speed).

4. Blockage of the washing machine drainage system: when the washing machine drainage system is blocked, the washing liquid in the water cylinder can not be discharged, when there is too much foam in the water cylinder, perhaps the washing liquid in the cylinder is difficult to drain for a while, the water level switch can not be reset, and the washing machine can not enter the dehydration program. If it is the factor that causes the washing machine to not be dehydrated, the question claims:

Remove the drain filter and clean it, flush the drain with water and remove debris from the drain valve.

5. The water level switch cannot be reset: the dehydration procedure of the washing machine starts under the condition that the water level switch is reset after the scrubbing liquid is discharged. If the drain level switch is damaged, dewatering is a procedure that needs to be carried out after the drain is completed, and if the water level switch is damaged, the dewatering process will not be accessible!

Solution: Contact the after-sales point.

1. Unbalanced clothes, if the clothes in the automatic washing machine are unbalanced, it may also lead to the automatic washing machine not being dehydrated. At this time, the automatic washing machine will automatically set a low speed, and the dehydration effect at this speed will be very poor, and people often mistakenly think that the washing machine is not dehydrated;

2. The top cover switch is damaged, the automatic washing machine is running at high speed when it is dehydrated, and the top cover cannot be opened at this time, so the top cover is switched by a link, and the top cover circuit will be automatically cut off as soon as the top cover is opened, and the dehydration function of the automatic washing machine will stop Bichun;

3. The drainage system is blocked, and when the automatic washing machine is working, it is necessary to check the drainage system of the automatic washing machine. If the drainage system is blocked, then the washing liquid in the water cylinder cannot be discharged, or because there is too much foam in the water cylinder, the water level switch cannot be reset, and the automatic washing machine cannot be dehydrated.

The water level switch is reset under the condition of starting. If the water level switch cannot be reset, the dehydration circuit is not turned on, and the washing machine is not dehydrated. When checking, open the upper cover of the washing machine, check whether the normally closed contact of the water level switch is connected, if the contact is not connected, the water level switch will not be reset.

You can also directly use the voltmeter to measure whether there is a 220V voltage between the No. 22 and No. 18 inserts. If there is no voltage, it means that the water level switch has not been reset unprecedentedly. Or turn the program controller to the water inlet program to see if the washing machine is flooded.

If there is no water, the water level switch is not reset, and the water level switch should be replaced. The second reason for the washing machine is not dehydrated: the drainage system is blocked.

The washing liquid in the water bowl cannot be discharged