How to remove the stickers on the sticker, what is the simple and fast way.

The following three methods are recommended.

Tear off the label and wipe the unpeeled part with an alcohol cotton pad, soften the glue that has dried and hardened, then use a paper towel to absorb the excess water, and finally wipe it off with an eraser.

Apply all kinds of skin care products such as creams and oils for the face to the trademark, and after a while, after the skin care products are applied to the trademark, they will come down with a light peel, and even the offset print will not be left.

Wet the towel and wipe it with some toothpaste.

You can use a blow dryer.

BAI machine, taking DU glass thermos cup as an example, the method of processing zhi is as follows: dao1, prepare a hair dryer to connect to the power source.

2. Turn on the hot air gear and blow on the sticker of the thermos cup for 5 minutes.

3. At this time, the adhesive of the sticker will become soft.

4. Take advantage of this effort to remove all the stickers.

5. After the treatment is completed, the stickers in the thermos cup will be removed.

On the top of the sticker with a hot blow to heat up for about 3 minutes, and then tear directly with your hand to tear off the plate can be torn down, if there is offset printing on it after tearing off the right, you can wipe it off with a hot rag.

There are many ways to remove stains from smooth items at home, and here are some things you can try:

1. Use soap and a little ammonia and turpentine to mix liquid, you can remove a lot of offset printing on glass.

2. Use transparent adhesive with good viscosity to repeatedly stick and tear, and you can remove some of the surface.

3. Wipe it off with a little dilute sodium water, or use paint thinner.

4. You can use a hair dryer to dry, and then you can scrape it gently.

5. Wipe with a cotton swab dipped in nail polish remover.

6. Wipe the wind oil essence.

7. Use a special detergent or sneaker detergent to wipe it.

8. Use the 4B eraser for drawing to be very soft, and you can erase it with the Korean eraser.

9. If the traces that have been left for a long time have hardened, you can use a hot towel to soften it before wiping it.

First wet it with water, and then tear off the sticker, in fact, the hardest thing to remove is the layer of glue inside, so I have to use my nails a little bit, in fact, it's nothing like that, thank you, I hope it helps you.

I have experience with this! Use a lighter to burn the sticker, you can easily tear it off, I hope it will help you!!

Soak it with water first, and then brush it with a wire brush.

1. You can use a hair dryer to dry, and remove the sticker by heating, if there is a small amount of residue, you can gently deduct it.

2. Coat with wind oil, solvent oil, gasoline, kerosene, etc., and then wipe with a cotton swab.

3. Use a drawing eraser, which takes a relatively long time, and you should wipe patiently and meticulously little by little until all the stickers are wiped clean.

4. Use a special detergent or sneaker detergent to wipe it.

5. Wipe repeatedly with a cotton swab dipped in nail polish remover.

1. In some cases, you can try to use your fingers to "pinch the label residue viscose into a small ball". Check how sticky the label residue is before using it, and if it's sticky, don't try this method as it will only make the situation worse.

2. The blade method uses the blade to gently scrape off the sticker glue, which can easily remove the sticker glue, but will leave some scratches on your plastic cup.

3. The hair dryer can soften the sticker glue on the plastic cup, use the hair dryer to blow the sticker, and after the glue under the sticker softens, you can tear it off directly.

4. Hard plastic sheets are common in life such as recharge cards, game cards, membership cards, etc., the method is similar to the blade method, but the hardness of the plastic sheet is small, and the damage to the plastic cup is relatively small when scraping the sticker glue.

<>1. Remove the sticker eraser on the upper branch of the cup.

2. Many times, we will find that after the label is torn off halfway, there is still some part of it that has not been removed, and there are sticky marks on the items. At this time, we can use the eraser to wipe this piece repeatedly, blowing away the eraser pieces while wiping, and gradually, you will find that the sticky sticker has disappeared with the eraser foam.

1. Hot water removal method. This method is used to remove labels from glass bottles such as salad dressing bottles, jam bottles, and canned bottles. Take a small basin, fill it with hot water, put the bottle you want to remove the label in the hot water basin, let the water submerge the label, and let it stand for 20 minutes, and then you will find that the label can be removed cleanly after soaking in hot water and wiping it gently.

2. Hair dryer removal method. This method is applicable to price tags and trademarks that are attached to heat-resistant cups, dinner plates, stainless steel utensils, etc. Open the hot air gear of the hair dryer, use the hair dryer to blow the trademark for 5 minutes, the trademark will become hot, and the glue under the trademark will be dried and lifted naturally.

3. Lighter burning method. This method is applicable to price tags and trademarks affixed to heat-resistant items such as drinking glasses, dinner plates, and stainless steel utensils. Use a lighter to point the logo of the article and burn the trademark with a flame until it is burned. After that, wipe the blackened part with a cloth.