How to wash off the non sticky glue on the security door

Blanch with hot water and blow with a hair dryer.

What you need to prepare: rag, xylene, shovel.

Buy a bottle of room door protector on ** and you can no longer stick to a small advertisement.

1. Use a hair dryer to blow on the self-adhesive, which is easy to uncover after heating;

2. Wash with Tianna water.

1. The method of removing the adhesive on the anti-theft door is: first use a shovel to shovel up some of the adhesive on the anti-theft door, then tear off the adhesive shoveled up by hand, and then pour the xylene on the dry towel for later use, and finally wipe the glue stains on the anti-theft door with a rag soaked in xylene.

2. The full name of the anti-theft door is "anti-theft security door", which has both anti-theft and security performance. According to the provisions of the "General Technical Conditions for Anti-theft Security Doors", qualified anti-theft doors cannot be pried open within 15 minutes by using ordinary hand tools such as chisels, screwdrivers, crowbars and portable power tools such as hand drills, or open an opening of 615 square millimeters on the door leaf, or open an opening of 38 square millimeters in a semicircle of 150 square millimeters of locking points.

The adhesive on the security door can be soaked in hot water, scraped with a scraper or blown away by hot air.

Method 1: Soak in hot water, pour hot water on the viscose, soften the glue on the viscose, and then scrape off the softened viscose with a scraper, be careful not to use too much force so as not to damage the surface of the security door.

Method 2: Use a scraper to gently scrape on the surface of the adhesive, and scrape slowly, little by little, so as not to damage the surface.

Method 3: Use hot air to blow, use the hot air blower on the adhesive, which can soften the adhesive high, and then use a scraper to scrape off the softened adhesive, but be careful not to use too much force.

<> the glue on the security door can be wiped off with air oil, blown with an electric hair dryer, wet paper towels, erased with an eraser or dish soap. First, rub it on the glue with wind oil essence, and when the double-sided tape is loose, gently wipe it with a paper towel. Second, use a small water blower to blow hot air on the glue, bake the glue hot, and the glue will automatically fall off.

Third, soak the paper towel in vinegar, and after it is sufficient, stick it on the glue to let the glue fully absorb the companion spike, and that's it. Fourth, rub the glue repeatedly with an eraser until it is clean. Fifth, pour the dish soap into the water, then dip it with an old toothbrush, and wipe it with reeds on the rubber tree.

A good anti-theft door is pasted with self-adhesive, the self-adhesive paste is simple, and it is not so easy to remove, so it is very distressing, how to remove the glue on the anti-theft door?

1. Clean with an eraser: The glue on the anti-theft door can be wiped clean with an eraser, and the eraser itself is an item with a certain ability to decontaminate, it can not only be used to erase pencil handwriting. In the case that there is not much glue on the security door, you can use the eraser to wipe it with a little force, and the glue on it will fall off in the form of a black strip.

2. Detergent cleaning: If the adhesive of the anti-theft door is large and the area that needs to be removed is also relatively large, it is recommended to use detergent to deal with it. In addition to the dish soap can help clean the bowl more cleanly, use dish soap mixed with water, and then use a brush dipped in dish soap dilution to scrub the anti-theft door, and you can also remove the glue brush on it.

3. Use a hair dryer: The hair dryer is a must-have item for most people at home, turn on the hair dryer until the hot air blows on the glue on the anti-theft door, and after the glue on it is hot, the glue on it will slowly fall off. It should be noted that it is best to choose a low-power hair dryer, or adjust it to a medium-range hot air, otherwise it may damage the wooden door.

The above is an introduction to how to remove the glue on the security door, I hope it will be useful to you!

The glue marks on the security door can be removed by the following three methods:

1. The traces of tape on the anti-theft door can be eliminated with nail polish remover or nail scarf. Use a cotton swab or rag to dip some nail remover, and then wipe the tape traces on the anti-theft door and the key, wait for the tape traces to be completely wiped off, and then wipe the anti-theft door with water.

2. You can also mix soap, a little ammonia and turpentine, and then evenly apply the mixture to the location of the tape traces, wait for the traces to dissolve, and wipe them off with a rag.

3. If you think that the above two methods are more troublesome, you can also use tape to remove the traces on the anti-theft door, choose a transparent tape with good stickiness, and then repeatedly stick and tear the tape traces on the anti-theft door until the tape traces are removed.

What are the types of security doors

1. The types of anti-theft doors can be divided into several types, among which steel anti-theft doors are the most widely used, with the advantages of durability and affordability; However, the steel security door has a single style and a general decorative effect. The styles of steel and wood security doors are diverse, suitable for a variety of decoration styles, and also have the advantages of high strength, durability and durability, and not easy to crack; However, the steel and wood doors are bulky and not easy to maintain.

2. If we divide the anti-theft door according to the anti-theft level, the anti-theft door can be divided into four types: A, B, C, and D. Among them, the Class A security door has the highest anti-theft level, and according to the relevant regulations, its anti-vandal opening time is usually not less than 30 minutes. Class D security doors have the lowest anti-theft level, and their anti-vandal opening time is generally not less than 6 minutes.