The solid wood floor at home is seriously worn, how to replace it?

This is actually very simple, now furniture beauticians are available in any city, if you can't find a shop that can sell building materials to ask, you can also search on the Internet, repair it basically can't see the traces of repair, and the effect of saving money is good. Carpeting on top will do, and if it is laminate flooring, it is best to replace it again. Hope it helps.

Just lay a layer of wooden flooring, and it will be very easy to change at that time. Simplifying the subject's question should be how to repair the floor at the lowest cost, since it is an old house and serious wear and tear, I think it should be laminate flooring.

If after a few years of use, the wear-resistant layer of the solid wood floor at home is more seriously damaged, clean up the base layer, polish it flat, and repaint it on the solid wood floor with the same color or polyester paint of similar color number, the characteristics of solid wood are easy to deform by moisture (the moisture content is too high), and it will crack when exposed to the sun (the board is too dry), based on such characteristics, the solid wood floor should be maintained from the material characteristics and product attributes, and the author shares the experience as follows. It is recommended to wax at least twice a year. There are two options for refurbishment:

One is to renovate at home, the advantage is high efficiency and low cost, the disadvantage is that there is noise and health problems, the second is the floor demolition and return to the factory for renovation, the advantage is that the quality of renovation is not asked, and the disadvantage is that the process is cumbersome and costly! When it comes to solid wood flooring, everyone should be familiar with it. As a high-end decoration material, solid wood flooring has entered thousands of households.

However, although the solid wood floor is beautiful, it needs to be carefully maintained.

It is more reliable to dismantle and reorganize, mainly to prevent damage that may be caused by abrasion to the solid wood floor. When moving furniture on the solid wood floor in the room, handle it with care and do not mop it. Then there is fire prevention and anti-corrosion.

Irregular construction waxing, beauty maintenance. Be sure to wipe the soles of your shoes before entering the house from the outside to avoid the sand and gravel particles on the soles of your shoes from entering the room, as these fine particles can easily cause scratches on the floor. It is also necessary to clean and vacuum frequently.

I think you can ask the workers to help you make a plan, whether to knock it all out and re-paste it or whatever, they are very professional and can solve the problem for you very well.

When you replace it, you can remove the wooden planks one by one, and then inlay the newly bought wooden boards again.

I think you can find a professional master to help you change, because the professional master knows how to change the place with solid wood.

It is possible to plane all these wooden floors and reinstall them, because the wear and tear are more serious and cannot be repaired.

If the solid wood floor in the home is seriously worn, then I recommend that you can remove the whole piece and then buy a new one and install it, because if the floor is seriously worn, it will affect the overall appearance.

It is recommended that you prepare special tools such as soft toothbrushes, water sandpapers, and amethyst floor oil before starting to work before starting to work. For the damaged wooden floor, you can slightly grind the surface layer with water sandpaper and wet soap, but do not grind too deeply, do not wet the solid wood dining table top, and then wipe it with a dry rag. If you want to replay amethyst, you must first completely grind off the old crystal, absorb the wood residue and dust, completely wipe off the old wood chaff with a dry wet rag, and after the wooden floor is completely dry, use a soft toothbrush to sweep the amethyst oil evenly on the wooden floor, and wait for a few hours before it will be completely dried; If bubbles occur, you can use fine sandpaper to gently grind them off, and the actual effect is better in dry climate.

Solid wood flooring damage Maintenance tips--- keep the floor dry, clean, and prevent a lot of water from touching. It is not allowed to use edible alkali, soap and other corrosive liquids to clean to prevent damage to the paint film, and can be scrubbed with a wrung out cotton mop, and can not be scrubbed with wet mops, car gasoline, flammable materials and continuous high temperature liquids.

Solid wood flooring damage Maintenance tips Waxing every once in a while, depending on the smoothness of the floor paint. The way to do this is to wipe the wooden floor clean with an air-dried towel and wax it. It is necessary to evenly rub the surface of the floor tiles and let them "soak" them, and after they are slightly dry, scrub them back and forth on the floor tiles with a soft rag until they are smooth and transparent.

Solid wood flooring damage Maintenance tipsIf you accidentally refill the water or neglect the water on the road, be sure to wipe it off immediately with a dry soft rag. Do not expose the wood floor to sunlight or bake it in a heated oven immediately after wiping it to prevent it from drying out too quickly and cracking the wooden floor. Solid wood floor damage Maintenance tips do not need to throw cigarette butts or matchsticks and other fire sources on the floor tiles to prevent burning the surface of the wood floor; Prevents sharp, sharp objects from scratches and long-term stress of heavy objects.

Generally speaking, use a dust collector to suck the dust on the road once a week to avoid the dust falling into the gap and breeding germs; For most of the year, you must wax once. In addition, wooden floors are especially not waterproof, so be sure to pay attention to moisture protection!

To repair properly, do not wash the wooden floor directly with water, you can also replace it with other wooden floors; You can wax the surface of the wooden floor, and when grinding the floor, you need to ask a professional team to polish it, or you can lay a carpet on the wooden floor.

Waxing the wooden floor plays a role in reducing friction, which can extend the service life of the wooden floor. For about 1 month every day, after cleaning the floor, manually wax the floor.

Try not to let the wooden floor come into contact with water, do not pull tables and chairs back and forth on the wooden floor, do not let the wooden floor come into contact with some oil stains, and clean and maintain the wooden floor regularly.

In real life, many people choose to pave with solid wood flooring, because the effect of solid wood flooring is beautiful and comfortable to the touch, but it also brings some troubles to users, especially the problem of floor wear, which we take stock belowHardwood floors are wornFix it.

Fix 1: Apply essential oil to the floor

If the solid wood floor has only minor wear, it is recommended to treat it with floor oil, which can be worn out and the color will not deepen, which is equivalent to adding a protective layer, and this method is limited to minor wear and tear.

Fix 2: Use polishing wax

If there is some wear or scratch on the surface of the floor, and the paint film on the surface of the floor is not damaged, it can be polished with polishing wax, which can protect the original shine of the floor and prevent further damage to the damaged area.

Fix 3: Paint

If the damage to the solid wood floor is more serious, resulting in the damage or whiteness of the paint film, it is necessary to use the method of painting, the method is as follows: use No. 400 water sandpaper dipped in soapy water to polish and wipe clean, wait for dry after the color is replenished, wait until the color is dry and then paint, dry for 24 hours, polish with No. 400 water sandpaper and polish with wax.

Fix 4: Find a professional maintenance personnel

If the floor is damaged in a large area, Jian Oak Li Yi still directly finds a professional maintenance personnel to renovate or replace.

Solid wood flooring in the process of use, it is inevitable that there will be wear and tear, if the degree of wear is low, you can choose the above methods to repair, and if there is a large area of damage, it is recommended to find professional maintenance personnel.

The life of the wood floor depends on the daily maintenance, if the home is underfloor heating, the wood floor is easy to expand and contract, and the life will naturally be shortened. Look at what material is made. Some of them go bad when they touch the water.

Multi-layer solid wood and log wood are better than the other way around, even tiles or other stone floors can't withstand such a large amount of water soaking! In addition, it is better to have children under the age of 3 at home, because children like to climb or squat on the ground to play, and the cork floor is relatively not too cold and will not ice the child.

The material of the <> cork floor is processed from the bark of the cork oak oak in the Qinling Mountains, and the bark of the cork oak oak has the ability to regenerate, it is more environmentally friendly, sound insulation and moisture-proof compared with the solid wood floor, the cork floor is soft, quiet, comfortable and wear-resistant, and it can also have a good cushioning function if you accidentally fall. First of all, if there is damage, it should be repaired locally to prevent the damage surface from becoming larger, and secondly, it is necessary to prevent thermal damage, and do not put something too high on it, so as not to burn the film on the surface. Then you should put a dust mat at the door, so as not to bring sand and other grains to it, which will grind out scratches.

Cork flooring has the characteristics of being healthy, soft, comfortable, good on the feet and anti-fatigue. Each cork cell is a closed air sac, and when exposed to external pressure, the cell shrinks, the internal pressure rises, and when the pressure is lost, the air pressure inside the cell restores the cell to its original state. No matter what kind of wooden floor, as long as it does not enter the water, it can be used for a long time, except for some poor quality for a long time, but after a long time, some floors will be deformed.

Softness is one of the main characteristics of cork, but by "soft" we mean that it is flexible, and the floor itself is not soft. Because the cell structure of cork is like a honeycomb, there are closed air sacs in the cells, and the cells will shrink and become smaller when exposed to external pressure, and return to their original state when the pressure is lost. Wood flooring is affected by environmental factors, and it is necessary to pay attention to many problems, and the durability is not as durable as the tiles.

You should change the floor or put a layer of wallpaper on the floor, so that it is very convenient and does not cause wear and tear.

Lay another layer of floor tiles on top of the wooden floor, so that it is not afraid of wear and tear, or brush another layer of glue on the wooden floor to play a protective role.

You can go to the place that sells wood flooring to buy some nutrient solution or repair solution, which can also be placed at home and used at any time when it is worn out.

You can buy some floor brightener to wipe the floor, usually maintain the floor, do not push and pull things back and forth on the floor, so as not to cause damage to the floor.

You can spread a blanket on the wooden floor so that it doesn't wear out, and it's especially convenient to play with your child on the floor.

Wear and tear on wooden floors is a common problem, which is mainly caused by frequent walking and friction. However, wooden floor wear can be repaired, and here are some ways to deal with it:

1.Repair small abrasions: If the wear is minor and only partially damaged, it can be smoothed with sandpaper. Then, use the board repair glue to attach the wooden blocks to it, wait for it to dry, and then smooth the surface.

2.Waxing: Using wax to repair wear and tear on the floor is a common method. Choose a hard wax, coat the worn areas on the floor, and wait for it to dry before polishing it with a polisher.

3.Repaint: When the wear and tear of the floor surface is severe, it can be repainted, which can effectively repair the wear. First, use sandpaper to scrub the surface, and then paint the wooden floor with a new color.

4.Replace the floor: If the wear is too severe and the repair is ineffective, the floor can only be replaced, which should take into account whether there is a certain budget for the calendar. If you want to replace the bright wheel flooring, you can choose the same color and material as the old flooring and ask a professional to help install it.

In short, wooden flooring wear and tear does not necessarily have to be replaced. If the degree of wear is not severe, it can be repaired by waxing or repainting. If the wear and tear is severe, replacing the floor is the best option.

It is important to repair and maintain it in time to prolong the life of the floor.

1. Floor specifications, from the perspective of wood board stability, the smaller the floor size, the better the deformation resistance, for which it is necessary to choose the shorter and narrower.

The solid wood floor minimizes the bending, twisting, scooping, shrinking, arching and other phenomena of the solid wood floor. Flooring experts believe that the short one is better than the long one.

Good; The narrow one is better than the wide, and it is cheap. But now the wide board is popular in the market, and the wide plate is more beautiful and larger than the narrow board.

square, the texture is relaxed, and the pattern is complete, but the qualified wide plate must go through strict material selection and quality acceptance. Usually, wide floor back.

The surface should have an anti-variation draft shelter groove, and the depth of the groove should be one-third of the thickness of the floor. If it is used for floor heating, it should be thin and not thick.

Generally 8-12mm thick.

2. The moisture content of the floor, the moisture content of the wooden floor is very tight. The moisture content of the purchased flooring must be the same as the local equilibrium moisture content.

Wait. When buying a floor, be sure to measure the moisture content, if you don't have a moisture content tester, don't buy its board. Method for determining equilibrium moisture content.

It is very simple, in the exhibition hall, first measure the moisture content of the purchased varieties, and then unpack the boxes to test the moisture content of the purchased varieties of wood floors, if the two contain water.

If the rate is only +1%--2%, it is a qualified product.

3. Floor material, observe with your eyes whether the floor is the same material, and whether the board surface is cracked, decayed, peeled, dead joints, and insects.

Eye, blue staining and other material defects. Usually there is no need to be too strict about color differences, joints, textures, etc., which are the natural properties of wood. Precisely.

The color difference and the changing natural texture show the natural color of the solid wood floor, which is the current international home decoration pursuit.

Still. 4. Processing accuracy, generally after unpacking, about 10 pieces of wooden flooring can be taken out and assembled with bare hands, and the processing quality can be seen by hand to see that the processing quality is fine.

degree, finish, whether it is smooth and smooth, whether the tenon and groove fit, installation gap, anti-denaturation groove and other assembling are tightly fitted. Observe the enterprise.

Mouth occlusion, assembly gap, height difference between adjacent plates, if strictly closed, there is no obvious height difference in the feel.

5. After flooring, there are many wood floor manufacturers on the market, and the quality is uneven.

board, these brand manufacturers will provide perfect after-sales service, and there is a certain warranty period. It can save a lot of worry.