What to do if the solid wood floor is worn off, and what to do if the wooden floor is worn

It's okay, the paper should only have scratches on the surface of the paint film on the wooden floor, if it is not very deep, just maintain it, it will cover these scratches, which is the most convenient and cost-effective way. But don't use floor wax. There are water-based products on the market for cleaning and maintenance.

If the scratches are deep, you can do a shallow renovation, remove the paint from the surface and repaint. Try to use water-based, environmentally friendly, wear-resistant and wear-resistant special paint for wood flooring.

But the best thing to say is to send a ** to take a look, and I can't make too specific judgments now.

There is no way, I can only replace it partially.

Wear and tear on wooden floors is a common problem, which is mainly caused by frequent walking and friction. However, wooden floors can be repaired if they are worn out, and here are some ways to deal with them:

1.Repair small abrasions: If the wear is minor and only partially damaged, it can be smoothed with sandpaper. Then, use the board repair glue to attach the wooden blocks to it, wait for it to dry, and then smooth the surface.

2.Waxing: Using wax to repair wear and tear on the floor is a common method. Choose a hard wax, coat the worn areas on the floor, and wait for it to dry before polishing it with a polisher.

3.Repaint: When the wear and tear of the floor surface is severe, it can be repainted, which can effectively repair the wear. First, use sandpaper to scrub the surface, and then paint the wooden floor with a new color.

4.Replace the floor: If the wear is too severe and the repair is ineffective, you can only replace the floor, which should take into account whether there is a certain budget. If you want to replace the flooring, you can choose the same color and material as the old flooring and ask a professional to help install it.

In short, it is not necessary to replace the wooden floor grinding chain that is damaged by the early call. If the degree of wear is not severe, it can be repaired by waxing or repainting. If the wear and tear is severe, replacing the floor is the best option.

It is important to repair and maintain it in time to prolong the life of the floor.

Wood floor sanding is a way to make the surface of the floor smoother, smoother, and more beautiful. But if it is not handled properly, it can lead to problems such as floor breakage, cracking, contamination, etc. Here are some things you should pay attention to when dealing with wood floor sanding:

1.Clean the floor: Before sanding, the floor should be cleaned to ensure that the surface is clean and free of dust and debris. Dust can be removed with tools such as a vacuum cleaner or mop.

2.Consider the type of flooring: Different types of flooring require different treatments. Solid wood flooring, laminate flooring and plywood flooring have their own characteristics and uses. Before sanding, you should understand the different types of flooring and choose the right sanding method.

3.Use the right tools: Choose the right tools, including sanders, sandpaper, and polishing pads. Different flooring types require different grinding heads and sandpaper sizes, so you should be aware of this information before using it.

4.Coarse grinding and fine grinding: Ground grinding usually requires two steps, coarse grinding and then fine grinding. Coarse grinding is done to remove surface imperfections and unevenness, and fine grinding is done to make the surface smoother. During the process of bridge tung grinding, be careful not to overgrind the head so as not to damage the floor.

5.Polishing: After completing the coarse and fine grinding, polishing should be done. Polishing can make the floor smoother, while also removing fine scratches and stains from the surface.

6.Make sure the room is ventilated: A lot of dust and odors are generated when sanding the floor, so you should make sure that the room is well ventilated. It is possible to open windows or use devices such as air purifiers.

In short, for the sanding requirements of wood flooring, we need to carefully select and use appropriate tools and abrasives to ensure that the floor surface is smooth and beautiful, while keeping the room well ventilated.

In real life, many people choose to pave with solid wood flooring, because the effect of solid wood flooring is beautiful and comfortable to the touch, but it also brings some troubles to users, especially the problem of floor wear, which we take stock belowHardwood floors are wornFix it.

Fix 1: Apply essential oil to the floor

If the solid wood floor has only minor wear, it is recommended to treat it with floor oil, which can be worn out and the color will not deepen, which is equivalent to adding a protective layer, and this method is limited to minor wear and tear.

Fix 2: Use polishing wax

If there is some wear or scratch on the surface of the floor, and the paint film on the surface of the floor is not damaged, it can be polished with polishing wax, which can protect the original shine of the floor and prevent further damage to the damaged area.

Fix 3: Paint

If the damage to the solid wood floor is more serious, resulting in the damage or whiteness of the paint film, it is necessary to use the method of painting, the method is as follows: use No. 400 water sandpaper dipped in soapy water to polish and wipe clean, wait for dry after the color is replenished, wait until the color is dry and then paint, dry for 24 hours, polish with No. 400 water sandpaper and polish with wax.

Fix 4: Find a professional maintenance personnel

If the floor is damaged in a large area, Jian Oak Li Yi still directly finds a professional maintenance personnel to renovate or replace.

Solid wood flooring in the process of use, it is inevitable that there will be wear and tear, if the degree of wear is low, you can choose the above methods to repair, and if there is a large area of damage, it is recommended to find professional maintenance personnel.

At present, the repair methods of the floor can be roughly divided into three types: paint repair, local damage, reinstallation repair, and overall reinstallation repair. There are pros and cons.