How to remove the rust from the pot, how to remove the rust from the iron pot

Updated on vogue 2024-07-13
14 answers
  1. Anonymous users2024-02-12

    If the iron pot is rusty, it can be brushed off by the following methods:

    1. Pour 20 grams of vinegar into a hot iron pot, scrub with a hard brush while burning, and wash with water after pouring off the dirty vinegar.

    2. Put a little salt in the pot, fry the yellow and wipe the pot, then brush the pot, then put water and 1 tablespoon of oil to boil and pour it off, and wash the pot.

    3. Don't wash it too clean every time you use it, and leave some oil to prevent rust. You can heat the iron pot first, then pour in a little oil, smooth it evenly with a spatula, then turn off the heat, and when you use it the next day, rinse it with water.

    4. Rust removal and rust prevention tips radish and potato peel rust removal. If the iron pot or kitchen knife is rusty, you can easily remove the rust by dipping the cut potato skin or radish skin with a little fine sand and vigorously wiping the iron pot and knife surface.

    5. Tea residue rust prevention. Iron pots are prone to rust spots when damp, and it is difficult to remove. You can wipe the iron pot with a gauze bag filled with tea residue to prevent the iron pot from rusting.

    6. Rice water.

    Antirust. If iron cooking utensils such as kitchen knives, spatulas, and iron spoons are cleaned and immersed in rice washing water with a high concentration, they can prevent rust spots from forming more quickly, because the rice washing water will add a protective film to them.

  2. Anonymous users2024-02-11

    There are several ways to remove rust from the iron pot, using animal oil to apply all the iron pot to remove the rust; Boiling of sour vinegar removes rust; Wash the iron pot with rice water to remove rust; The steel wool ball can be directly wiped to test the rust, but this method is more difficult to do; Common fruit skins such as pineapple peels can remove rust;

  3. Anonymous users2024-02-10

    If it's a new pot that you bought newly, brush it with washing water first. Then boil a pot of hot water and boil and sterilize. Then rub it well with a large amount of oil. Grill over the fire. In this way, you can use it for stir-frying on a regular basis. The rust of the iron pot will be removed.

  4. Anonymous users2024-02-09

    There are those that are sold online that specialize in removing rust, which are very cheap and easy to use.

  5. Anonymous users2024-02-08

    You can take toothpaste, and remove it once.

  6. Anonymous users2024-02-07

    【Iron pot rust removal】

    Ingredients: water, white vinegar, cooking oil.

    Steps]:

    1: First prepare a large basin, add 50ml of white vinegar, then pour half a basin of water and stir well.

    【Iron pot rust removal】2: Turn on the high fire to put the iron pot on it to burn red, the purpose of this step is to use high temperature to remove the rust on the surface of the iron pot, the general family stove needs to be burned for a while, about 10-15 minutes to burn red, after the red is burned thoroughly, add an appropriate amount of water to clean it several times.

    3: Pour out the water for washing the pot, heat the pot again, pour the stirred white vinegar water, and then brush the casserole for 3 minutes, the purpose of this step is to use the rust residue of white vinegar corrosion, after brushing and cleaning, the white vinegar water can be poured out.

    4: Let's heat the pot again, after it is hot, add an appropriate amount of cooking oil, dip the whole pot, pour out the hot oil, add an appropriate amount of water to scrub clean.

    【Iron pot rust removal】5: According to the process of step 4, do it twice repeatedly, clean all the rust residue in the pot, and finally wipe the bottom of the pot with an appropriate amount of cooking oil to scrub it clean.

  7. Anonymous users2024-02-06

    Pig iron pots are traditional iron pots that are very popular. But it has a disadvantage that it is easy to produce a little yellow rust after cooking. If it is specially used for cooking, wash it with warm water after cooking, commonly known as it"soup pot", so that the oil film that naturally forms during use will not be removed and will not rust!

  8. Anonymous users2024-02-05

    Hello recommends a few methods for you: First, heat the iron pot slightly with vinegar first, and then turn off the heat. Then use a rag to dip some vinegar, and then use a rag to wipe the rusty area, and rub the severely rusted area several times until there is no rust.

    The second is to use the method of washing rice water for a long time, so first soak it in the rice washing water when cooking (of course, the soaking time should be longer). Then heat the rice water and boil it slowly, rub it slowly with a steel wool ball during the burning process, wipe the rust on the pot and then slowly wait for the rice water to boil, and then wait for it to cool and pour it out. Finally, rinse with clean water.

    The third is to use a steel wool ball to slowly wipe off the rust on the iron pot with a steel wool ball, and then clean the iron pot. In order to prevent rust from regrowing, pour a small amount of oil into the pot and heat it, let the oil coat all over the pan, continue to heat until it smokes, and repeat it several times.

    Fourth, the method of using sandpaper or whetstone is relatively simple, you only need to use sandpaper or whetstone to grind off the rust on the iron pot, and then rinse it with water.

  9. Anonymous users2024-02-04

    Water: Boil a pot of water in a pot, after the water boils, wipe it a few times with a dish towel and the rust will disappear. Vinegar:

    Vinegar can not only kill viruses, but the acetic acid contained in it can also chemically react with the rust on the iron pot, causing it to fall off or disappear. Sandpaper: Wipe with sandpaper, the surface of the friction paper is very rough, wipe the rust a few times, and the rust will fall.

    Dish soap: Wash the pot with dish soap, which contains acidic substances that can react chemically with rust to remove rust. <

    1. Water: Boil a pot of water in a pot, after the water boils, wipe it a few times with a dish towel, and the rust will disappear.

    2. Vinegar: Vinegar can not only kill viruses, but also the acetic acid contained in it can also react chemically with the rust on the iron pot to make it fall off or disappear.

    3. Frosted paper: Wipe with sandpaper, the surface of the friction paper is very rough, wipe the rust a few times, and the rust will fall.

    4. Detergent: Wash the pot with detergent, which contains acidic substances, which can react chemically with rust to remove rust.

  10. Anonymous users2024-02-03

    The iron pot is repeatedly rusted, and it can be cleaned with baking soda and white vinegar, heat the cleaned pot, then add lard, and then wipe the bottom of the pot with ginger to no longer be afraid of rust in the iron pot.

    First of all, we add an appropriate amount of baking soda to the iron pot, and then pour in white vinegar, baking soda and white vinegar will react when mixed together, so that it can soak for 5 minutes, squeeze in some dish soap after soaking for 5 minutes, and then turn on low heat to heat, and then use a dishwashing brush to scrub the iron pot while heating over low heat, turn off the fire after the temperature is suitable to avoid scalding your hands, this method removes the rust of the iron pot quickly, and the decontamination ability is also strong.

    Baking soda can react with white vinegar foam, baking soda has a strong cleaning effect, white vinegar can soften the rust at the bottom of the pot, after the rust is cleaned, you should also pay attention to maintenance, heat the cleaned pot, then add lard, and then wipe the bottom of the pot with ginger, which can make the iron pot become a non-stick pan, and the oil can maintain the iron pot and prolong the service life of the iron pot, so that the treated iron pot is no longer afraid of rust.

    Maintain the iron pot:

    1. Remove the burnt

    If there is charring on the iron pot, soak the iron pot in warm water, smear it with baking soda, and then brush it clean with a steel wool ball.

    2. Daily maintenance method:

    If the iron pot is left for a long time and there is a peculiar smell, you can use leftover tea leaves to remove the smell. In fact, the iron pot does not need to be cleaned too cleanly, and the oil can prevent the iron pot from rusting. It is best to cook over medium-low heat.

  11. Anonymous users2024-02-02

    Tools Raw materials

    Steel wool, dish soap, kitchen paper, salt.

    1. First of all, don't clean the rusty iron pot, put it on the gas stove, turn on the medium heat and burn all the circles of the iron pot, this step is mainly to remove the grease around the iron pot. Each place should be burned for a while, and after burning until the grease is obviously peeling, it means that it is almost the same. Don't burn the handle, because it's glue and it's easy to burn.

    After the iron pot is boiled, burn the bottom of the pot for about three or four minutes, turn off the heat, and let the iron pot cool until warm.

    2. Add a little dish soap and some white vinegar to the pot after cooling, and turn the iron pot to let all the pots get white vinegar. White vinegar can very easily remove rust from the pan, and dish soap is mainly to remove grease. Set aside for 10 minutes to allow the white vinegar to react with the rust.

    After 10 minutes, it will be very easy to gently wipe the rust off with your hands, and then clean it again.

    3. Wash the iron pot with a steel wool ball, so that the rust in the pot can be better washed off. Then continue to scrub the iron pot with dish soap for the second time, this time instead of using steel wool balls, just wipe with an ordinary sponge. As you can see, the foam at this time is rusty yellow, indicating that there is still rust remaining, so it should be scrubbed for a while.

    Wash until the water in the pot turns white, indicating that there is no rust.

    4. Put the cleaned iron pot on the gas stove, boil the water in the pot over high heat, then turn the heat to low and pour in some salt. Prepare some kitchen paper, fold it into thick pieces, press the kitchen paper with your hands, and rub the salt all over the iron pan, this step is mainly to remove the rust smell of the iron pan.

    5. Apply for about five or six minutes, then pour out the salt and do not clean the iron pot. Add a little vegetable oil, heat the oil and coat the walls of the pan, this step is mainly to make the iron pan smoother. In this way, the iron pot is not easy to stick to the pan, and because there is a layer of oil film, the iron pot is not easy to regenerate rust.

    Let it sit for an hour to allow the pan to absorb the oil.

    After an hour, wash the pot again with dish soap and boil the water in the pot again. Put a little lard and smear the iron pan again. Because animal oil has better adsorption than vegetable oil, the iron pan is smeared with lard for the second time.

    If you have pork skin at home, you can directly use the grease on the pig skin to coat the iron pot, and the lard can play a strengthening role. Oil is used to isolate oxygen, so that the iron pan is not easy to rust and does not stick easily.

  12. Anonymous users2024-02-01

    1. Remove with white vinegar and baking soda

    Vinegar and baking soda are commonly used cleaning artifacts in kitchens, and they can also be used to remove rust. Prepare half a bowl of white vinegar, add baking soda to it, stir well, pour the stirred white vinegar baking soda into the rusty iron pot, after a while you will find that the white vinegar baking soda has become cloudy, this time it indicates that the rust has been dissolved, then wipe the rust with a steel wool ball, you will find that the rust is easily erased.

    2. Remove with white vinegar

    If you don't have baking soda at home, just white vinegar is also used to remove rust. After heating the iron pot, turn off the heat, then dip a little white vinegar on the rag and wipe the rusty parts with a rag, which can also remove the rust.

    3. Add salt to remove the potatoes

    Potatoes contain an amylase, which can decompose rust, and salt, which is coarse, can act as a friction agent, and the combination of these two ingredients can remove rust well. The method is also very simple, pour some salt into the iron pot, then take a potato, cut the potato and dip it in some salt, and use it to rub the rust.

    Fourth, use the peel to remove rust

    The flesh of pears is sweet, juicy, cool and delicious, many people love to eat them, after eating pears, don't throw away the peel in a hurry, use it to remove rust from the pot. The reason why the skin of pears can remove rust is because of the adsorption properties of the peel oil. Put the collected pear skin into the pot, add some water ** and boil, you can see that while the water is boiling, the rust in the iron pot is gradually removed.

    How to prevent rust in an iron pan:

    1. Don't be in a hurry to use the iron pot you just bought, wipe it dry after cleaning it with dish soap, and then put a small piece of raw pork in the pot, ** heat, while heating, add pork to wipe the iron pot, after the fat in the pork is fried, turn off the fire, and the lard will slowly dip into the pot to form a protective film, and then wash the pot again, it is not easy to rust.

    2. If the cleaned iron pot is placed flat, the residual water on the lid may drip into the pot, causing the iron pot to rust, so the cleaned iron pot can be hung up and placed to let the residual water flow out and avoid rust in the pot.

    3. After each use of the iron pot, it should be cleaned in time, and the inside of the pot should be wiped dry with a dry cloth, and it can also be placed on a low fire to dry the water, and there is no water stain in the pot, so it is not easy to rust.

    Once the iron pot is rusty, the rust should be disposed of in time to avoid the harm to health caused by ingesting rust during stir-frying. However, in addition to learning how to remove rust from the iron pot, we should also learn the correct maintenance method in the process of using the iron pot, and keep the iron pot dry as much as possible to avoid rust on the iron pot.

  13. Anonymous users2024-01-31

    Removing corrosive substances from metal surfaces is called rust removal, and there are five main methods:

    1) Manual rust removal. It is mainly a method to use a hand hammer, shovel, knife, wire brush, and coarse abrasive cloth (paper) to treat the metal surface with rust and meet the requirements of rust removal.

    2) Power tool rust removal. Also known as semi-mechanical rust removal, it is mainly a method of using air (electric) brush wheel or various derusting machines to treat the surface with rust and meet the requirements of rust removal.

    3) Jet or projectile rust removal (also known as sandblasting rust removal). Mainly with the help of oil-free compressed air (or high-pressure water).

    4) Chemical rust removal (also known as pickling rust removal). It is a method that mainly uses inorganic dilute acid solution to brush (spray) and soak the surface of the corroded metal and achieve the purpose of rust removal.

    5) Rust remover. It is mainly a method of brushing or soaking on the rusty metal surface with a weakly acidic chemical liquid (i.e., rust remover) to remove the rust on the metal surface through chemical reaction.

    According to different metal products and different needs, the most suitable method is the best way to remove rust. 】

  14. Anonymous users2024-01-30

    1. If the rust on the pot is not very deep, we can use the pot to boil a pot of water, and after the water boils, wipe it a few times with a dish towel, and the rust will disappear.

    2. Wash the pot with vinegar. Vinegar not only kills viruses, but the acetic acid contained in it can also react with the rust on the iron pan, causing it to fall off or disappear.

    3. Wipe with sandpaper or steel wool balls. The surface of friction paper or steel wool balls is very rough, and if you wipe it a few times, the rust will fall off.

    4. Wash the pot with dish soap, the dish soap generally contains acidic substances, and the principle of washing the pot with it is similar to washing the pot with vinegar, but the effect is not so good.

    5. Put the iron pot on the gas stove, turn on a high heat to dry, let the rust steam dry, and then, take the spatula a few more times and it will fall off.

    6. Soak the rice in a small bowl, and use the soaked water to wash the rusty iron pot, which is also easy to remove the rust, because the water that has soaked the rice is also acidic.

    As a traditional cooking tool, the iron pot makes meals with a small amount of iron, which can effectively prevent and treat iron deficiency anemia. However, after the rust grows from the improperly handled iron pot, iron oxide will cause discomfort to the human body, and in severe cases, it will also cause diseases of its own organs.

Related questions
19 answers2024-07-13

If you want to get rid of the smell of the toilet, you can look at the toilet directly, he has that toilet cleaner, you go directly to buy one and buy one online, and then go to clean it up The effect is better.

8 answers2024-07-13

Many newly purchased iron pots cannot be used immediately, and they need to be cleaned before they can be used for stir-frying and cooking. >>>More

6 answers2024-07-13

a. Rust removal method: Rust can be washed with 2 oxalic acid solution, and then wiped with water. After grinding 3-4 vitamin C tablets into powder, sprinkle them on the surface of the floor tiles, and then scrub them with water several times to remove rust stains. >>>More

14 answers2024-07-13

1. Under sandpaper grinding, just blow the air pump. It doesn't need to be clean. >>>More

16 answers2024-07-13

Pour hot water into the pot, heat and boil, in order to save energy, do not boil for too long, boil for 1 to 5 minutes, soak more, and finally use a shovel to gently shovel. >>>More