When decorating a new house, how can you make the bright line out of the dark line?

If you have bought a new house and now you are preparing to renovate the house, then we must find a professional team at this time, and we must also find a professional designer to help us with the design. We should do a good job of water and electricity before the house is renovated, so everyone must pay attention to these problems.

1. What should we do to make the bright line out of the dark line?

Each of our choices is different, so we must pay attention to these problems in life, but we don't need to feel too nervous, and we must pay attention to these problems in life, water and electricity installation is also a very important thing, if there is a problem with water and electricity installation, then our house will not be able to move in normally. If the renovation worker says that you need to walk the open wire, then we can also use some tools to hide all these wire heads at this time. So you don't need to feel very worried, and we can also tell the renovation workers about our needs.

2. What issues do we need to pay attention to?

Usually in life, we don't need to worry too much, and we must also pay attention to the relevant work at this time, if you don't know how to do it, then we can contact the renovation workers. We must also pay attention to these problems in our daily life, but we don't need to be overly anxious, and we all know that the house must be installed before the renovation of the water and electricity, if the house has a problem with the water and electricity, then we have no way to live in the house normally.

3. What should we do?

We must also pay attention to related issues in our daily lives, and we can also go to the Internet to check some information in advance. If you don't know how to do it, we can also show the design drawings to the decorators, and the decorators can understand them. Therefore, we must also pay attention to these issues, so that the overall layout will become very good-looking.

The sheath can be installed on the outside, the paint can be applied, the place must be reserved in advance, and then the joint should be fixed with adhesive, and the decoration style should be planned in advance.

The wall can be slotted and buried, and follow-up treatment must be carried out, and it must be planned and designed in advance, which will have a good effect.

You should understand the needs of decoration, pay attention to safety issues, and also pay attention to the situation of circuit decoration, do not hit the wall, you can use a line pipe to install the line in.

When many people decorate at home, they will be entangled because of the installation of wires, and they don't know whether it is better to install bright wires or dark wires. Everyone thinks that if you install a bright line, it will affect the appearance very much, but if you install a dark line, it is very easy to break, and it is not easy to repair. Today, I will tell you about whether you should take the bright line or the dark line when decorating the room?

When decorating, if you install a bright line, the cost of decoration is relatively low, and there is no need to slot and pre-buried pipes, if you understand the circuit, you can install it yourself. The open wire is also very convenient to repair, if there is a circuit failure, it is easy to find the problem point, and it can be replaced in time. Moreover, the line of the open line is very easy to change, and if the decoration style of the home is changed, it is obviously very easy to change the line.

However, obviously exposed to air and sunlight and moisture for a long time, the aging will be very fast, so it is very easy to short-circuit, and the bright line is exposed to the outside is particularly easy to be bitten by rats or insects, and it is easy to short-circuit, and the exposed outside of the bright line particularly affects the overall appearance of the room, if you accidentally touch it, there may be potential safety hazards.

When the dark line is installed at home, you can't see any line after installation, and the wall looks very neat and beautiful, because the dark line is buried in the wall, and there is the protection of PVC pipe, and the life of use is relatively long. Because the dark line will not be exposed to the air, it will not be easy for the elderly and children at home to touch, and the safety performance is very high. However, the design requirements of the dark line are very strict, so the installation is particularly time-consuming and laborious, more difficult, and the cost is relatively high.

If the dark line is broken, it is very troublesome to repair, and the difficulty and cost of repairing the line fault are also very high. If you install a dark wire at home, it will be very troublesome to replace the circuit in the future.

Nowadays, most homes are installed with dark lines, because they feel that the bright lines are not beautiful and safe, and the protective materials of the dark lines are generally very good and not easy to break. But what kind of installation you want depends on your preferences and family situation.

Answer: In the eyes of the decoration master, the bright line and the dark line have their own advantages and disadvantages, the cost of the bright line is small, which is conducive to later maintenance and decoration, and the heat dissipation is easy to replace, and the only disadvantage is that the decoration effect is not good. Some old electricians don't see this as such. Because it is necessary to do a good workmanship, the topstitch is also very beautiful.

From a safety point of view, the clear installation of wires will not only increase the probability of direct contact with human electrocution after wire failure, but also the probability of damage. Sometimes the wire is pressed as soon as the table is pushed. Water gushed out of the quilt and the wires were flooded.

Dark wires need to be slotted, so construction is definitely more difficult than surface loading. Construction costs have increased. I just said it.

Extend the deadline, which is easy to understand; The technical requirements for notch depth, wiring direction and other technologies are not something that ordinary people can do. In the project, it is difficult to install wires in concealed works.

One of the differences between bright lines and dark lines: decoration is not only safe, but also makes the house look good, improve the grade, the line will not damage the wall if it is broken, the threading can be repaired, reduce unnecessary losses, and the construction is more convenient. Difference Between Bright and Dark Lines 2:

Many people believe that the installation of dark lines is first of all troublesome in construction and has high labor costs, and secondly, there are half more dark lines than bright lines. Is that really the case? This seems to come as a surprise to many, and here I can give you a calculation of the economic accounts.

In other words, the cost of concealed wires is mainly the construction cost. But it is clear that installing wires is the cost of building materials. Bright wires require the use of BVVB or RVV wires, which are much more expensive than BV wires and BVR wires.

Many people say that the wires are safe, easy to maintain, and cost-saving! In fact, many people choose a nameplate when installing electricity, and if it is simple, fast, and open-wired, it is easy to find faults and also help to cool the wires. If you choose a dark wire, the wire will be damaged and it will be troublesome to repair.

However, the life of the open wire is not longer than that of the dark wire, which excludes the possibility of human damage, and the natural aging of the wire is faster, and the open wire is faster. This is because the air flow on the surface of the wire is rapid, the temperature changes significantly, and the aging speed of the line is accelerated. In general, if the life of the concealed front is 10 years, then the surface-mounted front will not exceed 7 years.

On the contrary, wires are discreetly laid in the walls and floors, which can effectively prevent damage from foreign bodies.

Some people will definitely say: after the wire walks in the dark line, the wire is aging, and it will be more troublesome to replace, but there is still a solution. Currently, the standard for the acceptance of water and electricity is that the wires buried in the wall wiring must be able to pull.

And the probability of problems with dark lines is still very low, so this problem will not happen too much, dark lines can not be seen from the outside, have no impact on other designs in the room, have a good decorative effect, and can improve the overall fashion sense of the space. But if a dark line is placed in a rural home, a problem arises. That is, the beams in the village are generally much higher, and it is more difficult to chisel out the notches.

Therefore, insiders say that considering the safety angle and aesthetics of electricity, it is best to set up wires with dark wires.

1. The wiring should be as horizontal and vertical as possible, and those who can go to the corner of the wall should go to the corner, so that it looks better.

2. There are many colors of the line, and the line used is as consistent as possible with the color of the wall, so that the layout can also greatly reduce the unsightly phenomenon!

3. If the line can go to a high place, don't go to the ground, the average person will not pay attention to it, and it can also be a good way to avoid the appearance of unsightliness along the wall!

4. Buy a little trunking and clips, it is best to also have horizontal and vertical wiring, since you can only walk the open line, it is better to wear the line slot, which is more beautiful!

5. After arranging the line, you can cover it with wallpaper to cover it so that it will not be so ugly.

6. Make more use of baseboards, and the wiring along the baseboard is more hidden, of course, it is also a better choice to use the back wiring of sofas and TV cabinets! If you really can't do it, make a shape, too, a good way!

Choose a good thickened and whitened PVC trunking, it seems that there is no substitute

No, unless, there is a dark line channel set up specifically for you. But do you think it's possible? This way any wall can have a power cord.

You can put it on the TV and watch it. Don't be afraid to facilitate repairs. Really.

Cut. I'm here to fuck you, shit. What's wrong with the inconvenience, it's not you who did it.

Isn't it just giving more money?

It's okay to replace PVC with aluminum grooves, but the cost has increased.

It is highly recommended not to take the bright line, unless you are renovating. Otherwise, it will only cost more money and increase the cost of later maintenance!

If you must take the bright line, it is good-looking, it is recommended that you use neat wiring, horizontal and vertical, and try to go to the corner. The effect that comes out in this way is also okay because it is very neat. All materials are the same, how can such a thick line pipe look good on the wall, walk neatly.

Ask how to arrange the office wiring.

Calculate the "wire consumption" of different specifications (thick and thin wire diameters) - main line, branch line, branch line, switch control line, etc.;

The main line refers to: the entrance line (from the place where the fire is set up to the location of the switch control box in your home) and the main transmission line (fire line, neutral line) that leads from the switch box to each room;

Split line refers to: from the main line "parallel" to the electrical appliances, sockets, including: interval control line;

Branch lines refer to: lines with different controls in the same section and area (including: switch control lines, emergency light lines, also called bypasses);

The wire diameter thickness of household electrical wiring (main line "copper core line") - generally 4 6m (excluding air-conditioning lines, air-conditioning lines need to be separately involved - the thickness of the wire diameter should also be calculated according to the "output power of air conditioning");

The formula for calculating the main line: a=p (kilowatts) kV); The result of the calculation is (current "ampere"); According to the size of the current (the maximum safe current-carrying wire diameter) - need to consult the table to get the "Building Electrical Installation Engineering Atlas".

Ask questions about lighting, computers, sockets, how big the wires to use.

Whether home renovation goes dark or bright, different people have different opinions. Some people think that the bright line is good, and it is considered that it is good to maintain it in the later stage; Some people think that dark lines are good because they can't see the lines and are more aesthetically pleasing.

Some people think that the cost of various decorations will be relatively small, and there is a good heat dissipation function, if there is a problem in the later stage, it is better to repair, and it will not produce too much rectification costs. As long as the topstitches are neatly arranged, it is also very beautiful. Nani?

Of course, it's better to pretend to be hidden! Otherwise, why is the home decoration mainly used in the dark line paving method, do you think the current owners and decoration companies are stupid?

Advantages of concealed wires:

1.Beautiful. The aesthetics of concealed wires are undoubted, and when the wires are buried, they cannot be seen from the outside, and do not affect the other designs in the room. In addition to wiring, there is also the installation of switches and sockets - you can integrate exposed wires into the room design, but you can never design surface-mounted switches and sockets as beautifully as concealed ones.

2.Safe. Surface-mounted wires, not only after the wire fails, the chance of direct contact with the human body increases the chance of electric shock, but also the probability of being damaged. Sometimes when the table is pushed, the wires are crushed; As soon as the water in the cup was spilled, the wires were soaked.

3.Life span. Excluding the possibility of man-made damage, the speed of natural aging of wires, and the faster surface-mounted wires. The reason for this is that the air circulation speed on the surface of the surface-mounted wire is fast and the temperature changes significantly, which accelerates the aging rate of the line. Generally speaking, if the life of the concealed wire is 10 years, the exposed wire will not exceed 7 years.

Many people feel that the installation of dark wires is more troublesome in construction and the labor cost is relatively high, and secondly, the concealed wires are more than half of the surface installation. In fact, the cost of concealed wires is mainly the construction cost. But surface-mounted wires are the cost of building materials.

Exposed wires require the use of BVVB or RVV wires, which cost much more than BV wires and BVR wires.

1. From the point of view of laying method, the method of laying the open line is actually more difficult than the laying of the dark line, and if the open line is laid well, it will be very good-looking, because there are strict requirements in the laying, especially the joint between the pipe and the pipe, as well as the distance between the pipe and the wall, etc. And since the topstitch is clear at a glance, there aren't many opportunities to cut corners.

In general, both have their own advantages, and the specific choice depends on the situation of your family.