How big of wire do you generally use to decorate your home? On what basis?

When the first thing to renovate is to renovate the water and electricity, it is estimated that most of our friends will replace the wires in the original home. When reconstructing a circuit, it is often necessary to reselect a set of wires. The incoming line is the indoor distribution box of our home.

That is, the line that leads from the bottom of the meter. This kind of wire is the bus for our indoor electricity. The thickness of the wires usually determines how much electricity we use indoors.

If the incoming cable can be replaced, it is personally recommended to replace it in the following way. In addition to household wires, the rest of the household wires are the wires that we use indoors. All wires in the opening under our indoor distribution box belong to the indoor power line.

For the choice of indoor wire thickness, I recommend the following method. The first is a 4 square copper core wire, and the second is a square copper core wire.

Other wires are rarely used, and we can choose in the following ways. The second place where the square copper core wire in the bathroom is more commonly used in home decoration is the family bathroom. At this time, the power consumption of all toilets is also a circuit, that is, the lighting and sockets of the bathroom are switched by leakage protection switches.

Control. Routing is more difficult. For example, when routing wires on a wall, slots are required. If the wire is thick, the grooving depth increases. When a wire passes through a pipe, the thicker and harder the wire, the more difficult it is to pass through the pipe.

In future maintenance, wires that are too thick will not be easily pulled out of the conduit. or replace a thicker threaded pipe; Or increase the amount of threading. For the commonly used 16 tubes, each threading tube can pass through three 4 square wires.

If you change to a 6 square line, only one can pass. Even if it is rich, using 10 square meters of wires throughout the house will not have the desired effect. This is because of the power system.

are tightly connected, and it is not possible to increase the current in the line simply by increasing the thickness of the wire on the power supply side.

Generally, a 5-meter-long wire is used, the wire must be thick, not very thin, and if it is made of aluminum, copper is also OK, the basis is that the longer the line, it is not easy to occur, circuit failure, and it is not easy to wind.

At present, the common wire specifications on the market are divided into square millimeters, square millimeters, 4 square millimeters, 6 square millimeters, 10 square millimeters, etc., according to the cross-sectional area of the conductor.

Lighting fixtures and other places with low electrical power are suitable for using wires in square millimeters;

There are circuit branches in the switch socket, which is suitable for the selection of wires in square millimeters;

High-power appliances such as air conditioners and refrigerators. The power of the main line of the circuit is relatively large, and it is best to use wires of 4 square millimeters and above;

The main line or the ** air-conditioning line has a large current carrying capacity, and the wire that is generally too thin can not bear it, so it is best to choose a wire of 6 square millimeters and above.

Lighting wires in your home.

Lighting wires are squared. Generally, the power of the home lighting load is not too large, and there are almost 6-8 lamps in the dining room, living room, main and secondary bedrooms, balconies, kitchens, and bathrooms, which are controlled within 1500 watts, and the square national standard copper wire is enough.

Wire for water heater socket.

The water heater is relatively large in household appliances, it is recommended to use 4 square wires, 4 square copper core wires can allow a maximum load of 7000-8000 watts, and the limit value is 8000 watts. Therefore, even if the water heater or bath bomb is turned on at the same time, there will be no major problems, and even if it is overloaded, it will only trip.

Wires for air conditioning outlets.

The air conditioner is also a high-power electrical appliance at home, so the socket is also a 4 square wire, of course, you can also use 6 square wires, but the construction difficulty of doing so will increase, and the area occupied by the socket bottom box will also become larger, and the wiring will become a very troublesome thing.

Wires for ordinary outlets.

The ordinary socket at home can use square wires, and the general load is controlled within 2500 watts. However, if you often use high-power electrical appliances, it is still recommended that you choose a 4 square wire.

Wires for kitchen outlets.

It is recommended to use 4 square wires for kitchen sockets, on the one hand, because there are many appliances in the kitchen, and on the other hand, because of the high frequency of use. Some kitchens are a square line to the top, and then arrange the socket below, with a square wire to connect the fire, all the sockets are connected from the square line separately, therefore, this practice is no problem.

With 4 6 10 square.

Jiangfan cable. The quality of Jiangfan wire is very guaranteed, it is used in major international engineering projects, the service life is very long, there will be no quality problems, everyone can rest assured when purchasing Jiangfan wire. The reputation in the market is very good, so there are many users who choose to buy Jiangfan wire.

Jiangfan Cable **** was established in May 2017. It is located in Yixing County, Wuxi City, Jiangsu Province, with a registered capital of more than 100 million. Jiangfan Cable is committed to manufacturing and selling wires and power cables, and can provide a full set of cable accessories such as cable joints and terminals.

Some of the company's production and testing equipment are imported from Finland, Switzerland, Germany and other countries, which realizes a strong guarantee for cable performance testing and testing.

Square wires for lighting in home decoration, 4 square wires for bathrooms, and 6 square wires for high-power appliances in kitchens.

Home decoration water and electricity installation is a very troublesome thing, because it is a hidden project, and it needs to be very careful in all aspects of Suihui. How big is the home improvement wire?

What size of wires are generally used for home improvement?

Generally, the socket is used for single-core square wires, single-core wires for air conditioners with more than 3 horsepower 4 square wires, single-core wires with 6 square wires for the total incoming wire, and two-color wires for grounding wires. Three rolls of different colors are used for a group of three coils (for neutral wire, live wire, ground wire) for lamps and lanterns for lighting, and two rolls are used for different colors as a group (for neutral wire and live wire).

Owners must understand a variety of specifications when choosing home improvement wires, so as to avoid buying suitable wires and bringing trouble to themselves.