How is the bathroom generally laid out? How to do a good job of dry and wet separation in the bathro

The layout of the bathroom generally needs to pay attention to the use of space and spaciousness, and now many small bathrooms are not only used for toilets, but also have the functions of toilets and showers, so it is particularly important in the layout, the most common is the layout of dry and wet separation, which is also the choice of most families. If you want to do a good job of dry and wet separation, the first thing that is more common is the shower curtain, which is relatively simple, and the cost is relatively low, it can separate the space, and it will not be so crowded, which is also more suitable for small toilets. There are also some families who may choose to use glass as a partition, which is more designed and cheaper, and some families may choose to use glass doors to separate the dry and wet areas of the bathroom, which is also suitable for larger bathrooms.

There is also a common partition wall, which will choose to use a stone wall to separate the dry and wet areas of the bathroom, and basically the practicality is not bad.

If you do a good job of separating dry and wet in the bathroom, it will make the whole bathroom look more beautiful, and you should know that if you often take a bath in the bathroom, it will fill the whole room with moisture, so that it is easy to make the air in the bathroom become very uncirculated and do a good job, and the separation of dry and wet can keep it clean and hygienic, and maintain an overall beauty of the bathroom. And if you always take a bath in the bathroom, like the bathroom, if you place some wooden cabinets, it is very easy to breed some bacteria, and it may also cause some bugs.

However, not all bathrooms are suitable for dry and wet separation, some people buy second-hand houses, so it is difficult to achieve dry and wet separation in the process of transformation, you must know that if you want to renovate the bathroom, the cost is relatively large, if for some people with insufficient budget, there may be some pressure. Moreover, if the bathroom wants to do dry and wet separation, the area requirements are still relatively large, otherwise it is easy to make the whole environment look more closed and crowded.

Finally, if you want to do dry and wet separation in the family, you still need to think clearly, and most families can directly choose the shower curtain if the cost is relatively low.

Make a partition in the bathroom, or you can also prepare a shower curtain, choose some longer lengths, so that when you shower, there will not be too much moisture, and it will not affect the dry environment.

The toilet is generally laid out according to the toilet in the back and the bath in front, and there must be a separating cloth to do a good job of dry and wet separation.

The layout of the bathroom is generally such that the toiletries and bathing place are close to the corner, the items are placed on the other side, and the washing machine is placed where there is drainage; Find a professional worker, find a professional team, find a guide by yourself, check online, and learn some tips.

The traditional toilet is usually the two modules of the handwashing station and the bath are together, which causes the bathroom to become more and more humid and the air quality is very poor.

Generally, it is an open layout, or a partition layout, depending on the design of the bathroom. Through the selection of materials for design, pay attention to the area of the bathroom, through the selection of materials, you can design a good separation of dry and wet.

If the space in the bathroom is relatively large, then dry and wet separation is generally carried out. The corresponding space can be divided and then isolated with a special waterproof isolation device.

Nowadays, the pressure of life is getting bigger and bigger, and there are all kinds of expenses continuously, which makes it difficult to buy a house in every home, so many families choose small houses in commercial and residential buildings in order to better reduce work pressure, which in turn causes the application space in commercial and residential buildings to be small, especially bathrooms. So today's problem comes, how to do a good job of dry and wet separation in a small bathroom area? At first, the overall interior decoration style of the bathroom was dominated by cool colors, namely:

Pale colors; Use less warm colors in bright colors, otherwise it will make the bathroom small to a certain extent, which is not conducive to the visual effect of the sense of space. Make effective use of built-in storage cabinets and walls. For example:

Cotton towel support frames, toiletries, toilet paper boxes, etc., have been placed in the wall as the dominant, so that the space in the wall can be maximized and the toilet application space can be vacated.

Of course, there is only one bathroom in a small house, and it is okay to live alone, but what if there are several people in the family and want to wash their faces together? At this time, the role of this wall is reflected, the brick wall blocks the view, so that one person brushes his teeth and rinses his mouth in front of the washing cabinet, and the other person can take a shower in the back, without interfering with each other, maintaining the personal privacy of both parties and reducing the sense of embarrassment. The toilet area is small, and doing three separations, or complete dry and wet separation, will make the toilet space smaller, and the application is inconvenient and uncomfortable.

Therefore, it is best to expand the application area of the toilet to expand the application area of the toilet by separating dry and wet in general. Able to use the bathroom doorway, bathroom living balcony, or other bathrooms adjacent to the space to expand the bathroom area. No matter how small the area is, it only needs to be effectively used, and it can also be used for dry and wet separation.

First of all, during the normal rush hour of work, the two functions of shower and face washing can be used at the same time, without interfering with each other, which fully improves the efficiency of daily life. And after separating the three major functions, the water in the shower room is not easy to flow into all the bathrooms, which can not only improve the anti-slip and safety factor of the ground, but also make it more convenient to clean up in the middle and later stages. And now the design style of the sink is becoming more and more diversified, in addition to being easy to use, it also increases the artistic beauty.

The easiest way is to assemble the shower curtain and assemble the road surface with the sun corner strip, but there are many defects, such as the sun corner strip will leak, and the shower curtain is wet and uncomfortable.

It is very simple and the most suitable is to make a glass partition wall, which can really separate dry and wet, and save space than using a solid line partition wall. Dry and wet separation in the bathroom has long become a development trend of our current design scheme. In the morning, two people can use the bathroom together, and when one person brushes his teeth and washes his face, others can also take a shower.

After the separation of dry and wet, the basin area will also become cleaner and easier to clean. Since the shower curtain is not resistant to surface water leakage, it is necessary to set the inclination in the shower areaMake the flowing water to the deodorant floor drain, or assemble a waterproof strip to resist the discharge of water. The part of the sun corner strip should be installed on the outer field of the shower curtain, so that the water will not easily flow along the shower curtain into the outside of the shower area.

Bathrooms can be arranged in such a way that wet and dry are separated. Knowing that the bathroom is now divided into three compartments, then the shower area and washing area are arranged, and then a glass barrier is placed in the middle, so that there is a better separation of dry and wet.

It is necessary to install a shower curtain and a sliding door, which is more clean and hygienic, and you can directly choose a glass partition for dry and wet separation.

First, let's talk about what is wet and dry separation?

The so-called dry and wet separation is to completely partition the function of the toilet to overcome the defects caused by dry and wet chaos in the past. Of course, dry and wet are only relative, and dry is not absolutely dry. Therefore, as long as the bathing and "convenience" are reasonably separated, so that the two do not interfere with each other, the embarrassment of splashing in the past can be completely avoided by taking a bath.

When it comes to separation, there are many ways. A separate shower room is the easiest way to do this. The first room you can choose from in the shower room is larger, and the space it occupies is smaller.

This is one of the most widely used methods for wet and dry separation. However, it is not practical for a bathroom with a bathtub installed. At this time, you can use a glass partition or glass sliding door to separate, put a bathtub inside, and a toilet and sink outside, so as to better achieve dry and wet separation.

The separation of dry and wet in the bathroom makes different spaces have their own place and does not affect each other, which really takes into account the subtleties and facilitates people's lives to a large extent.

The layout of the bathroom can take many forms, such as several sanitary devices organized in one space, or divided into several small spaces. It can be divided into three forms: independent, dual-purpose and folded.

(1) Stand-alone type. Toilets with separate bathrooms, toilets, and washrooms are called separate toilets.

2) Dual-use type. Sanitary ware such as basins, face washers, and toilets are installed in one space, which is called a dual-purpose type.

3) Folding type. The basic equipment in the bathroom, where some independent parts are placed in one place, is called folding medium.

4) Other layout forms. In addition to the above basic layout forms, there are many more flexible layout forms in the bathroom, which is mainly because modern has injected a new concept of the toilet and added a lot of new requirements. Therefore, in the decoration of the bathroom, we should not be confined to the rules, as long as we like it, it is convenient and practical.

This refers to the separation of the bathroom and the bathroom, so that it can be used well, and most of them will make a glass partition in the bathroom, so that it can be well solved.

In the design of the bathroom to do a good job of the division of the area, put the sink outside the bathroom door, so that can effectively do a good job of dry and wet separation, its layout is a long wash space, in the middle of the door to separate the two areas.

To choose the appropriate decoration style according to the area of the bathroom, it can be divided by the ground, which can be made into a zigzag method, the washbasin toilet and the shower room can be placed on a horizontal surface, and a glass cover can be set up in the shower room.

Nowadays people are paying more and more attention to decoration. The reason is that with the improvement of living standards, people's pursuit of quality of life is getting higher and higher, and some details of decoration are also paying more and more attention. Take bathroom décor as an example.

To achieve a decorative effect, some people choose to separate wet and dry, while others do not. The separation of wet and dry in the bathroom will make the bathroom look more beautiful and upscale.

The bathroom with separate wet and dry looks elegant and beautiful at first glance. It is usually designed, and this beauty is also reflected in the fact that after bathing, if there is no separation of dry and wet, it will flow to the ground and get wet everywhere. However, if you do wet and dry separation, it won't happen outdoors.

Separation of wet and dry in the bathroom will make the bathroom cleaner. In general, there will be shelves in the bathroom. Some homes may use iron, others wood.

However, no matter what kind of material it is, it can be damaged in a humid environment for a long time. Iron rusts and wood gets moldy.

Long-term dampness in the bathroom can also breed a lot of bacteria, so separating dry and wet will make the bathroom cleaner. It is common practice to use the shower room as a partition, separating only the wet area where the shower room is located from the remaining dry area. Suitable for larger restrooms.

The ** of the custom shower room is slightly higher. There are 3,000 10,000 on the market**, which can be selected according to your budget. Choose 3C-certified tempered glass and durable profiles to avoid hidden dangers and prolong the use of the shower.

Complete wet and dry separation is the process of moving the outside of the washstand to the aisle and dividing the restroom into two separate spaces. This approach can be said to be once and for all. It can not only expand the area of the bathroom, but also meet the needs of many people to wash at the same time.

The most important thing is to reduce the multiplication of bacteria. It is not afraid to put dental utensils directly on the laundry table. The separator can also be used directly for wet and dry separation.

If your home bathroom is large enough to accommodate a wall, you might consider using a half-wall to separate the wet and dry areas. When constructing a wall, the shape or storage area can be designed as needed to further enhance its effect.

You should choose dry and wet separation, you can move the sink in the toilet to the outside of the bathroom, so that the space in the bathroom will become very large, and at this time, the dry and wet separation will be particularly spacious, and you can choose some pebbles on the ground.

First of all, we can choose a corner of the bathroom, and then use glass to enclose this corner, so that you can do a good job of dry and wet separation, if you want to design better, you will design according to your own style, and then you can also draw some patterns on this glass. And be sure to do a good job of ventilation and exhaust holes.

The bathroom should choose dry and wet separation, which is more convenient, and the design style must be designed in a simple style.

Dry and wet separation should be chosen, and it is best to put the sink outside, so that it can be better used and can increase the utilization rate of the bathroom.

Because the indoor space is small, in the case of choosing floor tiles for interior decoration, choose the color that can make the interior space stand out as much as possible, choose white or bright colors as the dominant, and you can also choose warm floor tiles with warm colors as the dominant. Pay attention to the embedded power socket at the upper end of the washbasin in the bathroom, and it is convenient to assemble a smart mirror, which is an "artifact" to enhance the mood of the bathroom. Choose a floor-to-floor design for the wash basin as much as possible, and choose a countertop basin as much as possible for easy removal.

Traditional washroom design usually combines a washbasin area, toilet area, and shower area in one area. Although it is more convenient to apply, the damp and cold gas stays in the bath for a long time, which is very easy to cause gas pollution and its difficulty in purging. In order to improve the quality of everyone's daily life and create a healthy and clean bathroom, the design concept of dry and wet partitions has gradually become popular.

Nowadays, many washrooms in the home choose to assemble glass shower rooms. Due to the good lighting of the overall shower room, it is cost-effective, and the role of space utilization and dry and humidity protection is also very good.

Tempered laminated glass is widely used in glass shower rooms, and there is no need to worry about potential safety hazards. If you feel that the overall shower room is too rigid, you can choose to only use laminated glass to make a side of the decoration partition is OK. The view is stronger, and the visual effect also looks like the interior space is wider.

It is proposed to work with waterproof strips to achieve better dry and wet partitions. The dry and wet partitions of the bathroom can also choose wall decoration partitions, which is a very fashionable design scheme. Generally, there are three design schemes: parapet wall, half-wall and half-laminated glass, and a whole side of the wall.

If the area of the toilet is large, the partition wall does not affect the light, and does not care about the damaged part of the wall, you can use bricks to build half of the wall, and the upper part of the window with aluminum alloy profiles to completely separate the dry and humid. bathing and toileting, washing face and clothes outside; If the total area is sufficient, but the wall endangers the light, then you can make frosted glass sliding door partition dry and wet partitions, or you can use laminated glass brick walls to do dry and wet partitions; If the total area of the bathroom is not large, and you want to divide the dry and wet, you can use the bathroom shower curtain Yang angle strip method to separate the bath from others, which is very good.