Dripping lotus. Is it really dripping? What is Drip Water?

It's going to drip. When the air humidity is high, it is generally dripping in the morning. It was the dew that condensed on the leaves, and to a certain extent, the leaves could not bear it and fell.

Yes, our name is Dripping Guanyin. You can go to the florist and buy it.

In China's architecture, in order to prevent rainwater and other outdoor water from flowing down the balcony and window sill and eroding the wall, the concave components set at the lower edge of the balcony and window sill are called dripping. Dripping water belongs to the detailed structure of the building, but it is also an area that is often overlooked in building construction. It has the characteristics of small structure, simple structure and fine practice.

Answer: In the construction work, in order to prevent water from flowing from the vertical wall to the bottom side wall, the groove-like internal position arranged around the lower part of the structure is called a drip line (also called a drip tank). Generally, it is set up in awnings, windows, stair steps, balconies, parapet roofs and the waistline of protruding exterior walls. Generally, at the junction of the bottom surface and the outer wall, 1-2cm away from the corner, make a groove about 1cm wide, so that the water is cut off and will not flow inward.

1. Definition: In the construction project, in order to prevent water from flowing from the vertical wall to the bottom side wall, the groove-like part arranged along the lower part of the structure is called the drip line (also called the drip trough). Generally, it is set up in awnings, windows, stair steps, balconies, parapet roofs and the waistline of protruding exterior walls.

Generally, at the junction of the bottom surface and the outer wall, 1-2cm away from the corner, make a groove about 1cm wide, so that the water is cut off and will not flow inward. Second, the practice of dripping: 1. Grassroots treatment:

Generally, the drip line (groove) is made at the lower mouth of the window lintel, and if the concrete surface is very smooth, the surface should be "haired": one is "chiseling", that is, using a chisel to remove the smooth surface and make it rough and uneven. Another method is "fluffing", which is to apply a layer of 1:1 to a cleaned concrete surface by spraying it mechanically or with a broom

1. Porridge-like cement mortar (mixed with an appropriate amount of construction glue) to solidify it on the surface of the concrete, until it is broken by hand. 2. Paste the drip line (groove): according to the position line played in advance, the drip line (groove) is pasted with glue mortar, depending on the scene situation, about 50 80cm cloth a paste point, less than 2m of the window opening cloth 2 3 points, more than 2m of the window opening cloth 3 5 points.

3. The construction of the drip line (groove) should be carried out at the same time as the plastering of the outer edge of the building, when the exterior wall plastering is carried out to the bottom of the window opening or balcony, the plastering of the large wall outside the hole is completed first, and then the ruler board is turned over, the ruler board is sandwiched on the large wall surface that has been plastered, the groove of the ruler plate is facing inward, and the lower edge line is leveled with the drip line (groove) pasted in advance, and then the window is wiped out. 4. If you can't do the drip line (groove) (generally on the upper mouth of the outer window), the bottom ash has been wiped to the edge of the window, such as the use of steel and wooden windows, the window edge can be tightly sealed, such as the use of aluminum alloy or plastic steel windows should leave about 5mm grooves on the side of the window, so as to block the sealant; If you do a drip line (groove) protruding from the bottom (generally at the bottom of the balcony or rain cover), when the bottom mouth is plastered to a trowel width (about 8 10cm), from the outer wall to the inward position of about 5cm, cut it neatly than the ruler board, and then the iron trowel is calendered, and the small yang angle inside is straightened and calendered with a yang angle lutetium. 5. Water interception treatment

In order to prevent dripping water from "urinating the wall", the drip line (groove) should not be connected to the wall, and should be truncated 5cm away from the wall, so that the drip does not flow into the window (balcony) and cannot flow to the wall.

"Dripping Guanyin" belongs to the Araceae family, and many plants in this family can purify the air, but they are also poisonous. For example, pothos, konjac, wild konjac, banxia, etc. The juice of pothos is poisonous, and it will cause red itching when touched, and it will also cause sore throat if eaten by mistake.

But the leaves of this plant do not volatilize toxic substances.

Extended information: In the process of breeding, we need to understand the habits of bowl lotus, bowl lotus likes full sunshine and is not tolerant to shade. Likes moisture and is afraid of dryness, and likes relatively stable still water.

During the growth period, there is no need for fertilization. Excessive fertilization can lead to fertilizer damage. The bowl lotus is delicate and susceptible to frost damage. In winter, the bowl should be moved indoors to the sun, and a small amount of water should be added every week. Wait until the next year's Qingming to turn over the pot, take out the seed lotus, and replant.

The flowering time of bowl lotus is in summer, when the flowers are constantly blooming, bowl lotus can not be exposed to the scorching sun, and it must be shaded by strong light at noon to prevent the flower buds from retracting.

After the beginning of summer, watering once a day can make the bowl lotus grow normally. In the month when the water is not satisfied, it is watered to ensure continuous water every day, so it is watered twice a day, otherwise the standing leaves will wilt until they are dry and green. When there are duckweed, field grass, floating moss and green algae plants in the pot, it not only takes away the fertilizer, but also hinders the ornamentation, and the shading reduces the water temperature, so it should be cleaned up.

In addition, aquatic weeds should be carefully removed.

Finally, I would like to explain the most important one, if the leaves of the bowl lotus grow too much and too dense, you can properly remove some of the leaves, and the plant can breathe and breathe, which will also help to flower. When using the same container for multiple cultures, when it is found that the leaves have the phenomenon of competing for sunlight, they should be divided into pots in time.

What is a dripping lotus? Dripping Guanyin? The juice of the dripping Kannon and the water dripping from the leaves are poisonous, but as long as you don't eat it, you'll be fine.

The dripping lotus is the Araceae plant Alocasia, also known as the dripping Guanyin. It should be noted that the juice in the stem of the dripping Guanyin is poisonous, and the dripping water is also poisonous, and if you touch or eat the juice by mistake, it will cause discomfort in the pharynx and mouth, and there is a burning sensation in the stomach, so be careful!

It doesn't matter if you raise it, but don't eat its rhizomes and leaves, which contain toxic substances (of course, no one is so lacking in heart) If you have children at home, you should pay attention to it, and if you accidentally put it in your mouth, you should drink water immediately, and then send it to the hospital, it is best to put the drip lotus out of the reach of children.