How to clean the moldy leather ring of the drum washing machine

How to clean the dermatom inside the drum washing machine:

First, wipe the dirt on the surface of the rubber ring with a damp cloth moistened with water so that the rubber ring is also wetted. Then brush the moldy part of the sealing ring with a moldy remover and let it stand for 10 minutes after brushing. After ten minutes, scrub the area soaked in the preservative with a toothbrush.

Finally, use a rag to clean up the remaining dirt, so that the moldy part of the plastic seal of the washing machine can be cleaned.

It can also be wiped with a 2% soap alcohol solution, then wiped with 3%-5% sodium hypochlorite or hydrogen peroxide, and finally washed.

After washing your clothes, you can wipe the drum washer seal with a damp cloth. Also take care to regularly clean the inner and outer drums of the washing machine. The inner drum is the dirtiest part of the washing machine. It is recommended to soak it in the washing machine shower gel regularly and disinfect it regularly, otherwise it will cause secondary pollution.

Washing machine rubber ring cleaning utensils:

1. Detergent.

Use a soft cotton cloth dipped in some leather-specific cleaner and scrub gently. If it is too dirty, it is recommended to send it to a specialized leather goods maintenance shop for cleaning. After cleaning, the leather goods must be maintained accordingly, such as oiling, which is not too expensive.

2. Soap. If there are small stains on the silicone case, rub the area gently with your fingers dipped in water and soap, and then dry with a dry towel.

3. Alcohol. It can be gently wiped with alcohol and the effect is good. Then, wipe clean with a soft cloth or dry in a cool place.

4. Toothpaste. Clean the plastic seal of the drum washing machine with toothpaste and wipe it repeatedly with a lens cloth to achieve the cleaning effect. Toothpaste is a very good cleaning tool.

Moldy solution to the rubber ring at the mouth of the drum washing machine:

1. Go to the supermarket to buy a special detergent for washing machines, and add an appropriate amount of warm water and detergent to soak the rubber ring according to the service life of the washing machine and the amount of dirt. If the dirt is difficult to remove, it is recommended to soak it for more time, and wipe it with a rag after soaking;

2. If you don't find a special detergent, you can use disinfectant to wet the paper towel, apply it to the moldy part, remove the paper towel after a period of time, and then wipe it with a dry paper towel, you will find that the mildew has disappeared;

3. Soak the inner cylinder rubber ring for a certain period of time with vinegar and water dilution solution or lemon juice, and then it can play a certain role in decomposing the dirt, and it is easier to clean it;

Fourth, disassemble the inner cylinder rubber ring, and then use a brush (toothbrush is also OK) with toothpaste to clean, toothpaste has a good ability to remove dirt.

5. It is recommended to clean the inner cylinder rubber ring regularly in the future, preferably once every three months, and do not let the dirt stay for too long, otherwise it will not only be particularly troublesome to clean, but also may cause some damage to the rubber ring.

It is best to use 75% medical alcohol to wipe for a period of time to prevent mold from multiplying and prevent mildew, if you use it for a long time, there are mildew spots in the rubber ring at the mouth of the barrel, wipe it with 84 disinfectant solution to completely eliminate mildew, 84 disinfectant is a strong oxidant. It has the effect of disinfection, sterilization and bleaching.

To clean moldy drum washing machine rings, you need to prepare materials such as: rags, toothbrushes, and washing machine ring mold removers.

First, use a damp rag to wipe the moldy leather ring.

2. Then prepare 1 washing machine ring mold remover.

3. Sprinkle the mold remover on the leather ring.

4. Brush with a toothbrush.

5. Wipe the leather ring clean with a rag.

Sixth, this can solve the problem of moldy leather ring of the drum washing machine.

1.First, open the door of the washing machine and check the inside and outside of the rubber band for signs of mold.

2.Using a damp cloth or sponge, clean the surface of the rubber band. A mild detergent, such as white vinegar or alkaline detergent, can be used to remove mold and dirt.

3.If you find stubborn mildew spots, you can use some special detergents to remove them. These cleaners can be purchased in supermarkets or household goods stores.

4.After washing, use a clean towel or paper towel to wipe off the moisture on the surface of the rubber band.

5.Finally, leave the washing machine door open and allow the rubber band to dry sufficiently. This will prevent the rubber band from becoming moldy again.