How to clean the drum washing machine leather ring when it is dirty

Drum washing machine.

The inner dermatom molded cleaning method:

First, wipe the dirt on the surface of the rubber ring with a damp cloth moistened with water so that the rubber ring is also wetted. Then in the sealing ring.

Brush the moldy area with a mold remover and let it stand for 10 minutes after brushing. After 10 minutes, scrub with a toothbrush soaked in the preservative.

area. Finally, use a rag to clean up the remaining dirt, so that the moldy part of the plastic seal of the washing machine can be cleaned.

It can also be wiped with a 2% soap alcohol solution, followed by 3%-5% sodium hypochlorite.

or wipe with hydrogen peroxide and wash at the end.

After washing your clothes, you can wipe the drum washer seal with a damp cloth. Also take care to regularly clean the inner and outer drums of the washing machine. The inner drum is the dirtiest part of the washing machine. It is recommended to regularly soak in the washing machine with shower gel.

Medium, regular disinfection, otherwise it will cause secondary pollution.

What is the washing machine rubber ring used to clean and suit:

1. Detergent.

Use a soft cotton cloth dipped in some leather-specific cleaner and scrub gently. If it is too dirty, it is recommended to send it to a specialized leather goods maintenance shop for cleaning. After cleaning, the leather goods must be maintained accordingly, such as oiling, which is not too expensive.

2. Soap. If there are small stains on the silicone case, rub the area gently with your fingers dipped in water and soap, and then dry with a dry towel.

3. Alcohol. It can be gently wiped with alcohol and the effect is good. Then, wipe clean with a soft cloth or dry in a cool place.

4. Toothpaste. Clean the plastic seal of the drum washing machine with toothpaste and wipe it repeatedly with a lens cloth to achieve the cleaning effect. Toothpaste is a very good cleaning tool.

The sealing ring of the drum washing machine is also easy to get wet, so it is easy to get moldy and damp. After each laundry, it is best to open the lid and breathe, if you are diligent, you can wipe dry with the water of the rag sealing ring, the original mildew needs to be removed with the old housekeeper who specializes in removing mildew, the operation is quite simple, after applying, wait for 3 hours to wipe off the mildew and it will be gone, and it can also inhibit the mildew to grow again, and prevent mildew for a long time.

The musty smell of the drum washing machine can be treated in the following ways:

Method 1When the drum washing machine is found to have a musty smell, or the washing machine has been used for about 15 days, you can perform the high temperature self-cleaning function of the drum washing machine once or twice, then the water temperature will be heated to 95 degrees, and the musty smell can be removed by cleaning at a high water level.

Method 2There is a washing machine cleaner on the market**, buy a bottle of washing machine cleaner and clean the washing machine according to its instructions, and also remove the musty smell of the drum washing machine.

Method 3Rubbing the inner bucket of the washing machine twice with a soft cloth dipped in white vinegar can also remove the musty smell of the drum washing machine.

In addition, do not close the lid of the washing machine immediately after each wash, but let the inner bucket air dry. This prevents musty odors in the drum washing machine.

How to remove musty odor from drum washing machine:

1. According to the capacity of the washing machine, pour half a bottle to a bottle of edible vinegar, pour it into the inner barrel of the washing machine, add warm water to a height of 3 4 barrels, and soak for 2 hours;

2. Then start the washing machine and rotate for 10 20 minutes, and the dirt will fall off in fragments;

3. After the sewage is discharged, pour half a bucket of clean water, add 1 4 bottles of "84 disinfectant", and start the washing machine for 10 minutes;

4. Drain the sewage, and then add water to rinse the washing machine to remove the musty smell.

Causes of mold and odor in washing machines:

The inside of the washing machine is relatively humid, and it is easy to cause bacteria to multiply if not used for a long time. This is usually due to the composition of dirt in tap water, free matter from laundry detergent, cellulose in clothes, organic matter from the human body, and dust and bacteria brought in by clothing, which multiply and ferment at room temperature.

The most important thing to reduce the musty smell of the washing machine is to keep the barrel in the washing machine clean and dry. Daily use of the washing machine needs to pay attention:

1. Don't cover the lid of the washing machine all the time, and it's best to open it when you don't wash your clothes.

2. After washing clothes every time, you should put the water in the bucket clean, and then dry the bucket for a period of time, and wait until there is no moisture in the bucket, and then cover the washing machine lid. Of course, using a dry rag to wipe off the water droplets and moisture inside and outside the bucket will also help to eliminate moisture.

3. After each laundry, the filter in the machine must be removed in time for sufficient cleaning and washing. This will avoid stain build-up and contamination from your next laundry.

4. The sewage after washing should be discharged in time, and the seemingly clear water contains laundry detergent impurities, stain precipitation, etc.

I regularly find a clean rag to wipe it off, and don't close the observation window immediately after washing clothes;

Because the inside of the drum washing machine is very wet after washing, the observation window is half open to let the inner cylinder and window mat of the washing machine dry;

If you really don't worry, you can use a rag dipped in 84 to wipe the window mat of the drum washing machine.

The first method, and the easiest and most practical method, is to mix dish soap with water and wipe it off.

The second method, washing with soda, or with lemonade can also be used.

The third method is to wipe it directly with a wet towel, or buy some washing machine detergent.

In the future, every time you wash your clothes, open the hatch and close it after the water is dry, so that there will be no mold.

To clean moldy drum washing machine rings, you need to prepare materials such as: rags, toothbrushes, and washing machine ring mold removers.

First, use a damp rag to wipe the moldy leather ring.

2. Then prepare 1 washing machine ring mold remover.

3. Sprinkle the mold remover on the leather ring.

4. Brush with a toothbrush.

5. Wipe the leather ring clean with a rag.

Sixth, this can solve the problem of moldy leather ring of the drum washing machine.

If the leather ring of the drum washing machine is too dirty, you can use a soft-bristled toothbrush, and then enough to match some laundry detergent and white vinegar dish soap according to a certain proportion, and then use a toothbrush to brush it.

You can find some boiling water and add it to the drum washing machine, so that it spins quickly to remove the dirt in a hot environment, or you can manually disassemble the washing machine for cleaning.

If the apron of the drum washing machine is too dirty, a soft-bristled toothbrush, then enough laundry detergent and white vinegar detergent, according to a certain proportion, and then the toothbrush brushes.

First, use a damp cloth to wipe the moldy skin ring. Then prepare 1 washing machine ring mold remover, sprinkle the mold remover on the belt, scrub it with a toothbrush, and wipe the belt clean with a rag.

In this case, it is recommended to find the person in the washing machine they specialize in cleaning to repair, otherwise it is basically impossible to clean the machine by a single person.

Summary. Hello dear. Here's how to clean up dirt in a front-loading washing machine:

1. Pour a bag of washing machine detergent and an appropriate amount of laundry disinfectant into the drum. Note: It is inside, not poured into the laundry detergent separator box.

2. With the normal washing start function, it is best to start hot washing. After rotating in the washing machine for about 5 minutes, press the pause button to soak the detergent and disinfectant in the bucket for one to three hours, cancel the pause and continue to clean normally, then unplug the power 3, prepare a small basin and pour hot water, add clothes disinfectant and baking soda to mix together. Turn on the washing machine and dip a sponge in water to clean the plastic gasket on the edge of the barrel.

Hello dear. The method of cleaning up the dirt in the drum washing machine is as follows: 1. Pour a bag of special cleaning agent for the washing machine and an appropriate amount of laundry disinfectant into the drum.

Note: It is inside, not poured into the laundry detergent separator box. 2. With the normal washing start function, it is best to start hot washing.

After rotating in the washing machine for about 5 minutes, press the pause button to soak the detergent and disinfectant in the bucket for one to three hours, cancel the pause and continue to clean normally, then unplug the power 3, prepare a small basin and pour hot water, add clothes disinfectant and baking soda to mix together. Turn on the washing machine and dip a sponge in water to clean the plastic gasket on the edge of the barrel.

4. Remove the laundry filter, clean it in a small basin and then install it 5. Remove the faucet, soak it in the cleaning water in the small basin for a while, and then clean it with a small toothbrush and then install it 6. Turn on the power supply, and press the start button to clean and wash it again without adding anything in the bucket.

The drum washing machine is very dirty in the leather ring and can be cleaned with a sterilizing spray. Method steps: 1. Sterilization spray.

Use a special sterilizing spray, spray on the dirty area of the door seal, wait for half an hour to an hour, and then brush it off. Although this method can remove mold, waiting until mold has formed before removing bacteria will already have an impact on health.

2. Clean up in time. After each use of the washing machine, wipe the water in the folds with a towel and leave the door open for at least 12 hours. In this way, the occurrence of mildew can be avoided, that is, the operation is more cumbersome, and it must be cleaned up in time after each use of the washing machine.

This answer is applicable to Haier EG10014B39GU1 and Panasonic XQG100-SD139 brand washing machine failures.

Summary. 1. Turn off the power of the washing machine first, and then open the front door of the drum washing machine.

2. Take out the pressure spring of the rubber ring with needle-nose pliers, so that you can clean the dirt in the sealed rubber ring.

3. Fold the waste newspaper into strips, snap it into the gap between the drum and the rubber sealing ring, then turn the roller, repeat the operation several times, and the garbage will stick to the waste newspaper.

4. The cotton wool that is difficult to clean can be clamped out with tweezers, and then wiped clean with a wet rag.

5. After cleaning, reinstall the rubber sealing ring. The whole cleanup is done.

The drum washing machine ring is too dirty, is there any way to clean it?

1. Turn off the power of the washing machine first, and then open the front door of the drum washing machine. 2. Take out the pressure spring of the rubber ring with needle-nose pliers, so that you can clean the dirt in the sealed rubber ring. 3. Fold the waste newspaper into strips, snap into the gap between the drum and the rubber sealing ring, then turn the roller, repeat the operation several times, and the garbage will stick to the waste newspaper.

4. The cotton wool that is difficult to clean can be clamped out with the tweezers, and then wiped clean with a wet rag. 5. After cleaning, reinstall the sail and trapped rubber seal. The whole cleanup is done.

Pro-can be cleaned in the above way