What should I do if the electric kettle has been used for a long time and the water boiled out has b

This situation is the scale in the kettle, that is to say, the local water contains more alkaline substances, long-term accumulation on the wall of the kettle, the easy way is to add 9 degrees of white vinegar when the kettle is empty, and shake it, until the inner wall is all stained with white vinegar, 15 minutes later, add water to boil and pour out, so that you can remove the general alkali scale, if the alkali scale in the kettle is more serious, then add a bottle of white vinegar to most of the kettle water and soak it overnight, and boil it the next day and pour it out.

That's because impurities and minerals in the water form scale on the inner wall, and you can dirt with the following methods:

1. Lemon limescale removal:

Slice a lemon, put a part of it in the electric kettle and boil it once, let it sit for a while when the water is boiled, and then pour it out when it is cold, and the scale in it will fall off. This method is more reliable, and it is also very convenient and healthy.

2. Baking soda to remove scale:

Boil a pot of boiling water with an electric kettle, add a spoonful of baking soda after the water boils, and then boil for a few more minutes to remove the limescale. Or pour 500 grams of baking soda with a concentration of 1% and shake the electric kettle to remove limescale.

3. Vinegar scale removal:

Put in the white vinegar of 10% of the scale in the kettle, then fill with water and bring to a boil.

One or two hours or so, and then brush it is OK, and aged vinegar can also be used, but the effect of aged vinegar is not as good as white vinegar.

In addition, water purification equipment can be installed to purify water quality and reduce the formation of scale.

The water boiled by the electric kettle is turbid and can't settle down, so I don't know if it can be drunk? The water boiled by the electric kettle is turbid and can't settle down, so I don't know if it can be drunk? It's very turbid It's very clear when you get the water The electric kettle I just bought has no impurities, and I don't know if the water source is tap water or groundwater in the house I rented in the village.

Can you drink it? Cold water is clear and turbid, it should be groundwater, the hardness in the water is high, and it is easy to get stones if you drink more. If you really want to drink it for a long time, you can precipitate it, or install a household water purifier.

If there is a lot of limescale in the kettle, pour some vinegar and boil it.

Under normal circumstances, even if it is dry burned, it will not be damaged, because there is an over-temperature protection device, which will automatically protect and cut off the power supply when the temperature is too high.

In another case, the heating tube may be damaged due to dry burning due to the failure of the protective device, and the bottom of the internal pot may be deformed. In some cases, the high temperature causes the plastic base underneath to melt or burn.

There is a thermostat inside the electric kettle, which has the effect of preventing dry boiling.

As long as the anti-dry burning function is of good quality, there will be no problem and you can continue to use it.

If it is not usable, it is necessary to carry out overhauls, such as ablation of thermostat or switch contacts, and ablation of base contacts.

If the heating element burns out, there is no need to repair it.

The kettle, also known as the thermos kettle, was invented by the English scientist Dewar. In 1900, he made compressed hydrogen into a liquid for the first time, that is, liquid hydrogen. This kind of thing had to be bottled, but there were no such thermos flasks at the time.

He developed it himself. He used a vacuum, that is, a double-layer bottle, to remove the air from the compartment and cut off the conduction.

The modern thermos flask was invented by the British physicist Sir James Dewar in 1892. At the time, he was working on a work to liquefy gases, which were to be liquefied at low temperatures.

The first thing he needed to do was to design a vessel that would insulate the gas from the outside temperature, so he asked the glass technician Berg to blow a double-walled glass vessel for him, coating the inner walls of the two layers with mercury, and then removing the air between the two layers to create a vacuum. This kind of vacuum bottle is also called "Du bottle", which can keep the liquid in it unchanged for a certain period of time regardless of the temperature and heat.

If the kettle is dry, you need to wait for it to cool down naturally, and then check whether the bottom is deformed, whether the heating wire is burned, you can use the multimeter side to measure all the lines, if there is no problem, then use.

It should be fine, put some water and burn it again, check if it's broken, if it's not broken, there is no smell of burning in the place where the wire is plugged in, it should be fine, if you don't feel at ease, you can change it from a new one.

Mainly look at whether there is any deformation below, and try to boil the water again under the premise of paying attention to safety to see if there is any peculiar smell and whether the function is normal.

The reasons why the electric kettle will be full of water when boiling water are:

Before boiling the water, the kettle was a little too much water and exceeded the maximum safety line.

When the water is boiling, the liquid becomes a gas bubbling due to the boiling of the water, and the water goes beyond the kettle.

The electric kettle will be full of water when boiling.

1. When the kettle is filled with water, it will expand and overflow when it reaches more than 90 degrees Celsius by heating.

2. When the kettle is not filled very much, but only a little bit, when the water in the kettle reaches 100 degrees, it will boil, and the boiling water will come out very high (cm) and overflow.

3. When watering, you should not fill the kettle with water, leave more than 1 cm, and when the water reaches 100 degrees, it will not overflow.

If the water from the electric kettle has a burnt smell, you can use Coke to boil it, and the specific operation method is as follows:

Possible reasons are:

1. The heating plate is damaged.

2. The thermostat or temperature fuse is damaged, resulting in the heating plate not being energized. The thermostat or insurance must be replaced directly.

3. There is a high possibility of leakage, it may be a line, it may be an electrical appliance, and the power consumption during this period will increase the voltage of the small power grid, and some bad lines or electrical appliances will leak due to the increase in voltage.

4. The internal circuit is damaged, resulting in the heating plate not being energized. It is also a direct replacement line.

The scale in the kettle is mainly the combination of calcium ions, magnesium ions, carbonate ions and hydroxide ions in the water, and the generated calcium carbonate and magnesium hydroxide will also appear at room temperature. If the scaling is not very fast, it means that there are not too many calcium and magnesium ions in the water quality, and we can use descalers to clear it directly; It is also possible to use acidic substances for neutralization with scale, such as vinegar, but more slowly. Lowest cost of removal.

The reason for water quality, the tap water sources used in various regions are generally used in groundwater or rivers, lakes and seas, and the water company filters and purifies before giving it to thousands of households, after the electric kettle is used for a long time, the tap water will remain on the wall of the pot after boiling, which is a chemical change. In particular, the tap water used in many high-rise buildings is re-filtered.

This is because the tap water we drink comes from groundwater and is rich in minerals, both harmful and harmless. In particular, the water quality containing carbon and calcium substances is hard water, which is easy to adhere to the surface or bottom of the object, and when we use an electric kettle to boil water, it will leave sediment on the inner wall or bottom, which is called "scale". Dip a damp rag in baking soda and wipe the dirt from the kettle back and forth.

Rinse off with water after half an hour! Don't throw away the orange peel you have eaten at home. Put it in an electric kettle and put some water.

After boiling for 20 minutes, the limescale can be removed. Put some white vinegar in the kettle, then half a pot of water. After boiling, the limescale disappears naturally.

Add white rice vinegar to the kettle, add water, bring to a boil, and shake the kettle. Leave on for 10 minutes. Add descaler to the kettle and let it sit for 20 minutes.

Add baking soda and white vinegar and mix to use. Leave on for 10 minutes.

You can put a spoonful of baking soda in a kettle, then add water, stir it, and you can remove limescale.

In fact, we can pour an appropriate amount of white vinegar into the kettle, so that we can effectively remove the acid and alkali neutralization, the effect is particularly good, you can give it a try.

If you want to deal with the scale in the kettle, you can use some baking soda and white vinegar to soak in the kettle for a while, so that the scale will come off, and then wash it to be very clean.

At this time, you can put some descaling detergent in the kettle, and then soak it for a period of time, and rinse it with running water; And you can also add some white vinegar to this kettle, and it also needs to soak for a while.

You can put a spoonful of baking soda in the kettle, boil the water and the scale will come off by itself, or you can boil eggs in the scale, and the scale will also fall off by itself.

You can add some baking soda and white vinegar to the kettle, so that the limescale in the kettle can be cleaned and restored to a bright state.

You can buy something to remove dirt, sterilize and disinfect the kettle directly, and then drain all the scale.

Be sure to clean it regularly, and you can use some brushes to do a simple flushing, so that you can clean the scale underneath more quickly, so as not to cause some damage to our body.

Baking soda with vinegar, the perfect solution to your problem, can also be washed with dish soap, but it is better to add vinegar to baking soda.

You can change the water quality at home, you can install a water purifier to reduce these scales, and you can effectively protect the kettle.

The electric kettle is a household appliance commonly used in our lives, in the process of long-term use, the bottom of the kettle will produce a layer of scale, when such a situation occurs, we should clean the electric kettle. For the sake of our health, electric kettles need to be cleaned regularly, so what is the cause of limescale? What are the effective methods when cleaning?

Caused by limescale

The occurrence of limescale is mainly related to water quality.

If the water quality is hard, the oxygen content in the water is not enough, and the water is unstable, the solubility of calcium and magnesium ions in the water will decrease, and the deposition will be aggravated, and then scale will be generated. As long as the temperature exceeds 60, especially in the northern areas where the water quality is harder, there is no doubt that there will be scale, and there will be scale in the daily electric kettle and heating furnace. The solution is to clean up on time.

How to remove limescale

1. Put some shredded paper in the bottle, then pour in warm salt water, and shake it gently for a while to remove the scale.

2. You can pour 500 grams of baking soda with a concentration of 1%, or warm the edible vinegar into the bottle, shake it gently, and the scale can be removed.

3. Slightly break the 2 eggshells, put them into the bottle, then put them into the half tea jar of cold water, plug the bottle stopper and press it with one hand, hold the head and neck of the bottle stopper with your thumb and other fingers, and hold the bottom of the bottle with the other hand, turning and shaking back and forth, left and right. After about 20 seconds, remove the cork, pour out the egg shell, and then wash it twice with water.

4. Use 250 grams of vinegar, boil it and pour it into a boiling water bottle, soak it for a few hours, and then shake it left and right, up and down, and the scale in the bottle will fall off.

5. Take 200 grams of dilute sulfuric acid and soak it in the bottle for a while, and then shake it to eliminate the scale in the bottle.

6. Pour the water from boiling noodles into the bottle, shake it for a few minutes and throw it away, and then wash it with clean water to tidy it.

7. Take some sunrise leaves or pumpkin leaves and cut them into fragments with a thickness of 3cm to 4cm, put them into the bottle, add a small amount of cold water, gently shake the hot water bottle twice, and then wash it with water after exporting.

For what is said today, everyone has different opinions and ideas, you can leave a message to discuss together, looking forward to your reply! If you liked this article, don't forget to help like, comment, ** and bookmark.

The presence of limescale does not mean that the water quality is not good. Scale is actually a common name for mineral salt precipitation, and the main components are calcium carbonate, calcium sulfate, magnesium hydroxide, magnesium carbonate and other water-insoluble compounds. These solid compounds containing calcium and magnesium ions are not harmful to human health, so limescale water does not prevent drinking.

In fact, whether it is used for daily drinking or steaming food, mineral water containing trace mineral elements is the first choice, and these trace mineral elements are limescale**.

The presence of limescale after boiling water in an electric kettle has a certain relationship with the water quality of the area, but it does not necessarily mean that the water quality of the place is not good. The scale is due to the fact that the electric kettle has been used for a long time, and a thick layer of impurities will grow on the inner wall.

The reason for the formation of scale is mainly because of the hardness of the water, the more scale, the higher the calcium carbonate content in the water, and the higher the carbonate content in the water quality, the harder the water in this area, but the hard water will not have any effect on the health of the human body, but the taste of hard water is relatively not very good.

The amount of scale in the boiling water of the electric kettle is actually related to the quality of the electric kettle itself. Scale is the "remaining" precipitated material on the wall, only the wall is smooth enough, and the affinity between the material and the precipitated substance is relatively small, even if there is scale, it will flow away with the water, and will not form large lumps on the wall, if the quality of the electric kettle is good enough, it can even be done on the wall without scale residue at all.

Limescale is a precipitate of impurities in water that is harmful to people's bodies. So how should we remove limescale from an electric kettle? We all know that the main component of limescale is carbonate such as calcium carbonate, and the acetic acid in vinegar reacts with calcium carbonate to produce water-soluble substances and carbon dioxide gas.

So we can add a certain amount of white vinegar to the electric kettle, then fill it with water, boil it for about an hour, and then brush it to remove the scale in the kettle. In the same way, we can also add an appropriate amount of baking soda to the kettle, then fill the kettle with water, and gently shake the electric kettle after boiling, so that the limescale in the electric kettle can be easily removed.