Can you tell the growth of the orchid from the color of the leaves?

It is possible to judge the growth status according to its leaves, when the leaves are yellow, it is necessary to consider whether the water and fertilizer are in place and the intensity of sunlight, in the process of its growth, if the heart and eyes are yellow, narrow and thin, you should consider whether there is a lack of fertilizer.

I think so. If the color is bright and there are many leaves, it means that the growth is better.

If the leaves are full and fat, then it means that the plant is in good condition, the ornamental value is relatively high, the leaves are emerald green, and at the same time shiny, if the leaves appear yellow, it means that there is a lack of nutrients.

Summary. The growth process of the orchid.

1. After the seeds of germinating Junzi orchid are sown, as long as the temperature is more suitable, they can germinate in half a month. Do not look at it often after germination, so as not to affect its growth. Seeds at the seedling stage have a higher water requirement and need to keep the potting soil moist.

At this time, it is not suitable to be exposed to direct light, and long-term light is easy to burn the shoots.

2. About a month and a half after the long-leaved monarch orchid sprouts, it will grow out of the leaf bank. The leaves grow from here, and generally the real leaves can grow after two months, and the second leaf grows in five months. At this time, you need to take care of it, and no water can enter the leaf storehouse, otherwise it will cause it to rot.

3. The flowering leaves of the orchid will bloom when they grow to twelve, and its flowering period usually starts on New Year's Day and lasts until the Spring Festival. At this time it needs proper light and a warm climate, with a temperature of 18-28. Watering should not be too much so as not to flood the roots.

A little phosphorus and potassium fertilizer can be applied before flowering to help improve the quality of the flowers.

Fourth, the dormant monarch orchid will enter the dormant period in summer, at this time its demand for water and fertilizer is not high, and it should not be watered too much. In addition, because the light is very strong, it is easy to sunburn its leaves, so it should be placed in a cool place. At the same time, if the indoor temperature is too high, it will also be unfavorable for its growth, and it needs to be sprinkled with water to cool down.

Is the leaf growth point the tip of the leaf?

Hello dear <>

The growing point of the orchid is not at the tip of the leaf.

The growth process of the orchid.

1. After the seeds of germinating Junzi orchid are sown, as long as the temperature is more suitable, they can germinate in half a month. Do not look at it often after germination, so as not to affect its growth. Seeds at the seedling stage have a higher water requirement and need to keep the potting soil moist.

At this time, it is not suitable to be exposed to direct light, and long-term light is easy to burn the shoots. 2. About a month and a half after the long-leaved monarch orchid sprouts, it will grow out of the leaf bank. The leaves grow from here, and generally the real leaves can grow after two months, and the second leaf grows in five months.

At this time, you need to take care of it, and no water can enter the leaf storehouse, otherwise it will cause it to rot. 3. The flowering leaves of the orchid will bloom when they grow to twelve, and its flowering period usually starts on New Year's Day and lasts until the Spring Festival. At this time it needs proper light and a warm climate, with a temperature of 18-28.

Watering should not be too much so as not to flood the roots. A little phosphorus and potassium fertilizer can be applied before flowering to help improve the quality of the flowers. Fourth, the dormant monarch orchid will enter the dormant period in summer, at this time its demand for water and fertilizer is not high, and it should not be watered too much.

In addition, because the light is very strong, it is easy to sunburn its leaves, so it should be placed in a cool place. At the same time, if the indoor temperature is too high, it will also be unfavorable for its growth, and it needs to be sprinkled with water to cool down.

If you want to make it darker, don't let him get in the sun too often, in a cool place, the color of its leaves will be dark, and if you bask in the sun in a bright place, the color will be light.

The color of the leaves should be dark green. Its color should be green, yellow and black, and sometimes you can add some blue to the leaf part to adjust it.

How do you adjust the color of that leaf of the junzi orchid? I think that if you tone the color like this, it should be based on his nutritional value now.

Uneven leaf color? Look at these "2 points", correct it in time, and soon restore the junzi orchid In the usual maintenance process, its growing season is to enjoy the leaves, the flowering season, appreciate the time of its flowering, and the flowering is also very beautiful.

Some roots are hollow, and a small amount of them do not affect survival as long as they do not rot, but they reflect the lack of nutrients in the potting soil, and they need to be changed in time to change the nutrient soil (change the soil once every 1-2 years, and it is advisable to change the soil around April in the spring) to rot.

Whether the color of the orchid is intended to be used for painting or car paint, the modulation method is different.

You can absorb the color first and then mix it.

One is the variety, and the other is to increase the light.

The plant shape of the Junzi Bai orchid is dignified, the leaves are neatly arranged, and the leaf color is green

Moist, Su dao has the saying that the flower is better than the leaf appreciation, so the evaluation of the quality of the Junda Zilan variety, its leaves occupy a large proportion. So what are the characteristics of the leaves of the high-grade junzi orchid?

1. The leaves of the high-grade Junzi orchid should be short and wide, between 9 cm and 12 cm in length, and the ratio of length and width is within 4:1, and some varieties can reach 2:1 or even 1:1, such as Henglan.

2. The end of the leaf should be round, without sharp point, or even concave and flat. The leaf color is yellow-green and tender green, and the black and gray-green are the lower.

3. The leaf surface should have a good gloss, giving people a shiny and shining feeling.

4. The veins of the leaves should be conspicuous and convex, and form an obvious color contrast with the leaf surface, and the distance between the veins should be wide, with the "field" and "day" patterns as the top grade.

5. The blade should have a certain thickness, and the thickness of the middle and edge should be uniform. The leaves are elastic and feel hard and straight.

6. The distance between the leaves is uniform and parallel, and it is not stacked. The leaves are neatly arranged, uniform in size, not twisted, and there are no long leaves, so that it "looks horizontally like a fan, and looks sideways at a line".

7. The seat of the false bulb is preferably flattened ingot, followed by pagoda and fish scale. For the orchid, the veins on the leaves are required to be clear and the color is bright.

The above factors should be considered comprehensively, such as some varieties of Junzi Orchid although the leaves are very wide, but the leaf color is gray, dull, and sometimes there is a pleated phenomenon, it can not be regarded as a high-grade Junzi Orchid, and can only be used for hybridization and cultivation of new varieties.

Orchids are generally green with long round leaves and golden-yellow flowers.

Generally, no one can tell if it has never bloomed.

You can't see the leaves! Should look at leaf pants!

The leaves of the junzi orchid are not neat, you can use a small clip to clamp the crooked leaves with the normal leaves, which can improve the phenomenon of uneven leaves, and the position must be uniform and good, turn the position of the flower pot at any time, and you can also use some thicker paper to wrap the crooked leaves to improve the phenomenon of uneven leaves.

1. Manual trimming

If the leaves of the orchid are not neat, we can make some adjustments to it, use some small clips to clamp the crooked leaves with the normal leaves, in order to avoid the clips being clamped, we can put a paper towel in the middle, and the leaves will return to normal after a while.

2. Adjust the placement

Poor daily placement will also lead to the uneven appearance of the leaves of the orchid, which can be placed in the vertical position of the window sill, and the uneven light will lead to the uneven phenomenon of the leaves, so it is necessary to adjust the position of the orchid according to the turn of the sun, so as to improve the aesthetics of the plant.

3. Light control

We can control the light to make the leaves grow neatly, choose a few opaque tin foil or opaque thick pieces of paper, trim to the appropriate width and length according to the length of the leaves, fold the paper in half from the middle position, wrap the crooked leaves, and wait for about 10 days for the leaves to be corrected.

The phenomenon of uneven leaves of Junzi orchid is usually caused by poor placement and uneven light during the breeding process, so if you want to avoid this phenomenon, you need to place it in a well-lit environment, and rotate the pot with the movement of light, so that each leaf can grow evenly.

If the leaves grow irregularly, it is necessary to ensure that the leaves on both sides can be moistened with sufficient and uniform light, and turn the pot every 7 10 days. It can also be fixed by manual trimming or pinched with small clips. Using cardboard to make groove abrasives forces the orchid to grow in a fixed position, or to properly control the temperature, which naturally alleviates the uneven condition of the leaves.

The leaves of the orchid are not grown neatly, probably because they are not evenly exposed to light during the growth and development period. During the peak development period, rotate the pot every 7 to 10 days to let one side of the leaf grow towards the sun to ensure that the leaves on both sides receive light evenly.

For leaves that are not neat enough, the easiest way is to trim them by hand. Use a clean, clean, disinfected and sterilized sharp pruning knife to cut the leaves of the convex side of the orchid to the length of the other side. Or use small clips to clamp the crooked leaves together and fix them, and the growth trajectory can be restored after a period of time.

Using cardboard, cut off some grooves according to the appearance of the leaves of the orchid, and each leaf of the orchid is fixed into a groove, forcing the orchid to grow according to the position of the grooves in the cardboard abrasive. In this way, the leaves of the junzi orchid are forcibly adjusted to a neat and regular development trajectory, and the effect is very fast and obvious.

In fact, the change of temperature will also have a certain effect on the growth of the leaves of the orchid. The ambient temperature changes too quickly, and if the temperature is too high or too low, the growth activity of the leaves will be reduced, and the leaves on one side will be underdeveloped and look untidy. It is most appropriate to stabilize the temperature between 15 and 25.