What is the difference between the thin and thick tile method? What are the advantages and disadvant

What is the difference between the thin and thick tile method? What are the advantages and disadvantages of each?

What is the difference between thin and thick stickers?

1. Different bonding principles.

Heavy paste method: cement and sand need to be mixed with water to make cement mortar.

It is mainly used for attaching traditional superabsorbent ceramic chips. Relying on the absorbency of the ceramic shards, the cement is sucked into the bottom of the tile. After the cement hardens, numerous "small nails" are formed at the bottom of the tile to hold the porcelain tiles.

Dilute paste method: use special "tile adhesive" when paving.

Since tile glue is bonded by the force between molecules, it no longer depends on the water absorption capacity of the tile itself, which is more suitable for the current market environment.

2. Different technical level requirements.

Heavy build method: Experienced and skilled workers are required to pave the pile. On-site mixing of cement and sand is prone to problems, and has strong fluidity and randomness, which are characteristics that affect quality.

If the paving process is not in place, it is easy to cause problems such as tile hollowing and cracking, and it is difficult for the paver with poor technology to pave the tiles smoothly.

Slurry method: Due to the simple operation, the tile adhesive can only be mixed with water and used in the corresponding proportion. At the same time, with a variety of special accessories, there are no special requirements for laying experience and technology, and the tiles laid will be more flat and beautiful.

3. Different process requirements.

Heavy slurry method: the wall needs to be treated with a base layer before it can be paved; The porcelain tiles need to be soaked in water.

Thin paste method: In addition to the same need for base treatment and roughening of the wall, the flatness of the wall is very high, which requires fine leveling of the wall, and the tile only needs to ensure that the back is clean.

Advantages and disadvantages of thin bricks and thick bricks Advantages and disadvantages of thick bricks:

Construction** is cheaper than thin stickers. Floor tiles are better adsorbed to the ground. The thick slurry construction method has low requirements for ground flatness, which can make the floor tiles more flat.

Disadvantages of thick pulp: high requirements for construction personnel. If the construction personnel are inexperienced, the cement mortar ratio is wrong, or the process is not in place, it may lead to the problem of tile hollowing and cracking.

The heavy build method is more laborious than the thin paste method.

Advantages of thin stickers:

The adhesive used for ceramic tiles compared to traditional tiling methods*.

It has a better viscosity, so when applying tiles, you only need to brush a thin layer of adhesive on the wall and back of the tile to firmly stick the tile to the wall. Convenient construction. In the process of using tile adhesive, you only need to add water and stir, and it can be kept relatively uniform after stirring.

When laying tiles, not only does it have good adhesion, but it also prevents the tile from hollowing. In addition, the operation of the wall is very simple, which can increase the construction speed and shorten the construction period.

Disadvantages of thin stickers:

Compared with the traditional thick paste method, the cost of the thin pulp method is relatively high, mainly due to labor costs.

The requirements for the base are also high. If the wall or floor is uneven, it needs to be leveled first, otherwise the posting effect will be uneven. The traditional thick paste method is cheap, but there are certain requirements for the master's process, and the thin paste method of ceramic tiles has the advantages of good adhesion, but there are disadvantages of high base requirements and high cost.

The thin paste method needs to be paved with tile adhesive, while the thick paste method is paved with cement mortar. The paving process is different: the thin paste method needs to apply tile adhesive on the back and wall of the tile, and then use a toothed scraper to scrape out the lines, then pave the tile on the wall, knead and evenly pound it.

The thick paste method is based on the flatness of the wall, and the corresponding cement mortar is applied behind the tile, which can be paved directly without scratching.

Advantages of thin paste: easy construction, the tile adhesive used in the thin paste method is directly pre-configured by the manufacturer, no need to deploy, add an appropriate amount of water and stir evenly to use.

Disadvantages of thin pasting method: the cost is high, and the first grade of tile adhesive is higher than that of cement mortar, so the construction cost of using tile adhesive will be higher than the cost of cement mortar paving.

Advantages of thick paste method: low requirements for the flatness of the base surface, due to the large amount of cement mortar, the unevenness error of the original wall can be directly leveled when the tile is paved.

Disadvantages of thick paste method: high requirements for mortar, water mortar needs to be deployed on site, whether the cement ratio is reasonable, whether the amount of materials is in place, whether the mixing is uniform will affect the effect of cement mortar.

The difference lies in the thickness of the tiles needed. After installing tiles in different ways, they are more durable and sturdy to use.

When choosing tiles, you can choose thick or thin according to the size and material of the tile, and thicker tiles can be more stable and look stronger.

The advantages and disadvantages of thin and thick floor tiles are as follows: Advantages of thin floor tiles: 1

The construction is simple, time-saving and labor-saving, and does not require too much construction experience and skills; 2.Save materials, thin floor tiles can reduce the amount of bricks used and reduce costs; 3.It has a wide range of applications and can be applied to various grounds, including cement floors, wooden floors, carpets, etc.; 4.

It is suitable for use in the renovation of old houses, and can be directly tiled on the old ground without removing the old ground. Disadvantages of thin floor tiles: 1

The load-bearing capacity is weak, and it cannot bear excessive heavy items, which is prone to cracking, cracking and other problems; 2.The waterproof performance is poor, it is easy to get damp, seep into the water, and need to strengthen the waterproof treatment; 3.The durability is poor, and it is prone to problems such as cracking and falling off of the brick surface, and regular maintenance is required.

Advantages of thick floor tiles:1Strong load-bearing capacity, liquid front to withstand heavier items, not easy to crack, cracking and other problems; 2.

It has good waterproof performance and can effectively prevent moisture, water seepage and other problems; 3.Strong durability, long service life, not easy to crack and fall off the brick surface. Disadvantages of thick floor tiles:

The scope of application is narrow, only suitable for solid ground such as cement floor.

Both thin and thick floor tiles have their own advantages and disadvantages

Advantages of thin-tape tiles:

The construction is convenient and faster than that of thick tiles;

The cost is lower, and the ** with dust thin tile is generally lower than that of thick tile.

Disadvantages of thinly pasted tiles:

The compressive strength and wear resistance are relatively poor because the thin bricks themselves are thinner;

After laying the tiles with thin stickers and thick stickers, you can choose the right process according to your own ideas combined with the actual situation, before choosing the first thing to do a relevant understanding between the two, the following will introduce to you what is the basic concept of thin and thick tiles, what are the differences between thin and thick tiles.

First, what is the concept of the base mountain of tile thin and thick stickers.

The "thick sticker" of floor tiles is the traditional handicraft that everyone knows, and what is the "thin sticker" of floor tiles? The "thin paste" method originated from France, and the "thin paste" method uses adhesives, and after forming a pattern, the overall wall thickness is only 3 5mm, which can be regarded as saving indoor space. Thick stickers":

Water, cement and sand are prepared to make mixed mortar as the raw material of "thick paste", and the proportion of concrete, the dosage of the material and whether it is mixed evenly are all harmful to the quality of the mixed mortar and the quality of the tiles.

Second, what is the difference between thin and thick tiles?

1. The requirements for materials are different.

Thick paste method: it is necessary to mix cement and sand with water to prepare cement mortar, so whether the cement ratio is reasonable, whether the amount of materials is in place, and whether the mixing is uniform will affect the quality of cement mortar.

Thin paste method: tile adhesive is used when paving, which can be used directly with water, no longer need to be matched with cement mortar on site, the quality standard is easy to grasp, the bonding strength is relatively high, and the construction efficiency is also greatly improved.

2. The technical level requirements are different.

Thick paste method: experienced and skilled technical workers are required to pave the way, and the on-site mixing of cement and sand is prone to problems, and the mobility and randomness are relatively strong, which are the characteristics that affect the quality of Wang Qi. If the paving process is not in place, it is easy to cause problems such as tile hollowing and cracking, and it is difficult for the paving worker who is not in place to pave the living room tiles smoothly.

Thin pasting method: Due to the simple operation, professionally trained workers can use ready-mixed tile binder for paving, and the efficiency of paving is greatly improved.

3. The process requirements are different.

Thick paste method: the wall needs to be treated and brushed with the base layer, and the paving can be carried out after the treatment; Tiles need to be treated with water immersion.

Thin paste method: in addition to the same need to carry out base treatment and brushing of the wall, the flatness of the wall is required to be higher, and the wall is generally leveled, but there is no need to soak the tile in water.

4. The amount of labor is different.

Thick paste method: the general thickness is 10-20 mm, and the cement sand ash is 15-20 kg, which increases the burden. From the construction point of view, the bricklayer master wants to be beautiful and ensure the quality, usually about 8 square meters a day.

Thin pasting method: the thickness only needs 3-5 mm, there is an empirical data, the tile adhesive per square meter of area, the thickness of each millimeter is kilograms, that 3 mm is 5 kilograms. 5 mm is 8 kg. In the case of base leveling, it is usually possible to pave 20 square meters a day.

The above is what is the basic concept of ceramic tile thin and thick sticker, what is the difference between ceramic tile thin and thick sticker, I hope to help you understand the difference between ceramic tile thin and thick sticker, more decoration knowledge, decoration company evaluation, decoration case, please continue to pay attention to sleepy only such as.