How to replace the faucet handle when it is broken, and how to replace the switch handle of the fauc

Hexagon screwdriver.

Or a flathead screwdriver (depending on the actual situation) 1. Turn off the main switch of the faucet first, remember that otherwise it will be flooded. 2. Use a hex screwdriver or flathead screwdriver to remove the handle. If the faucet has been used for a long time, during operation, first drop some lubricating oil into it, the purpose is to make the rusty and tightened screws become more flexible, and for the screws hidden in the hole, first use a flashlight to observe to determine whether it is a hexagonal screw mouth or a slotted mouth, and then use the corresponding screwdriver to loosen, when all the screws are loosened, you can remove the handle.

3. Remove the metal shell at the connection of the faucet handle, which mainly plays a beautiful role. Use a pipe plier to screw and pay attention to holding the faucet when screwing, otherwise it is easy to damage the faucet or wash basin if you use improper force. 4. After disassembling it, you can see the handle of the copper core.

You can see that there is a hexagonal shape near the root of the handle, and you can clamp it with a wrench and unscrew it. When twisting, you still have to hold on to the faucet. 5. Install the new faucet handle in reverse operation according to the order of the previous dismantling.

Finally, the decorative metal case can be installed. The above content is an introduction to the relevant information on what to do if the faucet handle is broken, don't worry if the faucet handle is broken, you can easily install the faucet directly with the above methods.

First turn off the main valve, and then remove the broken part and replace it.

The switch handle of the faucet is replaced as follows:1. First of all, close the main valve of tap water.

2. Then use a screwdriver to remove the screws behind the handle.

3. You can remove the handle fixed to the faucet.

4. Some faucets do not seem to have screws on the surface, they are hidden under the plastic buttons, as long as the button is pried open, you can see the handle screws, and you can remove them.

Faucet is a popular name for a water valve, which is used to control the size of the water flow and has the effect of saving water. The replacement speed of faucets is very fast, from the old-fashioned cast iron process to the electroplating knob type, and then to the stainless steel single-temperature single-control faucet, stainless steel dual-temperature double-control faucet, kitchen semi-automatic faucet.

The specific steps to remove the faucet switch handle may vary depending on the design and model of the faucet, but in general you can follow these steps:

Turn off the water source: Before disassembling the faucet, make sure to turn off the water source to avoid unnecessary hassle and water loss caused by the water flow.

Look for set screws: Faucet switch handles are usually attached to a good nuclear spool by a single screw. This screw is usually located in a small hole at the bottom of the handle. Use a screwdriver or torque wrench to find the lead and unscrew the screw.

Remove the handle: Once the set screws have been removed, the handle should be easily removed from the spool. Some handles may require you to rotate counterclockwise or pull with a little force before you can remove them completely.

Pay attention to the order of the parts: When removing the handles, pay attention to the order of each part. Usually, there will be a decorative cover or mask on the handle, and below it is a handle base. Make sure to remember their correct order and position so that they can be assembled correctly when reinstalling.

1. Turn off the angle valve and cut off the water supply;

2. Open the faucet valve core: drain the water and relieve pressure to prevent the water from squirting out when the faucet is removed;

3. Disassemble the faucet hose counterclockwise from the angle valve: prevent the angle valve from being damaged when dismantling the faucet;

5. Remove the installation nuts of the faucet and the basin;

6. Remove the old faucet from the basin;

7. Put on a new faucet;

8. Open the angle valve to drain the water, remove the aerator group at the head of the nozzle and clean it, turn off the water and install it;

9. Turn off the faucet and check that the waterway does not leak (only wood).

If the faucet switch handle is broken, you can try to repair it with the following steps:

Turn off the water source: First, turn off the water source to prevent any water leaks.

Remove the old handle: Use a wrench or screwdriver to loosen the screws of the old handle and remove the handle from the faucet.

Check for Damaged Parts: Check for damaged parts on the handle. Usually the handle failure is caused by the wear or fracture of the internal plastic parts.

Purchase replacement parts: According to the inspection results, purchase replacement parts that are suitable for your faucet model.

Install the new handle: Install the new handle on the faucet and tighten the screws using a screwdriver or wrench.

Test the faucet: Turn the water back on and test if the new handle can turn the faucet on and off properly.

If the above steps cannot fix the problem, it is recommended to ask a professional plumber to carry out a wide inspection and repair.

The faucet is an indispensable hardware accessory in our daily life, and its handle is the part we contact the most, and it is also the most critical part. If the faucet handle is damaged, it needs to be removed and repaired. So how do you remove the faucet handle?

First turn off the main water valve, then stuff the screwdriver into the handle, slowly pry it up, pay attention to the force to be even, so that it can be removed. You can also unscrew the blue cap on the handle and loosen the screws on the inside of the handle, so that the handle can be easily removed.

How to choose a faucet.

1. Look at the height.

Pay attention to the height should be appropriate, so that it is convenient and practical. You can choose a higher faucet so you don't have to bend over when washing your hands or vegetables. If it is a kitchen faucet, it is best to extend the Li Qiao spout to the top of the drain, so that it is less likely to splash water.

If there are two hot and cold pipes installed, the faucet also needs to be duplexed.

2. Look at the length.

The length is also very important and should be chosen according to the size of the laundry sink or basin. If the kitchen is equipped with two basins, the faucets should be able to be freely selected so that both basins can be taken into account. Nowadays, many kitchen faucets are rotated left and right, and the water nozzle can be freely retracted, which can be rotated by 360 degrees, so that it can be cleaned to every corner of the basin, which is very convenient.

3. Look at durability.

Look at the processing process of the product, if the color is uniform and there is no color difference, it means that the quality is good, if the color is unevenly distributed, and there is a rough feeling to the touch, it may be a disadvantaged product, and you should buy it with caution. In addition, the lead content of the faucet is also very important, which is directly related to the safety of our drinking water. Therefore, when buying faucets, you should go through formal channels and don't be greedy for cheap.

The method of removing the faucet handle varies depending on the faucet model and construction. Here's a generic step that works with most types of faucet handles:

1.Turn off the water source: Before you start dismantling, make sure to turn off the water source from the faucet to prevent water leaks or other accidents during the disassembly process.

2.Check the handle fixation: Observe the structure around the handle to see if there are screws or other fasteners. If so, use a suitable tool (e.g., screwdriver, wrench, etc.) to unscrew it.

3.Remove the handle: If the handle is attached to the faucet body by threads or other tight side firmware, use a suitable tool (such as a screwdriver) to unscrew the handle. Make sure to use moderate force during disassembly to avoid damaging the handle or faucet body.

4.Check the inside of the handle: After removing the handle, observe the internal structure to see if there is any malfunction or damage. If there is any damage to the inside of the handle, you can replace the entire handle.

5.Replace the handle: If the handle is damaged or needs to be replaced, reassemble the handle in the reverse order of the disassembly process. Screw the new handle into the thread or use the corresponding fastener. Before reattaching the handle, make sure that the handle is properly attached to the faucet body.

Note that before disassembling the faucet handle, always consult the faucet manufacturer's instructions or seek help from a professional. Incorrect disassembly operations may result in damage or leakage of the faucet.