Choosing a university major, as well as graduate school questions, it is best to be a working person

1.Your first question is that this is difficult, which major can have no development potential? The main issue is personal development and achievement.

2.As for the graduate school entrance examination, the difficulty largely depends on which school and which major you apply for? If you are interested in going to graduate school, then you should start preparing in the second semester of your freshman year, and after passing the hard review, you will take the graduate school you are applying for, and then pass the re-examination.

As long as you review well, as long as it is not a famous school like Tsinghua University and Peking University, there is still a high probability of success.

3.Choosing a prestigious school or focusing on professional strength actually has its own pros and cons that need to be weighed. However, through my experience and the experience of others, it is the most pragmatic approach to take the major as the main consideration, supplemented by the school's profile.

Of course, your own interests and wishes are also important. There is also the employment rate and employment level of the school-based major to be considered.

Then I'm going to say that civil engineering is 20 in the country, to be honest, it's not really good, you have to pay attention to it.

4.As for which direction to choose for development, I am a student of civil engineering, in fact, because civil engineering is a very large category, which school is impossible to do all the directions well, but each has its own specialty, you have to see the school you apply for is good at that aspect. The salary is related to your position, but as far as the situation of fresh graduates after they are just employed, of course, the salary in design is the highest, and it is not generally high, and some are many times higher.

However, the design institute is not something that ordinary people can enter, and it must be those individual students who are extremely good and really powerful, and there are generally very few people recruited.

It is difficult to decide on the college entrance examination and career planning, so you have to consider it comprehensively and weigh the best choice based on your own situation.

The development prospects of the industry will be very good, and it also has the most development potential.

2.It should be more difficult to go to graduate school now, there are too many college students now, and the competition is fierce.

3.I think we should choose one with strong professional strength, because now this society pays attention to practical operation ability; I think it depends on your personal preference, but if you prefer the civil engineering aspect, you can choose the former.

4.You can choose the design of civil engineering, which is very good in terms of development, salary, and promotion.

There are two ways to apply for the examination: 1. What are the application requirements for part-time graduate students?

1. College degree, at least 2 years after graduation (from graduation to September 1 of the year of enrollment);

2. Bachelor's degree, no graduation requirements, fresh graduates can also apply for the examination (graduation certificate must be obtained before September 1 of the year of admission);

3. Those who have obtained a master's or doctoral degree.

2. What are the application requirements for applying for a master's degree with the same academic ability?

The same academic ability is exempted from the entrance examination, first participate in the course class, and only after meeting the requirements of the unified examination can you take the master's examination.

Course Study Conditions:

College degree or above.

Master's Exam Requirements:

1. Bachelor's degree, with a bachelor's degree for 3 years or more;

2. Although there is no bachelor's degree, but the master or doctoral degree has been obtained;

3. Foreign degrees need to be certified by the Service Center for Scholarly Study of the Ministry of Education.

In addition, it is also necessary to meet the scientific research achievements, and to make relevant achievements in teaching, scientific research, specialized technology, management, etc. For information about working graduate students, you can go to Social Science Saiss for an in-depth understanding. Social Science Sais, focusing on MBA EMA MEM MPACC postgraduate counseling for 19 years, is a national high-tech enterprise, and is a professional postgraduate examination counseling institution composed of MBA graduate graduates from Peking University, Tsinghua University, Nankai University, Shanghai Jiao Tong University and other famous domestic universities.

Its core business covers the whole process planning of postgraduate entrance examinations, teaching and research of postgraduate examination questions, planning and publishing of teaching materials, teaching practice of postgraduate entrance examinations, professional course counseling for graduate admission, planning and guidance for re-examination (interview), and release of postgraduate entrance examination information.

Based in Beijing, it has opened nearly 40 companies in major cities such as Shanghai, Tianjin, Nanjing, Suzhou, Hangzhou, Jinan, Wuhan, Changsha, Chengdu, Xi'an, Zhengzhou, Harbin, Shenyang, Dalian, Nanchang and Nanning, integrating the core resources of nearly 1,000 graduate training colleges and universities across the country.

Architectural and Civil Engineering Part-time Graduate Student Registration Requirements:

Candidates applying for the major of architecture and civil engineering are required to work for more than three years and should have a bachelor's degree and a bachelor's degree from a national education series university. The number of students without a bachelor's degree shall not exceed 10% of the number of admitted students.

The colleges that recruit part-time graduate students in architecture and civil engineering are: Tianjin University, Zhejiang University, China Agricultural University, etc., the following are the introductions of these institutions.

Tianjin University: A national key university directly under the Ministry of Education, its predecessor is Peiyang University, which is the first modern university in China. Tianjin University is one of the first 16 national key universities identified by the Communist Party of China in 1959, and is the first batch of key universities under the "211 Project" and "985 Project".

Zhejiang University: The Master of Engineering program at the School of Civil Engineering and Civil Engineering of Zhejiang University began in 1998 and is one of the first universities in the country to enroll students. After 10 years of development, our school has trained nearly 800 master's degrees in engineering, distributed in 31 provinces, municipalities and autonomous regions across the country, and most of the students have embarked on more important jobs and made greater contributions after completing their studies.

China Agricultural University: The predecessor of Jingshi University Tang Agricultural University is the birthplace of China's higher agricultural and hydraulic science education. China Agricultural University is the origin of modern agricultural higher education in China, and its history began in 1905 when it was established as Beijing Normal University.

China Agricultural University is one of the first batch of universities directly under the Ministry of Education under the "211 Project" and "985 Project".

1. In terms of school and professional strength, Tongji has a slight advantage. And you're reading structural engineering, not architecture. In terms of architecture, Southeast and Tongji have their own characteristics, but when it comes to structure, Tongji is obviously a bit better.

Regarding academic and professional training, the training goals are different, the former focuses on academic research, and the latter focuses on practice and work ability, but in fact, there is little difference in the training mode of the school. At present, professional master's degree accounts for less than one-third of the total number of master's students, but the trend is that the proportion of professional master's degree will increase, and this proportion will surpass that of academic master in the next few years. In civil engineering, a highly applied major, the recognition of professional master's degree is still relatively high, so there is no need to worry about the bad prospects of professional master's degree.

And if you don't study for a doctorate, you can still consider a professional master's degree.

Both options are actually very good, and it's hard for me to say which is more advantageous. But I'm from Tongji, and the School of Civil Engineering is in the main department, that is, in the urban area, so it's very convenient to go out and play in the future. If you want to experience Shanghai, come here...

The answers of the first two people are really biased, it's not that the southeast is bad, but you don't understand, you can look at how many academicians there are in the southeast building, and the strength of civil engineering is also very strong. Of course, Tongji's civil engineering is also very powerful, and it is also very famous in the industry. However, you have to figure out that there is still a big difference between academic and professional types, although the training model is basically the same in the past two years, and the number of corporate mentors is increased, but it is unknown whether the recognition level is the same on the employer's side.

The academic type is the ordinary master's degree mentioned earlier, which can be transferred to a doctorate or a direct doctorate; The professional type is the master of engineering, most of which are commissioned by the unit and jointly trained, if you want to transfer to a doctorate, the professional master is not allowed, and you can only take the exam after graduating from the master's degree. So let's think about it!!

What is the best choice for this, it must be to go to Tongji! Tongji's status and strength in the field of civil engineering and architecture are comparable to Southeast University! At present, Shanghai Construction Engineering, China State Construction, and some ** development offices and design institutes in Shanghai are almost monopolized by Tongji graduates.

But I don't think there's a need for graduate school in civil engineering. I am also a graduate of Tongji majoring in civil engineering.

Of course, Tongji is Tongji in terms of civil engineering, but there is nothing in Tongji now except for civil engineering. The three academicians of the southeast building, Academician Dai Fudong of Tongji, and Academician Wu Liangyong of Tsinghua University are all from the southeast, and they are comparable to Tongji!

Depending on the situation of your school, most of the undergraduates generally go to the construction unit, and a small number of people have the opportunity to enter the design institute through luck or relationship, and it is not recommended to go to Party A or the supervision unit as soon as they graduate. Graduate students can basically enter the design institute, and many colleges limit the minimum academic qualifications to 211 master's graduates. If all conditions (including family conditions, your own learning status, willingness, etc.) allow, it is recommended to take the postgraduate entrance examination, after all, the starting point should be higher, and don't feel that it will take 3 years to go to graduate school, delay time or something.

In fact, design institutions prefer undergraduate students who have spent time on the project rather than graduate students who only know how to read. I have two colleagues, both of whom have been working on a project in CCCG for a year, and now both of them are working in the design institute... The treatment is really good...

In fact, undergraduate students will have a great chance to stay in the program for three years... Personally, I don't think it's useful to go to graduate school...

A diploma is high, a diploma is low, the construction unit is reluctant to ask for graduate students, and the design unit is unwilling to ask for undergraduates, so it should be.

Differences: 1. Graduate students have higher academic qualifications, compared with undergraduates, when looking for a job, they are all hired by the company, while undergraduates go to the company for interviews. And when looking for a job, graduate students have more job options, while undergraduate students have a narrower range of job options.

2. The starting point of the job found by graduate students will be much higher, and generally after a few years of work, the salary and position will be much higher than that of undergraduates. And the nature of the work will be easier than that of undergraduates, and it will generally be a management position.

3. Graduate students can enter the formula that undergraduates cannot enter, such as scientific research institutions or enterprises designated as graduate students.

4. The probability of graduate students graduating from good schools entering state-owned enterprises will be much greater, while the probability of undergraduates entering state-owned enterprises without a relationship is not very high.

First of all, I can tell you for sure that the on-the-job graduate examination will have no impact on your future construction engineer registration. If you want to apply for the 2011 on-the-job graduate program, because you can't apply this year, you should apply for the on-the-job graduate students in October next year or May next year. I won't know until next year what majors will be recruited.

Therefore, if you choose to apply for the program this year, you can only choose to study in May, you can go to the China Working Graduate Student Network to take a look.

If you want to study civil engineering, you still choose an old civil engineering college, Southwest Jiaotong University civil engineering is a strong discipline, I hope the landlord can refer to it, thank you.

The time to complete the entire Master of Engineering course study and ** is generally 3 years, and its categories include Master of Law (Master of Education (Master of Physical Education, Master of Arts (MFA), Master of Engineering, Master of Agricultural Extension, Master of Veterinary Medicine, Master of Landscape Architecture, Master of Public Health (MPH), Master of Military, Master of Business Administration (MBA), Master of Accounting (MPACC), Master of Public Administration (MPA), etc. The national joint examination for in-service personnel to study for a professional master's degree is generally carried out in July and the examination is held in October. After graduation, you can only obtain a professional master's degree, not a graduate degree.

Choose a university that is right for you, in fact, the key is to study by yourself, and review to Xinhua Bookstore to buy postgraduate books.

Civil engineering.

It belongs to the first-level discipline There are six second-level disciplines below, roughly structural engineering, geotechnical engineering, roads and bridges, earthquake prevention and disaster mitigation engineering, etc., you study civil engineering, when you are an undergraduate, you will generally divide the direction, corresponding to the industrial and civil construction is structural engineering, and the others are the same, geotechnical is geotechnical engineering, etc., you can combine the direction of your undergraduate and your own interests or the relationship between this aspect of your own family, choose the specific direction of the postgraduate entrance examination, I hope it will help you.

1. The undergraduate major is civil engineering, and the majors that graduate students should take can be:

1) Civil engineering.

2) Geotechnical engineering.

3) Structural Engineering.

4) Municipal engineering.

5) Heating, gas, ventilation and air conditioning engineering.

6) Disaster prevention and mitigation engineering and protection engineering.

7) Bridge and tunnel engineering, etc.

2. Civil engineering not only refers to the materials and equipment applied and the technical activities such as survey, design, construction, maintenance and repair, but also refers to the objects of engineering construction. That is, all kinds of engineering facilities built on the ground or underground, on land or in water, directly or indirectly serving human life, production, military and scientific research, such as houses, roads, railways, pipelines, tunnels, bridges, canals, dams, ports, power stations, airports, offshore platforms, water supply and drainage, and protection projects.

3. The major aims to cultivate management talents who can meet the needs of modernization and can be engaged in the analysis and control of construction project investment, the determination and control of project cost, construction project bidding and project cost.

4. This major cultivates senior engineering and technical talents who master the basic theories and basic knowledge of engineering mechanics, fluid mechanics, geotechnical mechanics and municipal engineering disciplines, have the ability to engage in project planning, design, research and development, construction and management of civil engineering, and can engage in technical or management work in the design, research, construction, education, management, investment and development departments of housing construction, underground construction, tunnels, roads, bridges, mines, etc. Students in this major mainly learn the basic theories of engineering mechanics, fluid mechanics, geotechnical mechanics and municipal engineering, receive basic training in course design, test instrument operation and on-site practice, and have the basic ability to engage in the planning, design, research, construction and management of civil engineering.